Whirlpool RH4836XLT, RH4836XLS, RH4836XLQ, RH4836XLB, RH4830XLT Dimension Guide

...

29-7/8" (75.9 cm) model: RH4830 35-7/8" (91.1 cm) model: RH4836

7-1/2"

(19.1 cm)

1-1/2"

(3.8 cm)

1/2"

(12.7 mm)

(2.5 cm)

(15.2 cm)

(22.9 cm)

12"

(30.5 cm)

3/4"

(1.9 cm)

(5.1 cm)

17-1/2"

(43.2 cm)

1/2"

(12.7 mm)

PRODUCT MODEL NUMBERS OVERALL DIMENSIONS

VENTING REQUIREMENTS

RH4830XL RH4836XL

Electrical: 120-volt, 60-Hz, AC-only, 15-amp. electrical supply. Use copper wire only. A timedelay fuse or circuit breaker and separate circuit is recommended.

Convertible Range Hood

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.

Ref. 8285187

07-20-02

3-1/4" x 10" (8.3 x 25.4 cm) vent system

Recommended standard fittings

Maximum length = 50 ft. (15.2 m)

1 - 90° elbow = 5 ft. (1.5 m) 8 ft. (2.4 m) straight = 8 ft. (2.4 m) 1 - wall cap = 0 ft. (0 m) Length of 3-1/4" x 10" (8.3 x 25.4 cm) system = 13 ft. (3.9 m)

3-1/4" x 10" (8.3 x 25.4 cm) 90° elbow = 5 ft. (1.5 m)

3-1/4" x 10" (8.3 x 25.4 cm) flat elbow = 12 ft. (3.7 m)

3-1/4" x 10" (8.3 x 25.4 cm) wall cap =

0 ft. (0 m)

2 ft. (0.6 m)

6 ft. ( 1.8 m)

wall cap

3-1/4" x 10" (8.3 x 25.4 cm) elbow

7" (17.8 cm) vent system

90° elbow

wall cap

Maximum length = 60 ft. (18.3 m)

1 - 90° elbows = 5 ft.

(1.5 m)

1 - wall cap = 0 ft.

(0 m)

8 ft. (2.4 m) straight = 8 ft.

(2.4 m) Length of 7" (17.8 cm) system = 13 ft.

(3.9 m)

Recommended standard fittings

6 ft. (1.8 m)

2 ft. (0.6 m)

3-1/4" x 10" (8.3 x 25.4 cm) to 7" (17.8 cm) =

4.5 ft. (1.4 m)

90° elbow = 5 ft. (1.5 m)

45° elbow =

2.5 ft. (0.8 m)

3-1/4" x 10" (8.3 x 25.4 cm) to 7" (17.8 cm) 90° elbow = 5 ft. (1.5 m)

7" (17.8 cm) wall cap = 0 ft. (0 m)

7" (17.8 cm) round or 3-1/4" x 10" (8.3 x 25.4 cm) through roof

roof cap

24" (61.0 cm) to 30" (76.2 cm) above cooking surface

Round vent: Use 7" (17.8 cm) round damper (purchased separately)

Vertical roof venting

wall cap

3-1/4" x 10" (8.3 x 25.4 cm) through the wall

Horizontal wall venting

7" (17.8 cm) round or 3-1/4" x 10" (8.3 x 25.4 cm) through the wall

24" (61.0 cm) to 30" (76.2 cm) above cooking surface