Whirlpool LOE 1050 INSTRUCTION FOR USE
GB LOE 1050
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean filter” indication
Programme
Cotton with prewash
95 °C
Cotone con
prelavaggio
95 °C
Care
Labels
PROGRAMME CHART
G
C
D
E
Type of wash / Notes
- for temperature selection, respect the manufacturer's recommendations on the care label
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen,
underwear, shirts etc.).
E. Programme selector
F. “Start/Pause” button
G. Programme sequence indicator
A
B
H. “Reset” button
H
F
Max.
Detergents and Additives Special options Spin
Load
Pre-
Main
wash
kg
5.0 Yes Yes
Softener Intensive
Wash
1)
rinse
Risciaquo
intensivo
i i i
Spin
speed
reduction
Riduzione
centrifuga
500 giri
Speed
rpm
1000
Cotton
40 - 60 - 95 °C
Synthetics with prewash
60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
30 - 40 °C
Rinse & Spin
Spin
Gentle Spin
Drain
i : option / Yes : dosing required
1)
Do not use liquid detergent in the main wash.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
Cotone
40 - 60 - 95 °C
Sintetici con
prelavaggio
60 °C
Sintetici
30 - 40 - 60 °C
Delicati
30 °C
Rapido
30 °C
Lana
Freddo - 40 °C
Lavaggio a mano
30 - 40 °C
Risciacquo &
Centrifuga
Centrifuga
Centrifuga delicata
Scarico acqua
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and
linen.
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon)
or blends with cotton.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon)
or blends with cotton.
Curtains and delicate clothing, dresses, skirts, shirts and blouses. 1.5 – Yes
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. 3.0 – Yes
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable. 1.0 – Yes
Textiles made of linen, silk, wool and viscose marked as “handwashable”. 1.0 – Yes
– Same as the last rinse and the final spin in the “Cotton” programme. 5.0 – –
– In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. 5.0 – – – –
– In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. 1.0 – – – –
– Water is drained only without any spinning. – – – – – – –
5.0 – Yes
2.5 Yes Yes
2.5 – Yes
i i i
1)
i i i
i i i
i
i
i
i
i i i
1000
1000
1000
–
–
–
i
i
i
– – 400
1000
1000
1000
2)
1000
i
i
1000
1000
5019 501 10096
CONSUMPTION DATA
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
Duration
(hours : minutes)*
Cotton 95 5.0 49** 1.90 2:00
Cotton*** 60 5.0 49 0.95 2:20
Cotton 40 5.0 49 0.60 2:00
Synthetics 60 2.5 50** 0.70 1:30
Synthetics 40 2.5 45 0.55 1:15
Delicates 30 1.5 50 0.50 0:45
Quick wash 30 3.0 40 0.40 0:30
Wool 40 1.0 55 0.60 0:45
Handwash 40 1.0 45 0.60 0:40
Handwash 30 1.0 45 0.50 0:40
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash.
* The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions
applicable at that time.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water
out.
*** Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Add detergents as indicated on the front page and as
described in your Instructions for Use. Close the door
and turn the programme selector to the desired
programme and temperature. The indication lamp next
to the “Start/Pause” button flashes.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the
respective indication lamp lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Intensive rinse” button
• More water is added and rinse cycle is prologned.
• This option is particularly suitable for areas with very
soft water, washing baby linen and helps people
with allergies.
“Spin speed reduction” button (500 rpm)
• Reduces the predetermined automatic maximum
spin speed to treat your laundry more gently.
PROGRAMME START
Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button
lights up. The programme sequence indicator shows the
current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.
When the programme phrase is finised, the
corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp
lights to show the the door can be opened. As long
as a wash programme is running, the door remains
locked and must on no account be forced open.
In case you have an urgent need to open it during a
running programme, refer to “Cancel (Reset) a running
programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused
by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for Use”;
if the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap: if the indications still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean filter”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned: in the
latter case refer to the Instructions for Use (“Removing
the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the
programme. The light flashes.
2. Select the new programme (with temperature), any
options and another spin speed if you want.
3. Press the “Start/Pause” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before the
end.
• Press the “Reset” button for at least 3 seconds.
Any existing water is drained out before the door
can be opened.
5019 501 10096
Loading...