Whirlpool HD LN10 60S INSTRUCTION FOR USE

LAGAN
GB
ENGLISH 4
ENGLISH 4
Contents
Safety information 4 Product description 7 Control panel 7 Cleaning and maintenance 7 What to do if ... 9
Technical data 10 Environmental concerns 11 Electrical connection for Great Britain and Ireland only 12 IKEA GUARANTEE 13
Safety Information
Before fi rst use
This is the attention symbol, pertaining
to safety, which alerts users to potential risks to themselves and others. All safety warnings are preceded by the attention symbol and the following terms:
DANGER: indicates a hazardous
situation which, if not avoided, will cause serious injury.
WARNING: Indicates a hazardous
situation which, if not avoided, could cause serious injury. All safety warnings give specifi c details of the potential danger/warning present and indicate how to reduce risk of injury, damage and electric shock resulting from improper use of the appliance. Carefully observe the following instructions.
Precautions and general recommendations
• The electrical installation and the
electrical connection must be carried out by a qualifi ed technician according to the manufacturer’s instructions and
in compliance with the local safety regulations. Do not repair or replace any part of the appliance unless specifi cally stated in the user manual.
• The appliance must be disconnected from the power supply before carrying out any installation work.
• Earthing of the appliance is compulsory. (required only for class I).
• The power cable must be long enough for connecting the appliance, once tted in its housing, to the power supply socket.
• Do not pull the power supply cable in order to unplug the appliance.
• The electrical components must not be accessible to the user after installation.
• Do not touch the appliance with any wet part of the body and do not operate it when barefoot.
• The appliance is not intended for use by persons (including children) with any physical, sensory or mental impairment, or without experience and knowledge of the appliance, unless supervised or previously instructed in its use by those responsible for their safety.
• Do not repair or replace any part of the appliance unless specifi cally indicated in the manual. All other maintenance services must be carried out by a specialised technician.
• Children must be supervised to ensure they do not play with the appliance.
• When drilling through the wall pay attention not to damage electric connections and/or pipes.
ENGLISH 5
• Air vents must always discharge to the outside.
• The manufacturer rejects all responsibilities for any damage caused by improper use or wrong settings.
• Appropriate maintenance and cleaning ensure the good working order and the best performance of the appliance. Regularly clean all stubborn surface dirt to avoid grease build up. Remove and clean or change the fi lter regularly.
• Never fl ame cook food (fl ambé) under the appliance. Using free fl ames might cause fi re.
• Failure to observe the instructions for cleaning the hood and replacing the lters may result in a fi re.
• Exhaust air must not be vented through a fl ue used for removal of fumes produced by gas combustion appliances or other combustible materials, but must have a separate outlet. All national regulations governing extraction of fumes must be observed.
• There shall be adequate ventilation if the hood is being used at the same time as other appliances using gas or other combustible materials. The negative pressure of the room must not exceed 4 Pa (4x 10-5 bars). For this reason ensure that the room is well ventilated.
• Do not leave frying pans unattended when frying, as the frying oil may catch re.
• Before touching the light bulbs, ensure that they are cold.
• Do not use or leave the hood without the light bulb correctly fi tted, as this may cause electric shock.
• The hood is not a work surface, therefore do not place any objects on top of it or overload it.
• During all installation and maintenance operations wear appropriate working gloves.
• This appliance is not suitable for outdoor use.
WARNING: when the hob is in use, accessible parts of the hood may
become hot.
Installation and connection
After unpacking the appliance, check for any transport damage. In the event of problems, contact the After-sales Service. To prevent any damage, only remove the appliance from its polystyrene foam packaging at the time of installation.
Preparing for installation
WARNING: this is a heavy product; the
hood should only be lifted and installed by two or more people. The minimum distance between the hob and the bottom part of the hood must not be less than 65 cm for burning gas or other fuels and 50 cm for electric cookers. Before installation also check the minimum distances stated in the manual of the cooker. If the installation instructions for the cooker specify a greater distance between cooker and hood, this distance must be observed.
Electrical connection
Make sure the power voltage specifi ed on the appliance rating plate is the same as the mains voltage. This information can be found on the inside of the hood, under the grease fi lter. Power cable replacement (type H05 VV-F) must be carried out by a qualifi ed electrician. Contact an authorized service centre. If the hood is fi tted with an electric plug, connect the plug to a socket complying with current regulations, located in an accessible place. If no plug is fi tted (direct wiring to the mains), or if the socket is not located in an accessible place, a qualifi ed electrician should install a standardised double pole power switch that will enable complete
Loading...
+ 11 hidden pages