PRODUCT MODEL NUMBERS OVERALL DIMENSIONS
CUSTOM PANELS
PVBN600
PVBC600
PVBM600
PVBS600
PVFE600
PVWC600
PVWN600
PVWM600
PVWS600
Electrical: 120-volt, 60-Hz, AC-only, 15- or
20-amp. electrical supply. Use copper wire only.
A time-delay fuse or circuit breaker and separate
circuit is recommended.
For wood or metal studded wall installations,
there must be 2 studs in the mounting area.
®
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. 8527389
10-15-02
™
Clothes Vitalizing System
overall depth
for all models
(incl. handle)
panel
except PVFE600 weight A dimensions
white doors 117 lbs. 15-1/4" —
biscuit doors 117 lbs. 15-1/4" —
wood panel doors 137 lbs. 15-1/8" 17-1/16" x
mirrored doors 143 lbs. 15-1/8"
35"
6 ft. power supply cord.
3-prong ground-type outlet
must be located within 5
feet of lower right corner.
Cut door panel as shown. If the
desired panel is greater than 1/4"
thick, rout a 1/4" thick edge, in 1/4"
from all four edges.
1" minimum
clearance
required at
bottom of
vitalizer for
ventilation.
57"
7/16"
9/16"
5-7/8"
8-7/8"
59"
A
30-1/4"
both
doors
90°
12"
*
* 12" minimum clearance to side wall
on left side of appliance is required
for air venting.
** 24" minimum clearance to ceiling or
any non-removable object (cabinet,
soffit, shelf, etc.) above vitalizer is
required for serviceability.
Model shown:
PVWN600
24"**
11-1/4"
52-13/16" x
1/4" thick
For models
PVFE600,
PVWC600,
PVWS600,
PVBC600,
PVBS600:
1/4"
52-13/16"
17-1/16"