Whirlpool KSCX 3625 INSTRUCTION FOR USE

Instructions for use
Important safety instructions 4
Preliminary steps 5
Scrapping 5
Declaration of conformity CE 5
Built-in installation 6
Product description 8
Switching on and preheating 9
Making coffee (using coffee beans) 10
Changing the amount of coffee in the cup 11
Adjusting the coffee grinder 11
Making espresso with pre-ground coffee (instead of beans) 11
Running off hot water 12
Making cappuccino 12
Changing the amount of milk and coffee for cappuccino 13
Changing and setting menu parametrs 13
Cleaning and maintenance 16
Switching off the appliance 18
Displayed messages 19
Troubleshooting 20
Technical data 21
Important safety instructions
4
Your safety and that of others is paramount
Failure to fully comply with the indications given in this user handbook can lead to electric shocks, serious injury, burns, fire, or damage to the appliance. Important warnings are accompanied by the following symbols.
This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others. All safety warnings are preceded by the danger symbol and the following terms:
Indicates a hazardous situation which, if not avoided, will result in serious injury.
Indicates a hazardous situation which, if not avoided, may result in serious injury.
Critical safety warnings
This appliance is designed exclusively for domestic use.
• It is not designed or approved for use in:
- areas appointed as staff kitchens in shops, offices or other working environments
- agritourism establishments
- hotels, motels and other hospitality structures
- rooms for rent
• This is an electrical appliance; you must therefore observe the following safety warnings:
- do not touch the appliance with wet hands;
- do not touch the plug with wet hands;
- make sure that the power socket used is always accessible, so that the appliance can be unplugged whenever necessary;
- in the event of an appliance malfunction, do not attempt to carry out any repairs yourself. Switch the appliance off using the main switch (A23), unplug it from the mains and contact After-sales Service.
• Keep packaging materials (plastic bags, polystyrene) out of reach of children.
• Do not allow the appliance to be used by persons (including children) with any physical, sensory or mental impairment, or with insufficient experience or knowledge of the appliance, unless they are under the supervision of, or instructed in its use by, a person responsible for their safety. Supervise children, making sure they do not play with the appliance.
• Risk of Burns! This machine produces hot water and hot steam may form during operation. Take care to avoid contact with splashes of hot water or hot steam. Use the knobs or handles.
• Do not hold onto or lean on the coffee machine while it is outside the housing unit.Do not place items containing liquids or flammable or corrosive materials on the machine. Use the accessories compartment to store all accessories needed for making coffee (for example, the scoop). Do not place unstable objects on the machine, or large items which might prevent it being moved.
• Do not use the machine while it is removed from the housing unit: always wait for the machine to be switched off before removing it. The only exception to this rule is adjustment of the coffee grinder, which must be carried out with the machine extracted from the housing (see chapter ADJUSTING THE COFFEE GRINDER).
N.B.: only use original spare parts and accessories, or those expressly recommended by the manufacturer.
Prescribed use
This machine is designed and constructed for the preparation of coffee and for heating drinks. Any other use is to be considered improper. This machine is not suitable for commercial use. The manufacturer declines all liability for damage or injury resulting from improper use of the machine. This appliance may be installed above a built-in oven if the latter is equipped with a rear cooling fan (maximum power 3kW).
Instructions for use
Read this user handbook carefully before using the machine.
• Keep this handbook in a safe place.
• Failure to observe the instructions can lead to personal injury or damage to the appliance. The manufacturer declines all liability for injury or damage resulting from failure to observe these user instructions.
N.B.: the machine is equipped with a cooling fan. The fan switches on every time the machine dispenses coffee, steam or hot water. It switches off again automatically after a few minutes.
WARNING:
DANGER:
WARNING:
Preliminary steps
Transport check
After unpacking the appliance, check that it is undamaged and that all the accessories are present and correct. Do not use the appliance is there is any visible damage. Contact the After-sales Service. Installing the appliance
Critical safety warnings
• Installation must be carried out by a qualified technician in accordance with local regulations (see chapter BUILT-IN INSTALLATION).
• Keep the packaging material (plastic bags, polystyrene parts, etc.) out of the reach of children.
• Under no circumstances should the appliance be installed in rooms where the temperature may drop to 0°C.
• Adjust the water hardness setting as soon as possible, following the instructions in chapter BUILT-IN INSTALLATION.
