Whirlpool HD SE10 90S INSTRUCTION FOR USE

SVÄVANDE

GB

ENGLISH 4

ENGLISH 4

Contents

Safety information 4
Product description 7
Control panel 7
Cleaning and maintenance 8
What to do if ... 10

Technical data 11
Environmental concerns 12
Electrical connection for
Great Britain and Ireland only 13
IKEA GUARANTEE 14

Safety Information

Before fi rst use

Your safety and that of others is paramount.
Remove cardboard protection pieces,
protective fi lm and adhesive labels from
accessories.
Check the appliance for any transport
damage.
To avoid any damage do not place any
weights on the appliance. Do not expose
the appliance to atmospheric agents.
This manual and the appliance itself provide
important safety warnings, to be read and
observed at all times.

This is the attention symbol, pertaining

to safety, which alerts users to potential
risks to themselves and others.
All safety warnings are preceded by the
attention symbol and the following terms:

DANGER: indicates a hazardous

situation which, if not avoided, will
cause serious injury.

WARNING: Indicates a hazardous

situation which, if not avoided, could
cause serious injury.
All safety warnings give specifi c details
of the potential danger/warning present
and indicate how to reduce risk of injury,
damage and electric shock resulting from
improper use of the appliance. Carefully
observe the following instructions.

Precautions and general
recommendations

• The electrical installation and the

electrical connection must be carried
out by a qualifi ed technician according
to the manufacturer’s instructions and

in compliance with the local safety
regulations. Do not repair or replace any
part of the appliance unless specifi cally
stated in the user manual.

• The appliance must be disconnected
from the power supply before carrying
out any installation work.

• Earthing of the appliance is compulsory.
(required only for class I).

• The power cable must be long enough
for connecting the appliance, once
fi tted in its housing, to the power supply
socket.

• Do not pull the power supply cable in
order to unplug the appliance.

• The electrical components must not be
accessible to the user after installation.

• Do not touch the appliance with any wet
part of the body and do not operate it
when barefoot.

• The appliance is not intended for use
by persons (including children) with any
physical, sensory or mental impairment,
or without experience and knowledge
of the appliance, unless supervised or
previously instructed in its use by those
responsible for their safety.

• Do not repair or replace any part of the
appliance unless specifi cally indicated
in the manual. All other maintenance
services must be carried out by a
specialised technician.

• Children must be supervised to ensure
they do not play with the appliance.

• When drilling through the wall pay
attention not to damage electric

ENGLISH 5

connections and/or pipes.

• Air vents must always discharge to the
outside.

• The manufacturer rejects all
responsibilities for any damage caused
by improper use or wrong settings.

• Appropriate maintenance and cleaning
ensure the good working order and
the best performance of the appliance.
Regularly clean all stubborn surface dirt
to avoid grease build up. Remove and
clean or change the fi lter regularly.

• Never fl ame cook food (fl ambé) under
the appliance. Using free fl ames might
cause fi re.

• Failure to observe the instructions for
cleaning the hood and replacing the
fi lters may result in a fi re.

• Exhaust air must not be vented through
a fl ue used for removal of fumes
produced by gas combustion appliances
or other combustible materials, but must
have a separate outlet. All national
regulations governing extraction of
fumes must be observed.

• There shall be adequate ventilation if
the hood is being used at the same time
as other appliances using gas or other
combustible materials. The negative
pressure of the room must not exceed 4
Pa (4x 10-5 bars). For this reason ensure
that the room is well ventilated.

• Do not leave frying pans unattended
when frying, as the frying oil may catch
fi re.

• Before touching the light bulbs, ensure
that they are cold.

• Do not use or leave the hood without
the light bulb correctly fi tted, as this may
cause electric shock.

• The hood is not a work surface, therefore
do not place any objects on top of it or
overload it.

• During all installation and maintenance
operations wear appropriate working
gloves.

• This appliance is not suitable for outdoor
use.

WARNING: when the hob is in use,
accessible parts of the hood may

become hot.

Installation and connection

After unpacking the appliance, check for
any transport damage. In the event of
problems, contact the After-sales Service.
To prevent any damage, only remove
the appliance from its polystyrene foam
packaging at the time of installation.

Preparing for installation

WARNING: this is a heavy product; the

hood should only be lifted and
installed by two or more people.
The minimum distance between the hob and
the bottom part of the hood must not be less
than 65 cm for burning gas or other fuels
and 50cm for electric cookers.
Before installation also check the minimum
distances stated in the manual of the cooker.
If the installation instructions for the cooker
specify a greater distance between cooker
and hood, this distance must be observed.

Electrical connection

Make sure the power voltage specifi ed on
the appliance rating plate is the same as
the mains voltage.
This information can be found on the inside
of the hood, under the grease fi lter. Power
cable replacement (type H05 VV-F) must
be carried out by a qualifi ed electrician.
Contact an authorized service centre.
If the hood is fi tted with an electric plug,
connect the plug to a socket complying with
current regulations, located in an accessible
place.
If no plug is fi tted (direct wiring to the
mains), or if the socket is not located in an
accessible place, a qualifi ed electrician
should install a standardised double pole
power switch that will enable complete
isolation from the mains in case of category

ENGLISH 6

III overvoltage conditions, in accordance
with wiring rules.

Use

The hood has been designed to be installed
and used either as a “Exhausted model”, or
as a “Recirculation model”.

Exhausted model (see symbol
installation booklet)

Cooking steam is sucked and channelled
outside the house through a discharge duct
(not supplied), fi tted to the hood steam
outlet.
Ensure that the discharge duct is correctly
fi tted to the air outlet, unit using an
appropriate connection system.

Important: If already installed, remove the
charcoal fi lter/s.

in

Recirculation model (see symbol
installation booklet)

The air is fi ltered through one or more the
charcoal fi lters, and then resent into room.
Important: Ensure appropriate air
circulation around the hood.
Important: If the hood is supplied without
charcoal fi lters, these must be fi tted before
the hood can be used. Filters are available
in shops.
The hood should be installed away from
particularly dirty areas, windows, doors and
heat sources.
The accessories for wall fi xing are not
included because walls made of different
materials require different types of fi xing
accessories. Use fi xing systems suitable for
the walls of your home and the weight of
the appliance. For more details, contact a
specialized dealer.

Keep this booklet for future consultation.

in