Whirlpool KSDN5061-A User Manual
Instructions for use
KSDN 5061/A
Bauknecht AG, Industriestrasse 36, 5600 Lenzburg, www.bauknecht.ch
Verkauf Telefon 0848 801 002 Fax 0848 801 017 verkauf@bauknecht.ch
Kundendienst Telefon 0848 801 001 Fax 0848 801 003 service@bauknecht.ch
Ersatzteile Telefon 0848 801 005 Fax 0848 801 004 ersatzteilverkauf@bauknecht.ch
.
Instructions for use
Description of the appliance
Before using the refrigerator
Installation
How to operate the refrigerator/freezer
Freezing
Use of the ice and water dispenser (on
some models)
Use of the dispenser light and dispenser
lock (on some models)
Automatic ice maker
Common ice maker problems
Maintenance and cleaning
Vacation
Troubleshooting guide/after-sales service
Water Filtration and Monitoring System
(on some models)
Disposal of your old refrigerator
Electrical connection
25
Description of the appliance
Freezer Compartment
S. Automatic ice maker
T. Grids
U. Bottom basket
V. Top basket
W. Ice cube bucket
X. Freezer inner door insert
Y. Freezer inner door door
tray
Z. Inside light
26
Refrigerator Compartment
A. Inside light
B. Intermediate light
C. Adjustable shelf
D. Drawer lid
E. Drawer
F. Crisper drawer
G. Crisper drawer
adjustment
H. Meat drawer
I. Meat drawer adjustment
L. Compartment
M. Door tray with bottle
holder
N. 2 litre door tray with
bottle holder
O. 0.75 litre door tray
P. Shelf divider
Q. Egg tray
R. Water filter (on some
models)
Before using the refrigerator
After unpacking, make sure
that the appliance is
undamaged and that the door
closes properly. Any damage
must be reported to your
dealer within 24 hours after
delivery of the appliance.
The packaging box is
recyclable and is marked with
the recycling symbol .
The appliance is manufactured
using recyclable material.
When scrapping, follow the
local disposal regulations for
safeguarding the
environment. To avoid the risk
of children being trapped and
therefore suffocating, do not
allow them to play or hide
inside the refrigerator.
Before scrapping, make the
refrigerator unusable by
removing the doors and
cutting the power cable off.
The appliance must be
delivered to an authorized
collection centre for the
recovery of refrigerant gas.
Make sure that the installation
and the electrical connection
are carried out by a qualified
technician according to the
manufacturers instructions
and local safety regulations.
Declaration of conformity
This appliance is designed to
store food and is manufactured
in conformity with European
directive No. 89/109/EEC.
This appliance is designed,
manufactured, and retailed in
compliance with:
- the safety objectives of the Low
Voltage Directive 73/23/EEC;
- the protection requirements of
the EMC;
- Directive 89/336/EEC amended
by Directive 93/68/EEC.
This appliance is CFC-free (the
refrigerant circuit contains
R134a). For more details, please
refer to the rating plate on the
appliance.
Precautions and general
recommendations
Use the refrigerator
compartment only for storing
fresh food and beverages and
use the freezer compartment
only for storing frozen food,
freezing fresh food and
making ice cubes.
After installation, make sure
that the refrigerator does not
stand on the power cable.
Do not store glass containers
with liquids in the freezer since
they may burst.
Do not eat ice cubes or ice
lollies immediately after
taking them out of the freezer
since they may cause cold
burns.
Before carrying out any
maintenance or cleaning,
always unplug the appliance
or disconnect the power
supply.
Do not store or use gasoline or
other flammable vapours and
liquids in the vicinity of this or
any other appliance. The
fumes can create a fire hazard
or explosion.
Installation
Make sure that your
refrigerator is not near a
heat source.
Install it in a dry and well
ventilated room.
To ensure proper
ventilation leave a 1 cm
space on both sides and
above the refrigerator.
Clean the inside of the
refrigerator before using it.
Let the refrigerator stand
(dont move it) for at least
one hour before
connecting it to the power
supply.
The appliance should be
connected to a water
supply that delivers
drinkable or chemically
purified water.
Install and level the
refrigerator on a floor
strong enough to take its
weight and in an area
suitable for its size and use.
Do not use the refrigerator
in an area where the room
temperature may fall below
13°C.
Be careful not to damage
the floors when you move
the appliance
(e.g. parquet flooring).
27
How to operate the refrigerator/freezer
Connect the appliance to
the water supply and power
supply
(see Installation manual).
When the appliance is
connected to the power
supply, two hyphens will
appear on the freezer
display until the optimal
temperature is reached.
The refrigerator display will
show a temperature of 5°C
(factory set).
When the appliance is
warm, the red alarm LED
will blink and the acoustic
alarm will sound, indicating
that the appliance has not
yet reached the optimal
temperature for storage of
foodstuffs.
Press the Reset button
to stop the acoustic
alarm.
The red LED will stop
blinking when the freezer
compartment reaches at
least
-12°C. At this point it is
possible to store food into
the freezer compartment.
After being switched on,
the refrigerator needs 2/3
hours to reach the correct
temperature to store a
typical volume of food in
the refrigerator
compartment.
IMPORTANT: If food is
placed in the refrigerator
before the appliance has
cooled completely, it may
deteriorate. Turning the
refrigerator and freezer
controls to a cooler than
recommended setting will
not cool the compartments
any faster.
Do not place food near the
air vents in the refrigerator
compartment.
A built-in exterior moisture
control continuously guards
against moisture build-up
on the front edges. Do not
be alarmed if these edges
sometimes feel warm to the
touch.
The inside light switches on
when both doors are
opened.
28
Guide to the refrigerator/freezer and ice/water dispenser control panel
Standby
When button is
pressed, the appliance
switches to standby. This
function deactivates both
the refrigerator and
freezer compartments.
Fast freezing
This function must be
activated before freezing
fresh food. To activate the
function press the specific
button (yellow LED lights
up). The function switches
off automatically after 24
hours or manually by
pressing the button again.
Freezer
compartment
temperature
selection and
control
To change the internal
temperature press buttons
until the desired value is
reached and shown on the
display.
When the standby function is
activated, two green dots will
appear on both of the displays.
To restore the previous setting,
carry out the same procedure
until the previous temperatures
appear on both of the displays.
Freezer compartment
display
Shows the freezer compartment
temperature setting.
T° selection limit:
from - 18°C, least cold
temperature, to - 24°C coldest
temperature.
Refrigerator
compartment display
Shows the refrigerator
compartment temperature
setting. T° selection limit: from +
2°C coldest temperature to + 6°C,
warmest temperature.
When the appliance is on
standby the light inside the
refrigerator compartment is off.
Remember that this operation
does not disconnect the
appliance from the power
supply.
The set T° is stored and will
automatically be restored even
after a power failure or if the
appliance is switched off by
pressing the standby button.
The set T° is stored and will
automatically be restored even
after a power failure or if the
appliance is switched off by
pressing the standby button.
Refrigerator
compartment
temperature
selection and
control
Fast cooling
Switches on the Fast Cooling
function and shows its
operating status. Use this
function to chill the fresh
To change the internal
temperature press buttons
until the desired value is
reached and shown on the
display.
food stored in the refrigerator
compartment rapidly. The
function switches on when the
button (yellow LED) lights up
and switches off automatically
after 6 hours or manually by
pressing the button again.
29
Loading...