Whirlpool HDW 6000/D INSTRUCTION FOR USE

40105433GB.fm Page 1 Thursday, September 27, 2007 6:31 PM

GB PROGRAMME CHART

A. Programme selector B. Display

C. “Temperature” button D. “Variable spin” button

E. “Start delay” button F. “Start” button G. “Cancel/Reset” button H. “Favourites” button

Programme

White Cotton /

Hygiene+

Colours Colorati

Synthetics Sintetici

Cotone

Te m p e -

rature

- 95 °C

60 °C

- 40 °C

- 60 °C

Care

Labels

Max

Load

- Respect the manufacturer’s recommendations on the care

label

Normally to heavily soiled bed linen, table linen and underwear,

6.0

towels, shirts etc. made of cotton and linen. At a temperature of 95°C, this programme eliminates bacteria,

6.0

ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

5.0

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with

2.5

cotton.

F C E D

Type of wash/Notes

I. Programme sequence indication

J. “Door open” indication

Your washing machine is equipped with automatic safety functions which detect

and diagnose faults at an early stage and react appropriately, e.g.:

K. “Water tap closed” indication

Detergents and additives Special options Start

Pre-

wash

❉

Main

Softe-

wash

Ye s

Pre-

ner

wash

Pre-

lavaggio

❉❉❉ ❉ ❉❉ ❉ ❉

L. “Clean pump” indication M. “Service” indication

Rinse

hold

Antipiega

Intensive

rinse

Risciacquo

intensivo

Easy

ironing

Stiro facile

Eco

delay

Avvio

ritardato

Varia ble

spin

Centri-

fuga

Spin

Max Spin

Speed

rpm

max.

1000

Daily load Misti

Quick wash Rapido

Delicates Delicati

Woo l Lana

Handwash Lavaggio a mano

Rinse & Spin

Risciacquo &

Centrifuga

Spin Centrifuga

Gentle Spin Centrifuga breve

Drain Scarico

❉

: optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Do not use liquid detergent when activating the “Start Delay”.

Do not use liquid detergent for the main wash when activating the “Prewash” option.

Black process 45.0° 100.0 LPI

- 60 °C

- 30 °C

- 40 °C

——

———

Slightly to normally soiled textiles made of cotton and/or

3.0

synthetics.

Shortly worn outer clothing made of cotton, polyester,

3.0

polyamide and blends with cotton. Curtains and delicate clothing, dresses skirts, shirts and

1.5

blouses.

Only woollens, labelled with the Woolmark and identified as

1.0

machine washable.

Textiles made of silk, linen, wool and viscose marked as

1.0

“handwashable”.

Same as the last rinse and the final spin in the “Cotton”

6.0

programme.

In this programme spinning is intensive. Same as the spin cycle in

6.0

the “Cotton” programme. In this programme spinning is gentle. Same as the spin cycle in the

1.0

“Wool” programme. Drain only - no spinning. Alternative method of terminating

programme after “Rinse Hold”.

Ye s

—

Ye s

—

Ye s

❉

Ye s

—

Ye s

—

——

❉

❉ ❉❉❉

❉

❉ ❉

❉❉❉

—

❉

—

❉

—

❉

—

❉❉

—

———

——

————— — ——

❉❉

❉❉ ❉❉

❉❉

❉❉ ❉❉ ❉❉

❉❉

max

max.

1000

400

max.

1000

————— — —— — — —

5019 401 05433

40105433GB.fm Page 2 Thursday, September 27, 2007 6:31 PM

CONSUMPTION DATA

Programme

White Cotton / Hygiene+ 95 6.0 59

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* **

Cotton 60 6.0 56 1.14 2:10

Cotton with “Eco”

Cotton 40 5.0 53 0.65 2:00 Synthetics 60 2.5 50 Synthetics 40 2.5 46 0.40 1:20 Daily load 40 3.0 41 0.50 1:00

Quick wash 30 3.0 41 0.30 0:30

Delicates 30 1.5 60 0.50 0:45

Wool 40 1.0 60 0.50 0:45

Handwash 40 1.0 45 0.50 0:40

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. Reference Programme for Energy Label.

Temperature

(°C)

60 6.0 51 1.02 2:30

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. Turn the programme selector to the desired programme.

temperature

The display can be altered by pressing the “Temperature” button or the “Variable spin” button.

and

spin speed

indicated on the

SELECT ANY DESIRED OPTION

If the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the Prewash option.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rinse hold”, do not leave the laundry to soak for too long.

Note:

The programme stops to “Rinse hold” at the

time the “Rinse hold” symbol on the display lights up.

Load

Water

(kg)

Terminate the “Rinse hold” option:

• Press the

• If you do not want to spin the laundry, turn the

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and

• Increases the water quantity and the clothes are spun

“Eco” button

• With a modified temperature profile and a slightly

Energy

(l)

(kWh)

The light over the

“Start”

terminate automatically with the final spin cycle for the present wash programme.

programme selector to the “Drain” programme and start by pushing the

cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

soft water or for washing baby linen, and helps people with allergies.

“Daily load” programmes to make ironing easier.

very gently.

prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.

Approx. Programme Duration

(hours : minutes)

1.90 2:00

0.80 1:35

“Start”

button flashes.

button; the programme will

“Start”

button.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed and option(s), push and hold the button for at least 3 seconds. The lamp next to

“Favourites”

programme setting is saved.

Next time you want to use your individual programme setting, select the programme, push the button and start by pushing

If you want to replace the saved programme setting by another one:

• Select programme, temperature, spin speed and options as desired, then press and hold the for at least 3 seconds. The previously saved programme setting will be replaced by the new one.

shortly flashes and then lights up - the

“Start”

“Favourites”

button

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

• Select programme, temperature, spin speed and options.

• Press the “Start Delay” button to select a delay time of 1, 3, 6, 9 or 12 hours.

• Press the The countdown of the delay time begins; the clock symbol on the display and the delay time selected flash.

• As soon as the programme starts, the lights on clock symbol and delay time go off.

• The number of hours preselected can be reduced by pressing again the “Start Delay” button.

To cancel the “Start Delay”

• Select another programme or press the

Reset”

“Start”

button.

“Cancel/

PROGRAMME START

Open the tap and press the

“Start”

the indicator shows the current programme phase, running from top to bottom through Wash, Rinse, Spin/Drain.

button goes on. The programme sequence

“Start”

button. The light over

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain ho se i s k ink ed o r th e f ilt er m ust b e cl ea ned ; in the l att er ca se refer to the Instructions for Use (“Removing the Filter”).

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

PROGRAMME END

• The light of the programme sequence indicator is off, and the “Door open” indication lights up.

1. Turn the programme selector to the

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

“Off/O”

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the The light flashes.

2. Select the new programme, temperature, any options and another spin speed if you want.

3. Press the continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

“Start”

button to pause the programme.

“Start”

button again. The new programme

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

“Cancel/Reset”

The the end.

• Press the seconds. Any existing water is drained out before the door can be opened.

button cancels a programme before

“Cancel/Reset”

button for at least 3

5019 401 05433

position.

Black process 45.0° 100.0 LPI