Whirlpool HDW 6000/WH INSTRUCTION FOR USE

30105701GB.fm Page 1 Wednesday, July 6, 2005 2:41 PM
GB HDW 6000 PROGRAMME CHART
This washing machine is equipped with
automatic safety functions
faults at an early stage and react appropriately , e.g.:
A. “Water Tap closed” indicator
Check your washing machine's water supply.
B. “Aquastop” indicator
Can be released by excess foaming or a leak in the appliance (see also instructions for use “Troubleshooting”).
Programme
Cotton
Synthetics
Daily Load
Delicates
Wool
Care
Labels
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Normally soiled blouses, shirts and other outer clothing made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of these fibres with cotton.
Slightly to normally soiled textiles made of cotton and/or synthetic fibres.
Curtains and delicate dresses, skirts, shirts and blouses.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
Type of wash/
Degree of soiling
A
B
C
D
Max.
Detergent and Additives Selectable special options = Tem pe -
load
Softe-
ner
Kg °C rpm
6.0
2.5
3.0
1.5
1.0
Main wash
❉ ❉
E
Pre-
wash
Yes
Yes
Yes
Yes
Yes
F
Pre-
Intensive
wash
Rinse
❉❉ ❉ ❉ ❉❉
❉❉ ❉ ❉❉
––
❉❉
–– –
H
{
G
Rinse
❉❉❉
Variable
hold
❉❉
❉❉
spin
1)
1)
1)
Eco
– –
C.“Door Locked” indicator D.“Start/Pause” button E. Programme sequence indicator
F. Temperature selection buttons G.“Eco” button H.Operation indicators
rature
20 t o 9 5 1200
20 t o 6 0 1000
30 t o 6 0 1200
20 t o 4 0 1000
20 t o 4 0 1000
Max.
spin
speed
Notes
“Prewash” can be additionally selected for heavily soiled laundry at any temperature.
“Prewash” can be additionally selected for
1)
heavily soiled laundry.
In this programme the spin speed should be adapted to the fabrics.
1)
If you select “Rinse Hold” do not leave
1)
items to soak for too long.
Hardly worn outer and sport clothing made
Quick Wash
Handwash
Rinse & Spin
Intensive Spin
Gentle Spin
Drain / Reset
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
Black process 45.0° 100.0 LPI
of cotton, polyester, polyamid and mixed cotton fabrics.
Textiles made of linen, silk, wool or viscose marked as “handwashable”.
–– ––
––
–––––––––––
3.0
1.0
6.0
6.0
1.5
Yes
Yes
–– –
–– –
–––
❉❉
❉❉
❉❉❉
––––– –
––––– –
20 t o 6 0 1200
If you select “Rinse Hold” do not leave
2)
1)
20 t o 3 0 400
– –
20 1200
––
––
2)
items to soak for too long. A very gentle spin is used in this programme.
Same as the spin cycle in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton”
1200
programme. A very gentle spin is used in this
1)
programme. Same as the spin cycle in the
1000
“Wool” programme. This programme only drains (alternative
method of terminating the programme after “Rinse Hold” without spinning). In addition all running programmes can be cancelled with this programme.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 05701
30105701GB.fm Page 2 Wednesday, July 6, 2005 2:41 PM
CONSUMPTION DATA*
Programme Temperature
(°C) Cotton Cotton Cotton
Synthetics Synthetics
Daily Mixed
Delicate
Wool
Rapid wash
Handwash
*
Consumption values
** The
programme duration
conditions and to adapt the programme run time accordingly.
*** To reduce
water out.
the water temperature
were measured in normalized conditions in compliance with Standard IEC/EN 60456.
95 6.0 49*** 1.90 1:55 60 6.0 44 1.14 2:20 40 5.0 42 0.70 2:00 60 2.5 55 0.70 1:30 40 2.5 50 0.50 1:15 40 3.0 48 0.55 1:00 30 1.5 60 0.50 0:45 40 1.0 60 0.50 0:40 30 3.0 37 0.40 0:30 30 1.0 45 0.40 0:35
may also vary from the chart values. The washing machine is able to allow for particular household
, some cold water is added at the end of the main wash cycle, before the pump drains the
Wash
(kg)
POUR IN DETERGENT, CLOSE THE DOOR AND SELECT A PROGRAMME
Add the detergent as described in the chapter “Detergent and Additives” in the booklet.
1. Turn the programme selector knob in any direction to the desired programme. The pilot lamp above the “Start/Pause” button is flashing.
2. The programme sequence indicator and the indicator with the maximum possible spin speed light up.
3. The temperature can be altered by pressing the “+” or “-” button under the corresponding LED display.
Water
(l)
Energy
(kWh)
Programme duration **
approx.
(hours : minutes)
SELECT SPECIAL OPTIONS ­The indicator lights go on.
“Prewash” button
• Only for heavily soiled laundry (for example sand or granular dirt). Programme duration is increased by some 15 min.
“Intensive Rinse” button
• An additional rinse cycle is carried out.
• This additional option is particularly suitable for areas with very soft water, for washing baby linen and helping people with detergent allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water without being spun: discoloration of the laundry and additional creasing are prevented.
• This additional option is particularly recommended for the programme “Synthetics” or “Delicate”.
• This additional function is particularly useful if you want to postpone spinning to a later time.
Note: The programme has reached the “Rinse Hold” when the “Rinse Hold” button light flashes.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the programme will terminate automatically with the appropriate spin cycle for the current programme.
• If you do not wish to spin the clothes, turn the programme selector knob to “Drain/Cancel” and press the “Start/Pause” button again.
“Variable Spin” button
• Every programme has an automatic predefined maximum spin speed.
• Press the button to set another spin speed.
• If the spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.
“Eco” button
• The duration of the wash is extended and the temperature reduced to save up to 40% of energy but maintaining good washing results.
PROGRAMME START
After you have selected the programme and the additional option, the indicator light over the “Start/Pause” button flashes. Turn on the tap and start the programme by pressing the “Start/Pause” button. Now the indicator light above the button goes on.
In addition, all programme phases are indicated by the associated lights. After the end of a programme phase the associated indicator light goes out. Thus the programme sequence indicator moves from left to right across the wash, rinse and spin phases. At the end of the programme only the “End” indicator is still on.
DOOR LOCKED
In the first 15 minutes after the start of the “Cotton coloured” and “Synthetic” programmes the door can be opened to add further laundry. This is not possible if “Rapid Wash” is selected.
PROGRAMME END
• All the lights of the programme sequence indication are off.
1. Turn the programme selector knob to the “Off” position.
2. Turn off the tap.
3. Open the door and unload the machine.
RESELECT AFTER PROGRAMME START
A newly-selected programme will continue in the same programme section during which the current programme was interrupted. Therefore do not add any more detergent.
1. Press the “Start/Pause” button to interrupt the programme. The indicator light flashes.
2. Select the new programme (with temperature), any additional options and - if you wish - another spin speed.
3. Press the “Start/Pause” button again to restart the programme.
• If you are in the “Prewash” programme step this additional option can not be deselected as described (to do this see “Cancel/Delete Programme).
CANCEL/DELETE PROGRAMME
1. Press the “Start/Pause” button to interrupt the programme. The indicator light flashes.
2. Set the programme selector to “Drain/Cancel”. The spin speed “0” is displayed.
3. Press the “Start/Pause” button to start the “Drain/Cancel” programme.
Black process 45.0° 100.0 LPI
Whirlpool is a registered trademark of Whirlpool USA
5019 301 05701
Loading...
+ 1 hidden pages