Whirlpool HDW 6100/P INSTRUCTION FOR USE

30105817GB.fm Page 1 Friday, December 2, 2005 4:22 PM

GB HDW 6100/P PROGRAMME CHART

This washing machine is equipped with

automatic safety functions

at an early stage and react appropriately, e.g.:

A. “Water Tap closed” indicator

Check your washing machine's water supply.

B. “Aquastop” indicator

Can be released by excess foaming or a leak in the appliance (see also instructions for use “Troubleshooting”).

which detect faults

C. “Door Locked” indicator D. “Start/Pause” button

{

E. “Start Delay” button F. Programme sequence indicator

G. Temperature selection buttons H. “Eco” button I. Operation indicators

Programme

Cotton

Synthetics

Daily Load

Delicates

Woo l

Quick Wash

Handwash

Rinse & Spin

Intensive Spin

Gentle Spin

Drain / Cancel



For improved garment care spin speed is restricted to 1000 rpm in this programme.



For improved garment care spin speed is restricted to 400 rpm in this programme.

Care

Labels

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Normally soiled blouses, shirts and other outer clothing made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of these fibres with cotton.

Slightly to normally soiled textiles made of cotton and/or synthetic fibres.

Curtains and delicate dresses, skirts, shirts and blouses.

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

Hardly worn outer and sport clothing made of cotton, polyester, polyamid and mixed cotton fabrics.

Textiles made of linen, silk, wool or viscose marked as “handwashable”.

––

––––––

Type of wash/

Degree of soiling

Max.

Detergent and Additives Selectable special options =

load

Softe-

ner

Kg °C rpm

6.0

2.5

3.0

1.5

1.0

3.0

1.0

6.0

1.5

Main wash

❉

❉ ❉

❉

Ye s

❉

Pre-

wash

Start

Delay

❉❉❉ ❉ ❉ ❉❉

❉❉❉ ❉ ❉❉

–

❉❉❉

–

––

–––

Pre-

Intensive

wash

❉

Rinse

–

❉❉❉

–

❉

––

–

❉❉❉

–– –

–– –––––

Rinse

hold

❉❉

❉

Var ia bl e

spin

❉

Te m p e -

rature

Eco

20 to 95 1400

20 to 60 1000

❉

30 to 60 1400

–

20 to 40 1000

–

20 to 40 1000

–

20 to 60 1400

–

20 to 30 400

–

20 1400

––

Max.

spin

speed

1400

1000

Notes

“Prewash” can be additionally selected for heavily soiled laundry at any temperature.

“Prewash” can be additionally selected

for heavily soiled laundry.

In this programme the spin speed should be adapted to the fabrics.

If you select “Rinse Hold” do not leave

items to soak for too long.

If you select “Rinse Hold” do not leave

items to soak for too long. A very gentle spin is used in this programme.

Same as the spin cycle in the “Cotton” programme.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

A very gentle spin is used in this

programme. Same as the spin cycle in the “Wool” programme.

This programme only drains (alternative method of terminating the programme after “Rinse Hold” without spinning). In addition all running programmes can be cancelled with this programme.

Whirlpool is a registered trademark of Whirlpool USA

–

5019 301 05817

Black process 45.0° 100.0 LPI

30105817GB.fm Page 2 Friday, December 2, 2005 4:22 PM

CONSUMPTION DATA*

Programme Te m p e r a t u r e

(°C) Cotton Cotton Cotton

Synthetics Synthetics

Daily Mixed

Delicate

Woo l

Rapid wash

Handwash

Consumption values

** The

programme duration

conditions and to adapt the programme run time accordingly.

*** To reduce

water out.

the water temperature

were measured in normalized conditions in compliance with Standard IEC/EN 60456.

95 6.0 49*** 1.90 1:55 60 6.0 44 1.14 2:20 40 5.0 42 0.70 2:00 60 2.5 55 0.70 1:30 40 2.5 50 0.50 1:15 40 3.0 48 0.55 1:00 30 1.5 60 0.50 0:45 40 1.0 60 0.50 0:40 30 3.0 37 0.40 0:30 30 1.0 45 0.40 0:35

may also vary from the chart values. The washing machine is able to allow for particular household

, some cold water is added at the end of the main wash cycle, before the pump drains the

Wash

(kg)

POUR IN DETERGENT, CLOSE THE DOOR AND SELECT A PROGRAMME

Add the detergent as described in the chapter “Detergent and Additives” in the booklet.

