Whirlpool KR365 A2 FRESH WS, KR365 A2 FRESH PT INSTRUCTION FOR USE

1. Lighting

2. Fan with filter (if provided); for the filter, see

the instructions enclosed with it

3. Multi-flow air circulation system

4. Shelves / Shelf zone

5. "Zero Degrees" special compartment

(if available)

6. Rating plate (at the side of crisper)

7. Crisper

8. Control panel

9. Door trays

10. Removable bottle holder (if provided)

11. Bottle holders

Notes: The number of shelves and shape of

accessories may vary, depending on the model.

All the shelves and door trays are removable.

Attention: Do not place the refrigerator
accessories in a dishwasher.

IGB FINDKNSGRPENLFD

PRODUCT SHEET

GB

1

2

2a

2b

3

4

5

6

7

8

9

10

11

FINDKNSGRIPENLFGBD

Refrigerator inside temperature adjustment

The appliance is normally factory-set for operation at the recommended temperature of 5°C.
The inside temperature setting can be adjusted between 3°C and 7°C, proceeding as follows:

• Press the inside temperature adjustment button D. The storage temperature can be changed by 1°C
with each press of the button: the value flashes cyclically between 3°C and 7°C.

Vacation mode

The vacation mode function allows a reduction in electric energy consumption in case of prolonged
absence.
The function is activated by pressing the button I for 3 seconds; the LED E lights up and stays on. The
Vacation function is not compatible with the Fast Cool function. To restore normal functioning of the
refrigerator compartment, repeat the operation. After activating the function, remove perishable food
from the refrigerator compartment and keep the door closed, since the refrigerator maintains an adequate
temperature to prevent the formation of odors

Note: The refrigerator can operate at ambient temperatures between +10°C and +38°C and optimum
performance is obtained at temperatures between +16°C and +38°C.

The ambient air temperature, the frequency of door opening and the position of the appliance
can affect the temperatures inside the refrigerator. Take these factors into consideration when
setting the thermostat knob.

For the complete shutdown of the product, unplug it

A. Green Intelligence. "Green Intelligence"

activation indicator (see enclosed instructions)

B. On/Standby. Press for at least 3 seconds to

put the product in standby mode. Press the
icon once to reactivate the product.

C. Temperature. Set temperature indicator.

D. Temperature. Temperature setting button

E. Vacation mode. Vacation function on indicator.

(see the specific section)

F. Key Lock. Press for at least 3 seconds to

activate/deactivate the Key Lock. When
activated, pressing the other icons activates an
audible signal.

G. Door open. Door open indicator.

H. Stop alarm. Press in case of alarm.

I. Fast Cool/Vacation mode. Press once to

activate the Fast Cool mode. The function
switches off automatically after about 6 hours.
Press for at least 3 seconds to activate the
Vacation Mode.

CONTROL PANEL

ABCDE

FGH I