Whirlpool PWF 1746, ADN 651, ADN 650, ADN 628, ADN 627 INSTRUCTION FOR USE

...

60105201GB.fm Page 1 Thursday, April 29, 2010 3:13 PM

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

C D

}

A B

J L

E. Programme selector F. “Start” button G. “Spin” button H. Programme sequence indicator

I. “Reset” button J. “Start delay” button K. “Temperature” button L. Display

Programme

White Cotton Kochwäsche

Coloured Cotton Buntwäsche

Synthetics Pflegeleicht

Daily load Mischwäsche

Quick wash

Delicates Feinwäsche

Super Eco Eco Plus

Lingerie Dessous

Wool Wolle

Handwash Handwäsche

Rinse & Spin

Spin Schleudern

Gentle Spin Schonschleudern

Drain Abpumpen

optional / Yes : dosing required

❉

For improved garment care, spin speed is restricted in these programmes.

Schnelle Wäsche

30 Min.

Spülen &

Schleudern

Max.

Tempe-

rature

70 - 95 °C

20 - 60 °C

20 - 30 °C 20 - 40 °C

20 - 60 °C

20 - 30 °C

20 - 40 °C

Care

Labels

—— ——

——

Load

7.0

3.0

4.0

1.5

7.0

1.0

7.0

———

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0620

Type of wash/Notes

- Respect the manufacturer’s recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly to normally soiled textiles made of cotton and/or synthetics.

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses. Normally to heavily soiled and robust bed linen, table linen and underwear, towels,

shirts etc. made of cotton and/or linen.

Offers highest economy in energy consumption by prolonged wash duration. Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start Delay” accordingly.

This programme is particularly suitable to treat delicate lingerie (use of a laundry net strongly recommended).

Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

Textiles made of linen, silk, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.

Same as the last rinse and the final spin in the “Cotton” programme.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

Detergents and additives Special options

Pre-

Main wash

Yes

Yes Yes

Yes

Softener Eco

❉❉❉❉❉❉❉❉

❉

❉ ❉

❉

❉ ❉

wash

❉

—

❉

—

— —

— ——

—— ——— —— ——— —— ———

Pre-

wash

Eco

Vor-

wäsche

——

—— —

❉❉

——

—— ——

Start

Easy

delay

ironing

Start-

Leicht

vorwahl

bügeln

❉❉ ❉❉❉

——

❉

——

—

❉

——

❉

——

❉

——

❉

—

❉

———

❉

———

❉

—————

❉

Intensive

rinse

Intensiv

spülen

Rinse

hold

Spül-

stopp

Schleu-

❉❉ ❉❉

❉❉❉

❉❉ ❉❉

❉❉

❉❉❉

Spin

dern

❉ ❉

Max.

Spin

Speed

rpm

max.

1000

max.

400

1000

400

max. max.

1000

5019 601 05201

Black process 45.0° 150.0 LPI

60105201GB.fm Page 2 Thursday, April 29, 2010 3:13 PM

CONSUMPTION DATA

Programme

White Cotton 95 7.0 74

Coloured Cotton 60 7.0

Coloured Cotton with “Eco”

Coloured Cotton 40 7.0 69 0.75 2:05

Synthetics 60 3.0 46 Synthetics 40 3.0 42 0.40 1:20 Daily load 40 4.0 48 0.50 1:00

Quick wash 30 4.0 48 0.25 0:30

Delicates 30 1.5 60 0.50 0:45

Super Eco 60 7.0 69 0.84 4:00

Lingerie 30 1.0 45 0.45 0:36

Wool 40 1.0 60 0.55 0:45

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions applicable at that time. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. *** Reference Programme for Energy Label.

Handwash 40 1.0 45 0.55 0:40

***

Tem p era t ure

(°C)

60 7.0 54 1.05 4:00

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the

2. The

3. The indication lamp of the predefined

programme selector

The display shows the programme duration in hours and minutes as well as the predefined temperature. The button blinks.

temperature

“Temperature” button.

you want to set another spin speed, press the “Spin” button.

can be altered by pressing the

to the desired programme.

spin speed

lights up. In case

SELECT ANY DESIRED OPTION

Push the button of any option desired - the respective indication lights up. When the combination of programme and additional option(s) is

not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Eco” button

• With a modified temperature profile and a prolonged programme duration, the optimum combination of good washing result and lower energy consumption is achieved.

“Prewash” button

• Only for heavily soil ed lo ads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the Prewash option.

“Start”

Load

Water

(kg)

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and “Daily

• I ncreases the water quantity an d the clothes are sp un very gently.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

“Rinse hold” button

• The laundry remains in the last rinse water without

• This option is particularly recommended for the programmes

• It is particularly useful if you want to postpone spinning to a

• If you select “Rinse hold”, do not leave the laundry to soak for

Terminate the “Rinse hold” option:

•Press the

• If you do not wish to spin the clothes, turn the programme

Energy

(l)

(kWh)

2.10 2:10

54 1.19 2:20

0.80 1:35

load” programmes to make ironing easier .

water, washing baby linen and helps people with allergies.

progressing to the final spin cycle to avoid creasing and prevent colours from changing.

“Synthetics”, “Daily load” and “Delicates”.

later time, or if you want to drain only.

too long.

The programme stops to “Rinse hold” at the time the

Note:

“Rinse hold” light in the programme sequence indicator is on. The indication lamp next to the

“Start”

with the final spin cycle for the present wash programme.

selector knob to the “Drain” programme and press the

button.

“Start”

Approx. Programme Duration

(hours : minutes)

button blinks.

“Start”

button. The programme will terminate automatically

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin sp eed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay time by 1 to 23 hours.

•Press the The indication light next to the “Start delay” button lights up and the countdown of the delay time begins. The dot between hours and minutes of the indicated delay time as well as the light of the start delay button will keep blinking until the programme starts.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the preselected can be reduced by pressing and holding the “Start delay” button. From 1 hour on, the delay time can also be reduced by minutes.

To cancel the “Start delay” ...before you press the “Start” button:

• Turn the programme selector to another position or press the

“Reset”

...after having pressed the “Start” button:

•Press the delay time disappears from the display.

button.

“Start”

button, the number of hours

“Start”

button.

button for at least 3 seconds - the start

“Reset”

PROGR AMME START

Open the tap and press the next to the indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case,

an animation appears on the display

button lights up. The programme sequence

“Start”

button. The indication lamp

“Start”

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use. If the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap. If the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned. In the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

2. Select the new programme, temperature, any options and another spin speed if you want.

3. Press the at the same position where the previous programme was interrupted. Do not add detergent for this programme.

button to pause the programme. The light blinks.

“Start”

button again. The new programme continues

“Start”

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

•Press the

button cancels a programme before the end.

“Reset”

button for at least 3 seconds. Any existing

“Reset”

water is drained out before the door can be opened.

5019 601 05201

Black process 45.0° 150.0 LPI