1. Turn the

programme selector knob

in any direction to the desired programme. The remaining time display shows the duration of the chosen programme (in hours and minutes) and the pilot lamp above the

button is flashing.

Pause”

“Start/

2. The programme sequence indicator and the indicator with the maximum possible spin speed light up.

3. The temperature can be altered by pressing the

“+”

button under the corresponding LED

“-”

display.

SELECT SPECIAL OPTIONS The indicator lights go on.

“Prewash” button

• Only for heavily soiled laundry (for example sand or granular dirt). Programme duration is increased by some 15 min.

“Intensive Rinse” button

• An additional rinse cycle is carried out.

• This additional option is particularly suitable for areas with very soft water, for washing baby linen and helping people with detergent allergies.

Water

(l)

Energy

(kWh)

Programme duration **

approx.

(hours : minutes)

“Rinse Hold” button

• The laundry remains in the last rinse water without being spun: discoloration of the laundry and additional creasing are prevented.

• This additional option is particularly recommended for the programme “Synthetics” or “Delicate”.

• This additional function is particularly useful if you want to postpone spinning to a later time.

The programme has reached the “Rinse

Note:

Hold” when the “Rinse Hold” button light flashes.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme will terminate automatically with the appropriate spin cycle for the current programme.

• If you do not wish to spin the clothes, turn the programme selector knob to “Drain/Cancel” and press the

“Start/Pause”

button again.

“Variable Spin” button

• Every programme has an automatic predefined maximum spin speed.

• Press the button to set another spin speed.

• If the spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

“Eco” button

• The duration of the wash is extended and the temperature reduced to save up to 40% of energy but maintaining good washing results.

START DELAY

The “Start Delay” allows to run the machine at the consumer's convenience, for example at night when electricity is cheaper.

• Press the “Start Delay” button. Select the programme start from 1 to 19 hours ahead by pressing the button again.

•Press the

“Start/Pause”

button. The Start Delay

indicator light flashes until the programme starts.

• During programme start the remaining time appears in the digital display.

“Start Delay” correction.

• Before the “Start Delay” has been started: The preset number of hours can be altered by continuously pressing the “Start Delay” button. The number of hours can be reduced by first turning the programme selector switch to the “Off” position. Then set the programme again and select the desired number of hours.

• After the “Start Delay” has been started: The preset number of hours can be reduced by pressing the “Start Delay” button again. To increase the number of hours preselected, first turn the programme selector switch to the “Off” position. Then set the programme and the additional options again and select the desired number of hours.

PROGRAMME START

After you have selected the programme and the additional option, the indicator light over the

“Start/Pause”

button flashes. Turn on the tap and

start the programme by pressing the

“Start/Pause”

button. Now the indicator light

above the button goes on. In addition, all programme phases are indicated by

the associated lights. After the end of a programme phase the associated indicator light goes out. Thus the programme sequence indicator moves from left to right across the wash, rinse and spin phases. At the end of the programme only the “End” indicator is still on.

DOOR LOCKED

In the first 15 minutes after the start of the “Cotton coloured” and “Synthetic” programmes the door can be opened to add further laundry. This is not possible if “Rapid Wash” is selected.

PROGRAMME END

• The remaining time display shows “0:00” and the “End” indicator lights up.

1. Turn the programme selector knob to the “Off” position.

2. Turn off the tap.

3. Open the door and unload the machine.

RESELECT AFTER PROGRAMME START

A newly-selected programme will continue in the same programme section during which the current programme was interrupted. Therefore do not add any more detergent.

1. Press the

“Start/Pause”

button to interrupt the

programme. The indicator light flashes.

2. Select the new programme (with temperature), any additional options and - if you wish - another spin speed.

3. Press the

“Start/Pause”

button again to restart

the programme.

•If you are in the “Prewash” programme step this additional option can not be deselected as described (to do this see “Cancel/Delete Programme).

CANCEL/DELETE PROGRAMME

1. Press the

“Start/Pause”

button to interrupt the

programme. The indicator light flashes.

2. Set the programme selector to “Drain/Cancel”. The spin speed

and the remaining time “2

“0”

minutes” are displayed.

3. Press the

“Start/Pause”

button to start the

“Drain/Cancel” programme.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 05817

Black process 45.0° 100.0 LPI

+ 1 hidden pages