Whirlpool PURE 2471 BL Product Sheet

GB PROGRAMME CHART
1
2 3
465
7
8
1. Programme selector
2. “Temperature” button
3. “Spin” button with “Rinse hold”
4. “Start delay” button
5. “Soil level” button
6. “Dosing aid” button
7. “Start (Pause)” button
8. “Reset/Drain” button
Programme sequence indication
“Soil level” indications
“Start delay” indication
“Child lock” indication
“Detergent overdosage” indication
“Dosing aid” indication
“Detergent calibration” indication
Failure indications (depending on the model)
/
Fabri cs
Colours
Eco Specials
Programme
Mixed
Cotton
Synthetics
Delicates
Wool/
Handwash
Mix
Gemengde was
Coton
Kookwas
Synthétiques
Synthetisch
Délicat
Fijne was
Laine/Lavage main
Wol/Handwas
White Blanc/Wit cold - 6 0 °C 7.0
Light colours
Dark
Couleurs claires
Lichte kleuren
Couleurs foncées Donkere kleuren
SuperEco cold - 6 0 °C 7.0
AquaEco cold - 4 0 °C 3.0
Speed 15
Bedlinen
Big Items
Rinse & Spin
❉: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in these programmes.
Rapide 15 ’
Snel was 15’
Literie
Bed linnen
Extra large
XXL
Rinçage&Essorage
Spoelen&Centrif.
Tem p e-
rature
Care
Labels
Max. Load
cold - 6 0 °C 6.0
cold - 9 5 °C 7.0
cold - 6 0 °C 3.5
cold - 4 0 °C 2.5
cold - 4 0 °C 2.0
cold - 6 0 °C 5.5
cold - 6 0 °C 5.0
cold - 3 0 °C 3.0
cold - 9 5 °C
cold - 6 0 °C 3.0
——
Type of wash/Notes
kg
3.5
7.0
- Respect the manufacturer’s recommendations on the care label
Lightly to normally soiled robust laundr y made of cotton, linen, artificial fibres and their blends.
Effective one-hour programme. Make sure to wash only similar colours together in one wash load.
Normally to heavily soiled towels, underwear, table and bed linen etc. mad e of cotton and linen.
Normally soiled garments made of ar tificial fibres (like polyester, polyacryle, viscose etc.) or their blends with cotton.
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles made of silk, linen, wool and viscose marked as handwashable.
This programme is tested and approved by The Woolmark Company for machine- and handwashable wool. Select spin speed according to the manufacturer’s recommendations on the care label.
Normally to heavily soiled and robust white cotton laundr y.
Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition to your detergent.
White and pastel shaded garments made of delic ate fabrics.
Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if necessary also stain removers or bleaches on oxygen basis. Do not use liquid detergent.
Black and dark garments made of cotton, cotto n blends and polyester.
Special programme to reduce colour f ading and local discolouration. Prefer to use a special liquid detergent for dark garments with this programme.
Heavily soiled and robust laundry, made of cotton, synthet ics and their blends.
Economical energy consumption by prolonged washing duration - Ideal to be run overnight to profit from more favourable energy rates. Avoid noise of spinning at night by setting the spin speed to “0” and start spin programme in the morning, or by defining programme start with “Start delay” accordingly. For garments with a high share of synthetic fibres, we recommend to use a laundry net.
Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.
Saving programme with a very low water consumption. Use liquid detergent and the lowest recommended amount for 3kg laundry. Do not use softener.
Briefly worn clothing made of cotton, artificial fibres and blends with cotton.
Refresh programme. Use lowest recommended detergent amount.
White and coloured bedlinen made of cotton and synthet ic fibres, or blends of both.
Reduces microbes and gently cleans, also delicate bedlinen, A thorough rinse phase helps to prevent detergent and pollen residues. Prefer powder detergent for this programme.
Blankets made of synthetic fibres; bedcovers filled with feathers, polyester or oth er artificial fibres; sleeping bags, bathmats and similar items.
Rinse and intensive spin programme.
Same as the last rinse and the final spin in the “Cotton” programme.
