Whirlpool KOXS 6640 User Manual

Instructions for use

Important safety instructions 4
Installation 8
Safeguarding the environment 9
EC Declaration of conformity 9
Troubleshooting Guide 9
After-Sales Service 10
Cleaning 10
Maintenance 11
Instructions for oven use 12
Functions description table 21
Cooking table 22
Table of Tested Recipes 24
Recommended use and tips 25

4

Important safety instructions

YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT

This manual and the appliance itself provide important safety warnings, to be read
and observed at all times.

This is the danger symbol, pertaining to safety, which alerts users to
potential risks to themselves and others. All safety warnings are preceded
by the danger symbol and the following terms:

Indicates a hazardous situation which,
if not avoided, will cause serious injury.

Indicates a hazardous situation which,
if not avoided, could cause serious injury.

All safety warnings give specific details of the potential
risk present and indicate how to reduce risk of injury,
damage and electric shock resulting from improper use of
the appliance.
Carefully observe the following instructions:

•The appliance must be disconnected from the power
supply before carrying out any installation work.

•Installation and maintenance must be carried out by a
qualified technician, in compliance with the
manufacturer's instructions and local safety regulations.
Do not repair or replace any part of the appliance
unless specifically stated in the user manual.

•Power cable replacement must be carried out by
qualified electician. Contact an authorizes service
centre.

•Regulations require that the appliance is earthed.

•The power cable must be long enough for connecting
the appliance, once fitted in its housing, to the power
supply socket.

•For installation to comply with current safety
regulations, an all-pole disconnect switch with minimum

WARNING

DANGER

5

contact gap of 3 mm must be utilized.

•Do not use multiple plug adapters or extension leads.

•Do not pull the power supply cable in order to unplug
the appliance.

•The electrical components must not be accessible to
the user after installation.

•Do not touch the appliance with any wet part of the
body and do not operate it when barefoot.

•This appliance is designed solely for use as a domestic
appliance for cooking food. No other type of use is
permitted (e.g.: heating rooms). The Manufacturer
declines all responsibility for inappropriate use or
incorrect setting of the controls.

•This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.

•The accessible parts of the appliance may become very
hot during use. Young children should be kept away
from the appliance and supervised to ensure that they
do not play with it.

•The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching
heating elements. Children less than 8 years old shall be
kept away, unless continuosly supervised.

•During and after use, do not touch the heating elements
or interior surfaces of the appliance - risk of burns.

6

Do not allow the appliance to come into contact with
cloths or other flammable materials until all the
components have cooled sufficiently.

•At the end of cooking, exercise caution when opening
the appliance door, letting the hot air or steam exit
gradually before accessing the oven. When the
appliance door is shut, hot air is vented from the
aperture above the control panel. Do not obstruct the
vent apertures.

•Use oven gloves to remove pans and accessories, taking
care not to touch the heating elements.

•Do not place flammable materials in or near the
appliance: a fire may break out if the appliance is
inadvertently switched on.

•Do not heat or cook sealed jars or containers in the
appliance. The pressure that builds up inside might
cause the jar to explode, damaging the appliance.

•Do not use containers made of synthetic materials.

•Overheated oils and fats catch fire easily. Always remain
vigilant when cooking foods rich in fat and oil.

•Never leave the appliance unattended during food
drying.

•If alcoholic beverages are used when cooking foods
(e.g. rum, cognac, wine), remember that alcohol
evaporates at high temperatures. As a result, there is a
risk that vapours released by the alcohol may catch fire
upon coming into contact with the electrical heating
element.

•Never use steam cleaning equipment.

•Do not touch the oven during the pyrolysys cycle. Keep
children away from the oven during the pyrolysis

7

cycle.(only for ovens with Pyrolisis function).

•Only use the temperature probe recommended for this
oven.

•Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of
the glass.

•Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric
shock.

8

After unpacking the oven, make sure that it has not
been damaged during transit and that the oven
door closes properly.
In the event of problems, contact the dealer or
your nearest After-Sales Service. To avoid any
damage, only remove the oven from its
polystyrene foam base at the time of installation.

Preparing the housing unit

• Kitchen units in contact with the oven must be
heat resistant (min 90°C).

• Carry out all cabinet cutting work before fitting
the oven in the housing and carefully remove all
wood chips and sawdust.

• After installation, the bottom of the oven must
no longer be accessible.

• For correct appliance operation, do not
obstruct the minimum gap between the
worktop and the upper edge of the oven.

Electrical connection

Make sure the power voltage specified on the
appliance dataplate is the same as the mains
voltage. The dataplate is on the front edge of the
oven (visible when the door is open).

• Power cable replacement (type H05 RR-F 3 x

1.5 mm

2

) must be carried out by a qualified
electrician. Contact an authorized service
centre.

GENERAL RECOMMENDATIONS

Before use:

• Remove cardboard protection pieces,
protective film and adhesive labels from the
oven and the accessories.

• Remove the accessories from the oven and heat
it at 200°C for about an hour to eliminate the
smell and fumes from the protective grease and
insulating materials.

During use:

• Do not place heavy objects on the door as they
could damage it.

• Do not cling to the door or hang anything from
the handle.

• Do not cover the inside of the oven with
aluminium foil.

• Do not pour water into the inside of a hot oven;
this could damage the enamel coating.

• Do not drag pots or pans across the bottom of
the oven as this could damage the enamel
coating.

• Make sure that the electrical cables of other
appliances do not touch hot parts of the oven
or become trapped in the door.

• Do not expose the oven to atmospheric agents.

Installation

9

Safeguarding the environment

Disposal of packing materials

• The packaging materials are 100% recyclable
and are marked with the recycling symbol .

• The various parts of the packing must therefore
be disposed of responsibly and in full
compliance with local authority regulations
governing waste disposal.

Appliance scrapping

• This appliance is marked according to the
European Directive 2002/96/EC, Waste
Electrical and Electronic Equipment (WEEE).

• By ensuring correct disposal of the product, the
user can help prevent potential negative
consequences for the environment and human
health.

• The symbol on the product or on the
accompanying documentation indicates that it
should not be treated as domestic waste but
must be taken to an appropriate collection
centre for the recycling of electrical and
electronic equipment.

Energy saving

• Only preheat the oven if specified in the
cooking table or your recipe.

• Use dark lacquered or enamelled baking moulds
as they absorb heat far better.

• This oven, which is intended to come into contact with foodstuffs, complies with European Regulation

n.1935/2004 and has been designed, manufactured and sold in conformity with the safety

requirements of the "Low Voltage" directive 2006/95/CE (which replaces 73/23/CEE and subsequent

amendments) and the protection requirements of "EMC" directive "EMC" 2004/108/CE.

EC Declaration of conformity

The oven does not work:

• Check for the presence of mains electrical power and if the oven is connected to the electrical supply.

• Switch the oven off and then on again to see if the fault has been eliminated.

The electronic programmer does not work:

• If the display shows the letter " F " followed by a number, contact your nearest After-Sales Service.
Specify in this case the number after the letter " F ".

Troubleshooting Guide