INTGH02X GB |
PRODUCT DESCRIPTION SHEET |
Operation of burners with safety device and electric ignition
To light one of the burners:
•Press the relative knob and turn it anticlockwise to the large flame setting 
.
•At the same time, press the button with the
star 
.
The spark plug gives out a spark that causes the burner to ignite.
•Once the burner is lit, keep the knob pressed for about 10 seconds.
•Release the knob.
If the burner does not ignite, repeat the operation.
1.Removable panstand grids
2-3. Medium burners
4.Large burner
5.Small burner
6. Medium burner control knob
7. Medium burner control knob
8. Large burner control knob
9. Small burner control knob
10. Electric ignition button
Symbols
Shaded circle |
Tap closed |
Large flame
Maximum opening/ delivery
Small flame
Minimum opening or reduced delivery
Note:
-Should particular local conditions of the delivered gas make the ignition of the burner difficult, it is advisable to repeat the operation
with the knob turned to the small flame setting 
.
-The burner safety system serves to prevent the emission of gas if the flame should be extinguished accidentally (draughts, interruptions in gas supply, dousing with liquids, etc.).
5019 619 01165
Loading...