Whirlpool PWF 3626, PWF 3646 Product Sheet

GB PROGRAMME CHART

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Programme

Care

Labels

Max. Load

- for temperature selection, respect the manufacturer's recommendations on the care

COTTON

95°C

COTTON

40 - 60°C

SYNTHETICS

30 - 40 - 60°C

DELICATES

30 - 40°C

DAILY LOAD

40°C

QUICK WASH

30°C

WOOL

COLD - 40°C

HANDWASH

40°C

LINGERIE

30 °C

RINSE & SPIN

SPIN SCHLEUDERN

GENTLE SPIN

DRAIN ABPUMPEN

i : option / Yes : dosing required

For improved garment care spin speed is restricted in these programmes

KOCHWÄSCHE

95°C

BUNTWÄSCHE

40 - 60°C

PFLEGELEICHT

30 - 40 - 60°C

FEINWÄSCHE

30 - 40°C

MISCHWÄSCHE

40°C

SCHNELLE

WÄSCHE 30 min.

30°C

WOLLE

KALT - 40°C

HANDWÄSCHE

40°C

DESSOUS

30 °C

SPÜLEN &

SCHLEUDERN

SCHON-

SCHLEUDERN

– 6.0

– 1.0

– –

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an oxygenbased bleach additive

6.0

which can be used at 95°C. This programme eliminates bacteria, ensuring sanitization of your laundry.

Normally to heavily soiled bed linen, table linen and underwear, towels,

6.0

shirts etc. made of cotton and linen.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,

3.0

Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

1.5

Slightly to normally soiled textiles made of cotton and/or synthetics.

3.0

Shortly worn outer clothing made of cotton, polyester, polyamide and

3.0

blends with cotton.

Only woollens with a felt-free finish, labelled with the woolmark and

1.0

identified as machine washable.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

1.0

This cycle is particurarly suitable to treat delicate lingerie (use of laundry net

1.0

strongly recommended).

Same as the last rinse and the final spin in the “Cotton” programme.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.

Type of wash / Notes

label

E. Programme selector

F. “Start” button G. Spin speed selector H. Programme sequence indicator I. “Reset” button J. “Start delay” button

Detergents and Additives

Pre-

Main

wash

Wash

Yes

– Yes

– –

Softener Pre-

wash

VOR-

WÄSCHE

i i

i i i i i i i i i i

i i i i

i i

– –

– – – – –

Rapid

KURZ

–

Start

delay

START-

VORWAHL

i i

Clean+

CLEAN+

K. Time display

Special options Max

Cold wash

KALT-

WÄSCHE

–

Intensive

INTENSIV-

SPÜLEN

rinse

Easy

ironing

LEICHT-

BÜGLEN

Rinse

hold

SPÜL-

STOP

i i i i

Variable

SCHLEU-

DERN

spin

Spin

Speed

rpm

Max.

–

i i i i i

–

– –

i i i i i

– –

–

– – – – –

i i

Max.

1000

Max.

1000

400

Max.

1000

– – – – – – –

5019 601 01019

CONSUMPTION DATA

Programme

Cotton 95 6.0 59* 1.90 2:00 Cotton ** 60 6.0 49 0.90 4:00 2:30 Cotton ** 60 3.0 37 0.69 2:20 ***

Cotton 40 6.0 54 0.65 2:45 1:45 Cotton ** 40 3.0 37 0.58 2:30 *** Synthetics 60 3.0 50* 0.70 1:30 1:09 Synthetics 40 3.0 46 0.50 1:15 0:54

Delicates 30 1.5 50 0.50 0:45 -

Daily load 40 3.0 45 0.45 1:00 -

Quick wash 30 3.0 40 0.40 0:30 -

Wool 40 1.0 55 0.60 0:45 -

Handwash 40 1.0 45 0.60 0:40 -

Lingerie 30 1.0 45 0.50 0:36 -

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data. The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). *

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. ** Reference programmes for Energy Label. *** Automatic adaptation of programme duration after detection of wash load

Temperature

(°C)

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergents as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

• Turn the programme selector to the desired programme and temperature.

• The time display shows the duration of the chosen programme (in hours and minutes), and the “Start” indication lamp is flashing.

• The indication lamp of the predefined spin speed lights up.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lamp lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt). Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the “Prewash” option.

“Rapid” button

• Enables quicker washing by shortening the

programme duration.

• Recommendable for small loads or only lightly soiled

laundry.

Load

(kg)

Water

(l)

“Clean+” button

• Choose this option if you use an in-wash additive for stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

• Use with the maximum load.

• Add an appropriate amount of in-wash additive for

stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

• May prolongs the programme by up to 15 minutes

• Appropriate for use of stain removers and bleaches

on oxygen basis. Chlorine or perborate bleaches must not be used!

“Cold wash” button

• Water is heated only up to 20°C.

• Suitable for delicate laundry items with wash

temperature recommendation of max. 30° on the care label.

• Selectable on the lowest temperature step of the programmes only.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

soft water, washing baby linen and helps people with allergies.

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun very gently.

Energy

(kWh)

without “Rapid”

Approx. programme duration

(hours : minutes)

without “Rapid” with “Rapid”

“Rinse hold” button

• The laundry remains in the last rinse water without pregressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone

spinning to a later time, or if you want to drain only.

• If you select “Rinse hold” do not leave items to soak

for too long. Note: The programme stops to “Rinse hold” at the time the “Rinse hold” lights in the preogramme sequence indication is on. The indication lamp next to the “Start” button flashes.

Terminate the “Rinse hold” option:

• Press the “Start” button; the programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start” button.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating “Start delay” option.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay

time by 1 to 23 hours.

• Press the “Start” button. The indication light next to the “Start delay” button lights up and the countdown of the delay time begins.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the “Start” button, the number of hours preselected can be reduced by pressing again the “Start delay” button.

To cancel the “Start delay” ..before you press the “Start” button:

• Turn the programme selector to another position or press the “Reset” button.

..after having pressed the “Start” button:

• Press the “Reset” button for at least 3 seconds - the start delay time disappears from the time display.

PROGRAMME START

Open the tap and press the “Start” button. The indication lamp next to the “Start” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The time display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component.

“Water tap closed”

The washing machine has no or insufficient water supply; the water tap might be closed or the water inlet hose kinked.

“Clean pump”

Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see “Cleaning the filter” in your Instructions for Use).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start” button to pause the programme. The light flashes.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the “Start” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press the “Reset” button for at least 3 seconds; “0:00” appears on the display. Any existing water is drained out before the door can be opened.

5019 601 01019