Whirlpool KHDD 3030 PROGRAM CHART

Instructions for use

GB

Important safety instructions 4

Installation 5

Gas connection 6

Electrical connection 6

Fixing to the support structure - flush-mounting model 7

Adjustment to different types of gas 9

Replacing the injectors (see the injector table in the instructions
booklet for the specific type) 9

Adjusting minimum setting of taps 9

After-Sales Service 10

Troubleshooting guide 10

Care and maintenance 11

Routine cleaning and maintenance 11

EC Declaration of conformity 11

Safeguarding the environment 12

Product description 12

Lighting the burners 12

Practical advice for using the burners 13

Dimensions and distances to be maintained (mm) 13

Injectors table 14

YOUR SAFETY AND THE SAFETY OF
OTHERS ARE VERY IMPORTANT

This manual and the appliance itself provide
important safety messages, to be read and
observed at all times.

This is the safety alert symbol, pertaining to
safety, which alerts users to potential hazards to
themselves and others.
All safety messages will follow the safety alert
symbol and either the terms:

Indicates a hazardous situation which, if not
avoided, will cause serious injury.

Indicates a hazardous situation which, if not
avoided, could cause serious injury.

All Safety messages will tell you what the potential
hazard is, tell you how to reduce the chance of
injury, and tell you what can happen if the
instructions are not followed.

- The appliance must be disconnected from the

power supply before carrying out any installation
work.

- Installation and maintenance must be carried out

by a qualified technician, in compliance with the
manufacturer's instructions and local safety
regulations. Do not repair or replace any part of
the appliance unless specifically stated in the user
manual.

Failure to observe the information given in
this manual may lead to a fire or explosion,
resulting in damage to property or personal
injury.

- Do not store or use petrol or other flammable

vapors and liquids in the vicinity of this appliance.

What to do if you smell gas:

- Do not try to light any appliance.

- Do not touch any electrical switch.

- Do not use any phone in your building.

- Immediately call your gas utility company from a

neighbour's phone. Follow the gas company's
instructions.

- If you cannot reach your gas company, call the
fire service.

- Installation and service must be performed by a
qualified installer, service agency or the gas
supplier.

- Use the appliance in well ventilated rooms only.

The electrical and gas connections must
comply with local regulations.

- When installing the hob, fit a single pole
disconnect switch with a minimum contact gap
of 3 mm which allows complete disconnection of
the appliance.

- Regulations require that the appliance is earthed.

- The power cable must be long enough for
connecting the appliance, once fitted in its
housing, to the power supply

- Use only flexible or rigid metal hose for gas
connection.

- If the power supply cable needs to be replaced,
it must be replaced exclusively with a cable
having identical characteristics to the original
supplied by the manufacturer (type H05V2V2-F
90°C or H05RR-F). This operation must be
performed by a qualified electrician.

- The manufacturer cannot be held responsible for
any injury to persons or animals or damage to
property arising from failure to observe the
above procedures and reminders.

- Do not use multiple plug adapters or extension
cords.

- Do not pull the power supply cord in order to
unplug the appliance.

- The electrical components must not be
accessible to the user after installation.

- Never touch the hob with any wet part of the
body and do not operate it with bare feet.

- This hob (Class 3) is designed solely for
household use for cooking food. Do not use this
appliance as a heater to heat or warm the room.
This usage could lead to carbon monoxide
poisoning, in addition to overheating of the hob.
The Manufacturer declines all responsibility for
inappropriate use or incorrect setting of the
controls.

- The appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or with lack of
experience and knowledge of the appliance,
unless supervised or previously instructed in its
use by those responsible for their safety.

- Young children should be kept away from the
appliance and supervised to ensure that they do
not play with it.

WARNING

WARNING

DANGER

Important safety instructions

4

5

- The use of a gas appliance produces heat and
humidity in the room. Make sure the room is
well-ventilated, or install an extractor hood with
exhaust duct.

- In case of prolonged use, additional ventilation
may be necessary (by opening a window or
increasing the hood extraction speed).

- After use, make sure the knobs are in off
position and close the main gas supply cock or
the gas cylinder valve.

- Overheated oils and fats catch fire easily. Always
remain present and vigilant when preparing food
with a high oil, fat or alcohol content (e.g. rum,
cognac, wine).

- Keep the packaging materials out of the reach of
children.

- Before cleaning or maintenance wait for the hob
to cool down.

KEEP THESE INSTRUCTIONS

Important safety instructions

After unpacking the appliance, check that it has not
been damaged in transit. In the event of problems,
contact the dealer or your nearest After-sales
Service.

TECHNICAL INFORMATION FOR THE
INSTALLER

• This product can be embedded in a
worktop 20 to 60 mm thick.

• If there is no oven beneath the hob, insert
a separator panel which is at least equal in
size to the opening made in the worktop.
This panel must be positioned at a
maximum distance of 150 mm below the
upper surface of the work surface but, in
no case less than 20 mm from the bottom
of the hob. If there is an oven beneath the
hob, make sure that it is manufactured by
Kitchen Aid and equipped with a cooling
system. The manufacturer declines all
liability if another brand oven is installed
beneath the hob.

• Before installation, make sure that:

- the local gas delivery conditions (nature
and pressure) are compatible with the
settings of the hob (see the rating plate
and injector table);

- the outer surfaces of the furniture or
appliances adjacent to the hob are heat resistant
according to local regulations;

- combustion products are discharged outdoors
through specific hoods or wall and/or window
mounted electrical fans.

Installation