The wool/handwash cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled a s “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702
Detergents and additives Selectable options Dosing
Pre-
Main
wash
Softener Colour s 15°
wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Couleurs15°
Kleuren15°
❉❉ ❉❉❉❉❉
❉❉❉❉❉❉❉❉❉❉
❉❉❉❉❉❉❉❉❉❉
❉❉ ❉❉ — ❉❉❉ ❉
❉❉ —— ❉❉❉ ❉
❉❉ ❉❉❉❉❉
❉❉ ❉❉ — ❉❉❉ ❉
❉❉❉❉❉❉❉❉❉❉
❉❉ ❉❉❉❉❉
——— — ❉❉❉ ❉
❉❉——— — ❉❉❉ ❉
❉❉ ❉❉ ❉ ❉ ❉❉ ❉
❉❉ ❉❉ ❉ ❉ ❉❉ ❉
—— ————❉❉— ❉❉
Rapid
Soil
Pre-
Rapide
(Pause)
Snel
level
wash
Intensive
rinse
Tum b le
fresh
Start
aid
delay
Spin
5019 301 06555
Spin
Max. Spin
Speed
max.
max.
max.
1000
1000
max.
1000
1000
max.
max.
max.
max.
1000
max.
rpm
1)
1)
1)
1)
1)
CONSUMPTION DATA
Programme
Mixed 40 6.0 73 0.60 1:00 — Cotton 95 7.0 74** 2.10 2:10 — Cotton* 60 7.0 54 0.91 4:00 2:30 Cotton* 60 4.0 41 1.00 3:00 Cotton 40 7.0 69 0.75 3:15 2:15
Cotton* 40 4.0 49 0.60 3:00 Synthetics 60 3.5 46** 0.85 1:55 1:14 Synthetics 40 3.5 42 0.50 1:40 0:59
Delicates 30 2.5 60 0.40 0:45
Wool/Handwash 40 2.0 45 0.60 0:40
White 40 7.0 69 0.85 2:20
Light colours 40 5.5 70 0.50 1:20
Dark 40 5.0 45 0.60 1:40 1:15 SuperEco 60 7.0 69 0.84 4:00 — AquaEco 40 3.0 19 0.45 1:00 — Speed 15 30 3.0 30 0.20 0:15 — Bedlinen 60 3.5 60 1.30 2:00
Consumption values were measured in no rmalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the ene rgy consumption by reduced heating times, depending on the indiv idual hot fill inlet water temperature. Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data.
* Reference programmes for Energy Label. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained. *** Automatic adap tation of programme duration after detection of wash load.
Big Items 40 3.0 74 0.75 1:30
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).
Tem p er a tu r e
(°C)
ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. Turn the programme selector to the desired programme. The light of the “Start (Pause)” button blinks. The temperature and spin speed indicated on the display can be altered by pressing the “Temperature” button or the “Spin” button .
SELECT ANY DESIRED OPTION
When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically. For certain programmes, an option may already be preset. If you want you can deselect it.
“Colours 15°” button
• Saves energy used for water heating while maintaining a good wash result.
• Supports colour maintenance when washing coloured laundry.
• Recommendable for lightly soiled laundry without stains.
• Use special cold wash detergents with this option to enable a good wash result.
• Not selectable for Cotton 70 - 95°C.
“Rapid” button
• Enables quicker washing by shortening the programme duration.
• Recommendable for only lightly soiled laundry.
• Not selectable for Cotton 70 - 95°C.
Load
Wate r
(kg)
Energy
(l)
(kWh)
“Soil level” button
• Adapts the programme duration to the soil level of your laundry. Also influences the detergent quantity recommendation when using the “Dosing Aid” button.
= lightly soiled - = normally soiled - = heavily soiled
Not all soil levels are selectable for each programme.
“Prewash” button
• Adds an additional prewash cycle to the wash programme selected; prolongs the programme by about a quar ter of an hour.
• Recommended for heavily soiled laundry (e.g. with sand or granular dirt).
• Do not use liquid detergent for the main wash when activating the “Prewash” option.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft water or for washing baby linen, and helps people with allergies.
“Tumble fresh”
• Select this option if you cannot unload the laundry soon after programme end, or if you tend to forget the laundry in your washing machine. It will help to keep your laundry fresh.
• The washing machine will start to tumble the laundry periodically about one hour after programme end.
• The light of the “Tumble fresh” button will blink while this function is active, and the display will show “0:01” with blinking colon.
• The periodic tumbling will last up to approximately 12 hours after the end of your wash programme, and you can stop it at any time by pressing the “Tumble fresh” button. It will last a while until you can open the door.
• After the “tumble fresh” period has run out, the display indicates “End”.
Approx. Programme Duration
(hours : minutes)
without “Rapid” with “Rapid”
“Spin” button (incl. “Rinse Hold” )
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is cancelled, and the water is drained out only. However, intermediate spin phases remain during rinse.
