Whirlpool LO50 INSTRUCTION FOR USE

GB LO 50	PROGRAMME TABLE
Cotton	Half Load Option
Synthetic	No Spin Option
Delicate/Wool	Rinse Hold Option
On/Off

	Programme		Type of textiles/Degree of soiling	Max.				Detergent and Additives										Special functions that can be				Tempe-			Pro-
				Load															selected			rature			gramme
																						Selector			selector
						Pre-		Wash			Fabric				Bleach			Half Load	No spin		Rinse
																									knob
					wash						Softener										Hold
				kg																		°C
		Cotton	Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed
1			linen, table linen, underwear, shirts etc). The max. load for heavily soiled laundry is	4.5					Yes													Min. to 95			1
		with prewash
			3.5 kg.
			Averagely soiled, long wearing and temperature stable textiles in cotton and linen
2		Cotton	(bed linen, table linen, underwear, shirts etc). The max. load for heavily soiled	4.5		—			Yes													Min. to 95			2
			laundry is 3.5 kg.
3		Synthetic	Averagely soiled textiles in cotton, linen, polyester (Diolen, Trevira); polyamide	2.0		—			Yes							—						Min. to 60			3
			(Perlon, Nylon), other synthetics or similar blends.
4		Synthetic short	Lightly soiled textiles in cotton, linen, polyester (Diolen, Trevira); polyamide (Perlon,	2.5		—			Yes							—						Min. to 40			4
			Nylon), other synthetics or similar blends.	2.0
5		Delicate	Curtains and delicate synthetic textiles (dresses, skirts and blouses etc).	1.5		—			Yes							—		—				Min. to 40			5
6		Wool	Only machine washable woollens with pure new wool label.	1.0		—			Yes							—		—			No	Min. to 40			6
+		Rinse and	With this programme you can add fabric softener or starch. The programme ends	4.5		—			—							—						Min.			+
		Spin	with a long spin cycle.
		Spin	This programme provides a long spin cycle, the same as the spin cycle in the Cotton	4.5		—			—			—				—		—	—		—	—
			programme.
+		Short Rinse and	With this programme you can add fabric softener or starch. The programme ends	1.5		—			—							—		—				Min.			+
		Short Spin	with a short spin cycle.
		Short Spin	This programme provides a short spin cycle, the same as the spin cycle in the Wool	1.5		—			—			—				—		—	—		—	—
			programme.
		Draining	Drain only, without spin. e.g to unload the laundry earlier.	—		—			—			—				—		—	—		—	—

5019 501 10056

GB

CONSUMPTION DATA

	Programme		Water	Energy	Programme duration
			(l)	(kWh)	(min)
	Cotton 95° C	1	80	2.00	120
	with pre-wash
	Cotton 95° C	2	70	1.80	110
	Cotton 60° C	2	70	1.20	110
	Synthetic 60° C	3	60	0.90	85
	Cotton short 40° C	4	65	0.70	75
	Synthetic 40° C		60	0.60	75
	Delicate 40° C	5	80	0.60	70
	Wool 40° C	6	80	0.60	65

SELECTING THE PROGRAMME

1.Turn the programme selector knob clockwise to the desired programme.

2.Set the temperature knob to the desired temperature.

PRESS THE DESIRED SPECIAL OPTION BUTTON

Lightly soiled/Half load button

•Reduces water consumption, above all during the rinse.

•Especially suitable for lightly soiled or small loads (reduce the detergent quantity).

No spin button

• Press this button to exclude the spin function from the programme.

Rinse hold/Spin delay button

•The laundry remains in the last rinse water without being spun, to avoid heavy creasing.

•Especially suitable for the “Synthetic” or “Delicate” programmes, if the laundry is not to be unloaded immediately after the end of the programme.

Stopping Rinse hold

Press the Rinse hold button again; the load will be spun according to the selected programme.

PROGRAMME START

1.Plug in the appliance.

2.Turn on the water supply tap.

3.Press the “On/Off” button.

DOOR LOCK

The door locks automatically after the programme start until the end of the programme.

PROGRAMME END

• The programme sequence indicator is at “Stop”.

1.Press the “On/Off” button.

2.Cancel the special options by pressing the appropriate buttons.

3.Turn the water supply tap(s) off.

4.Wait for the door to unlock (about 2 minutes).

5.Open the door and unload the machine.

Note: Do not fully close the door but leave it ajar to allow the drum to dry out.

PROGRAMME RESELECTION

1.Press the “On/Off” button.

2.Select the new programme, temperature and relative options.

3.Press the “On/Off” button.

NOTES AND INDICATIONS FOR USE

Water level

It may not be visible as the cycle is optimised for a minimum water consumption without compromising washing results.

Cleaning the pump filter

To ensure an impeccable function of the pump, check the filter regular and clean it if necessary. Close the filter properly to avoid leakage.

Motor smell

Washing machine motor creates a typical electrical smell during first cycles, this is normal and disappears after a few cycles.

5019 501 10056