Connecting the appliance
Make sure that the voltage indicated on the rating plate on the underside of the machine corresponds to the domestic power supply voltage.
Connect the machine to a professionally installed power socket having a current rating of at least 10A and an efficient earth connection. If the appliance plug and socket are incompatible, have an electrician replace the socket with one of a suitable type. Observance of safety directives requires that a multi pole switch with a minimum contact gap of 3mm be used for the installation. Do not use multiple plug adapters or extension cords.
The mains power supply must have electrical disconnect devices in compliance with national installation standards.
WARNING:
WARNING:
WARNING:
5
Electrical appliances must not be disposed of as general household waste. Appliances marked with this symbol fall under European Directive 2002/96/CE. Electrical and electronic appliances must
not be disposed of as household waste, but delivered to an authorized collection centre for scrapping. Correct scrapping of the appliance after its working life prevents damage to the environment and potential health hazards. For further information on the scrapping of the appliance, contact your local authority, the waste disposal service or the shop where you purchased the product.
Scrapping
This appliance conforms to the following EC directives:
• Low Voltage Directive 2006/95/EC and subsequent amendments.
• Directive EMC 2004/108/EC and subsequent amendments.
The materials and articles intended to come into contact with foodstuffs conform to the requirements of European regulation (EC) N°1935/2004.
Declaration of conformity CE
Built-in installation
Check the minimum measurements required for correct installation of the appliance. The coffee machine must be installed in a column unit, which must in turn be securely fixed to the wall by means of commercial brackets.
Attention:
• Disconnect the appliance from the mains before carrying out any installation work or servicing.
• Kitchen units in contact with the appliance must be heat resistant (min. 65°C).
• To ensure adequate ventilation, provide an opening on the bottom of the housing (see dimensions in
Figure).
Dimensions in mm
361
528
372
15
45
45
45
45
450 + 2 mm
500
560 + 8
Position the runners on the sides of the housing, as shown in the Figure. Secure the runners with the screws supplied, then pull them out to full extension. If the coffee machine is installed above a "warmer drawer", use the top of the latter as a reference for positioning the runners. In this case, there will be no support surface.
x 16 x 2
6
23
455
398
595
7
Secure the power supply cable with the clip provided. The power supply cable must be long enough to allow the machine to be removed from the housing in order to fill the coffee bean container. Regulations require that the
appliance is earthed. Electrical connection must be carried out by a qualified electrician in accordance with the manufacturer's instructions.
Position the machine on the runners, making sure that the pins engage properly in their seats before securing with the screws provided.
If machine alignment requires adjustment, position the spacers provided either below or at the side of the support.
x 1
x 4
x 4
560
+ 1 mm
8
Appliance
See image A on page 3.
A1 Cup tray
A2 Service door
A3 Coffee feed
A4 Coffee grounds container
A5 Brewing unit
A6 Cup tray lights
A7 On/stand-by button
A8 Control panel
A9 Terminal board
A10 Hot water and steam nozzle
A11 Storage tray
A12 Water tank
A13 Coffee spout (height-adjustable)
A14 Drip tray
A15 Lid of coffee bean container
A16 Coffee bean container
A17 Grinding coarseness adjustment knob
A18 Ground coffee funnel cap
A19 Scoop
A20 Scoop compartment
A21 Ground coffee feed funnel
A22 Power supply cable
A23 Main ON/OFF switch
Control panel
See image B on page
3.
N.B.: the touch-control buttons are activated at the lightest touch of a finger.
B1 Display: guides the user through use of the
machine.
B2 MENU Button to activate or
deactivate the menu setting mode.
B3 Button for selecting the coffee taste.
B4 Button for selecting the type of coffee
desired (espresso, small cup, medium cup, large cup, mug)
B5-B6 Buttons for browsing through the
various menu entries.
B7 Button to confirm the selection
B8 Button to prepare one cup of coffee
B9 Button to prepare two cups of coffee
B10 Button to prepare a cappuccino.
B11 Button to dispense hot water.
Milk and accessories container
See image C on page
3.
C1 Milk frother pointer
C2 Milk container handle
C3 CLEAN button
C4 Milk intake tube
C5 Frothed milk spout
C6 Milk frother
C7 Hot water spout
Product description
Loading...
+ 16 hidden pages