• If you select “Rinse hold” , the laundry remains in the last rinse water without progressing to the final spin cycle, to avoid creasing and prevent colours from changing. To activate the “Rinse hold”, press the “Spin” button repeatedly until the “Rinse hold” symbol on the display lights up.
- The wash programme stops to “Rinse hold” when the “Rinse hold”
symbol on the display blinks. The light of “Start (Pause)” button blinks as well.
- To terminate the “Rinse hold” by draining the water, without any
spinning, press the “Start (Pause)” button.
- To terminate the “Rinse hold” by spinning the laundry, press the “Spin”
button to select the desired spin speed and then “Start (Pause)” to start the spin cycle.
- Do not leave the laundry to soak for too long in the “Rinse hold”.
SET A START DELAY
The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.
• Select programme, temperature, spin speed and options.
• Press the Start delay button to select a delay time up to 23 hours.
• Press the “Start (Pause)” button . The countdown of the delay time begins. The clock symbol next to the delay time and the colon between hours and minutes blink.
• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.
• If you use the “Dosing Aid” button: select the delay time BEFORE pressing the “Dosing Aid” button. The countdown of the selec ted delay time begins after having pressed the “Start (Pause)” button for the second time (see separate Instructions for Use concerning the “Dosing Aid”).
To cancel the “Start delay” ...before you press the “Start (Pause)” button:
• Press the “Reset/Drain” button , or set the start delay time to “0:00” - the delay time disappears after a few seconds.
...after having started the programme:
- Press the “Start (Pause)” button - the delay time disappears from
the display. Press “Start (Pause)” again to start the selected programme immediately.
DETERGENT DOSING RECOMMENDATION
With the “Dosing Aid” button, you can make your washing machine indicate you the recommended detergent quantity for your wash load, depending on the soil level selected and the size of the load.
• Helps to save detergent and protect the environment and also sensitive skin by avoiding detergent overdosing.
• Before you use this function, you must adapt the washing machine to the dosing amounts which are recommended for the detergents you use. Also check if your region’s water hardness corresponds with the water hardness level “soft” of your washing machine - if not adapt it.
• Select programme, options and start delay BEFORE using the “Dosing Aid” button.
For any details, refer to the separate “Dosing Aid” Instructions for Use.
“DOOR OPEN” INDICATION
Before starting a programme, the symbol lights to show that the door can be opened to add more washing. As soon as you press “Start (Pause)”, the “Door open” indication goes off and the door will lock until the end of the programme. Do not try to open it by force. If you have to open it urgently during a running programme, refer to “Reset a running programme before the end”. If you try to start a wash programme and the door is not properly closed, the “Door open” indication will blink.
PROGRAMME START
Open the tap and press the “Start (Pause)” button . The blinking “Start (Pause)” button light becomes constant. The “Door open” indication goes off, and
the wash symbol lights to indicate that the programme is in process. In some phases, the remaining programme time is newly calculated - if this is the case, the “6th sense” indication on the display will fade, and the remaining programme time is replaced by an animation.
CHILD LOCK
Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock:
• Turn the programme selector to a programme position, or run a programme as usual.
• Press the “Temperature” and the “Spin” button simultaneously for a few seconds. The “Child lock” symbol will shortly blink and then light up to indicate that the child lock is active.
The programme setting cannot be changed anymore. The only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock, proceed in the same way as for activating it.
FAILURE INDICATIONS
If one of the failure indications on the display lights up, refer to the “Troubleshooting Guide” in your “Instructions for Use”.
PROGRAMME END
• The display shows “End”, and the “Programme finished” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
• Leave the door ajar to allow the drum to dry.
• If you do not turn the programme selector to the “Off/O” position, all lights of the control panel go out after a few minutes to save energy - only “End” will remain on the display.
DETERGENT OVERDOSAGE INDICATION
The symbol will light up at the end of the programme if you used too much detergent. Use less detergent next time. If the symbol lights up and the display shows “Fod”, too much foam interrupted the wash process. Refer to the “Troubleshooting Guide” in your Instructions for Use.
CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START
1. Press the “Start (Pause)” button to pause the programme. The light
blinks.
2. Select the new programme, temperature, any options and another spin
speed if you want.
3. Press the “Start (Pause)” button again. The new programme
continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.
RESET A RUNNING PROGRAMME BEFORE THE END
The “Reset/Drain” button cancels a programme before the end.
Press the “Reset/Drain” button for at least 3 seconds. An
animation appears on the display. The water is drained out. It may last some time until you can open the door.
5019 301 06555
Loading...