Whirlpool PTL 810, PTL 1010 INSTRUCTION FOR USE

GB

A. Programme selector
B. “Start Delay” button
C. Programme sequence indicator

(over the line)

Start delay indicator (next to the line)
D. “Variable spin” button
E. “Start/Pause” button
F. “Reset” button
G. “Door open” indication

PROGRAMME CHART

I

J

B

D

This washing machine is equipped with

C

G

automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately:
H. “Service” indication

H

F

A

E

I. “Water tap closed” indication
J. “Clean pump” indication

1)

Do not use liquid detergent for main wash if you

have activated prewash option.

2)

Do not use liquid detergent.

3)

For improved garment care, spin speed is restricted

to 400 rpm in this programme.

Programme

Cotton

40 - 60 - 95 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

20 - 40 °C

Handwash

30 - 40 °C

Rinse & Spin

Spin

Gentle Spin

Bawełniane

40 - 60 - 95°C

Syntetyczne

30 - 40 - 60°C

Delikatne

30 - 40°C

40°C

Szybkie 30min.

We³niane

20 - 40°C

Pranie ręczne

30 - 40°C

Płukanie i

wyrowanie

Wyrowanie

Wyrowanie

delikatne

Care

Labels

Max.

Type of wash / Notes

Load

- for temperature selection, respect the manufacturer's recommendations on the care

kg

label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.

5.5

made of cotton and linen.

Detergents and Additives Special options Max.

Pre-

Main

wash

Wash

1)

Yes

i

For washing heavily soiled laundry, the “Prewash” option can be selected.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),

3.0
polyamide (Perlon, Nylon).

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

i

i

Yes

Yes

1)

1)

3.0 Slightly to normally soiled textiles made of cotton and/or synthetics. – Yes

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with

3.0
cotton.

Only woollens with a felt-free finish, labelled with the woolmark and identified as

1.0
machine washable.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

1.0

A very gentle spin is used in this programme.

– Yes

– Yes

– Yes

– 5.5 Same as the last rinse and the final spin in the “Cotton” programme. – –

– 5.5

In this programme spinning is intensive. Same as the spin cycle in the “Cotton”
programme.

– – –

– 1.0 In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. – – –

Softener Start

Delay

Opóźnienie

startu

i i

i i

i i

i i

i i

i i

i i

i i

i

i

Pre-

Rapid

wash

Pranie

wstępne

2)

Szybkie

i i i

rinse

Płukanie

intensywne

Intensive

Eco

Eco

i

95°C

Variable

spin

Wirowanie

i

Spin

Speed

rpm

max.

only

2)

i i i

i

60°C

max.

i

only

2)

2)

2)

2)

i

2)

– – –

– –

– –

i

i

– – – –

– – – –

– –

i

– – – –

– – – –

max.

i

–

–

–

max.

i

max.

i

max.

i

3)

400

i

max.

i

max.

i

max.

i

Drain

Wypompowanie

– – Drain only - no spinning. – – –

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

i

– – – – – –

5019 812 10045

CONSUMPTION DATA

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

Duration

(hours : minutes)

Cotton 95 5.5 55* 1.75 2:05

Cotton** 60 5.5 49 0.93 2:45

Cotton 40 5.5 55 0.55 2:10

Synthetics 60 3.0 54* 0.90 1:40

Synthetics 40 3.0 48 0.55 1:25

Delicates 40 1.5 50 0.55 0:45

Daily load 40 3.0 40 0.45 1:00

Quick wash 30 3.0 35 0.40 0:30

Wool 40 1.0 55 0.55 0:45

Handwash 40 1.0 40 0.55 0:35

Prewash cycle increases programme duration by aproximately 20 min. Consumption values were measured in normalized conditions in
compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to
the water supply pressure and temperature, the load and the type of wash.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water
out.
** Reference Programme for Energy Label.

PREPARATION OF THE WASH CYCLE

1. Load the machine, close the drum doors and check
that they are properly locked.

2. Add detergent and additives into the dispenser to
no more than the “MAX” level mark, as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Stain remover agents

• Anti-scale agents (if necessary)

3. Close the lid.

4. Turn the programme selector to the desired
programme and temperature. The lamp next to the
“Start/Pause” button flashes. The indication lamp
of the predefined spin speed lights up.

SELECT THE DESIRED OPTION(S)

Selecting or deselecting an option can be done at
any time during the programme. The option will be
applied as long as the corresponding programme
phase has not been executed yet.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. Increases the cycle time by
approximately 20 min.

“Rapid” button

• Reduces water consumption, above all during rinsing.

• Suitable for lightly soiled laundry and small loads

(max. 3 kg).

“Intensive rinse” button

• The amount of water is increased to ensure a more

intensive rinse.

• This option is particularly suitable for areas with very
soft water, washing baby linen and for people with
skin allergies.

“Eco” button

• With a modified temperature profile and a slightly

prologned washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.

• Selectable for programmes Cotton 95ºC and
Synthetics 60ºC only.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during
the rinse. The water is drained out only.

START DELAY

The “Start delay” button allows the user to run the
machine at his convenience, for example at night when
electricity is cheaper.

• Select programme, spin speed and options.

• Press the “Start Delay” button several times to

select a delay time of 1, 3, 6, 9 or 12 hours.
The corresponding indicator lamp lights up.

• Start the programme (see “Progremme Start”).
The indication next to the “Start delay” button lights
up and goes off when the programme starts.

• Once having pressed the “Start/Pause” button,
the countdown of the time delay begins. When the
programme starts, the start delay indicator light
goes off and is replaced by the programme sequence
indication.

• After the “Start/Pause” button has been pressed,
the number of hours preselected can be reduced by
pressing again the “Start delay” button.

To cancel the “Start delay”
..before you press the “Start/Pause” button:

• Turn the programme selector to another position
or press the “Reset” button.
..after having pressed the “Start/Pause” button:

• Press the “Reset” button for at least 3 second. The

start delay indicator light goes off.

PROGRAMME START

Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button
lights up. The programme sequence indicator shows
the current programme phase, running from left to right
through Wash, Rinse, Spin/Drain. When the programme
phrase is finised, the corresponding indication goes out.

• Note: If there is a power interruption or if the
appliance is disconnected during the cycle, the
programme will run again from the point where it
was interrupted.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp
lights to show the the lid can be opened. As long as a
wash programme is running, the lid remains locked and
must on no account be forced open. In case you have
an urgent need to open it during a running programme,
refer to “Cancel (Reset) a running programme before
the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused
by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for Use”;
if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open
the water tap: if the indications still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned: in the
latter case refer to the Instructions for Use (“Removing
the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator

are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O”
position.

2. Close the water tap.

3. Open lid and drum and unload the machine.

4. Leave the lid open for some time to allow the
interior of the machine to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the
programme. The light flashes.

2. Select the new programme, any options and another
spin speed if you want.

3. Press the “Start/Pause” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END

The “Reset” button cancels a programme before the
end. Press the “Reset” button for at least 3 seconds.
Any existing water is drained out before the door can be
opened.

5019 812 10045