Whirlpool GVW9959KL2, GVW9959KQ2 Owner’s Manual

AUTOMATICWASHER
WITHCALYPSO+
WASHMOTION
For questions about features, operation/performance,
parts, accessories or service call: 1-800-253-1301.
In Canada, for assistance call: 1-800-461-5681,
for installation and service call: 1-800-807-6777.
or visit our website at
LAYA])O£_
AUTOMATICACON
MOVIMIENTODE
LAVADOCALYPSO+
Para consultas respecto a caracteristicas, operaci6n/desempe_o,
partes, accesorios o servicio tecnico, Ilame al : 1-800-253-1301.
o visite nuestra p&gina de internet www.whirlpeol.com
3955179C
LAVEUSE
AUTOMATIQUEA
MOUVEMENTDE
LAVAGECALYPSO+
Pour des questions h propos des caracteristiques, du fonctionnement/
de la performance, des pieces, accessoires ou du service,
composez le 1-800-253-1301.
Pour assistance au Canada, composez le 1-800-461-5681,
pour installation et service, composez le 1-800-807-6777.
ou visitez notre site internet h
www.whirlpool.com ou www.whirlpool.com/canada
Table of Contents/Indice/Table des matieres.. 2
TABLEOFCONTENTS
WASHER SAFETY .......................................................................... 3
INSTALLATION REQUIREMENTS ................................................ 4
Tools and Parts ............................................................................ 4
Location Requirements ................................................................ 4
Drain System ................................................................................ 5
Electrical Requirements ............................................................... 5
INSTALLATION INSTRUCTIONS .................................................. 6
Install Leveling Feet ...................................................................... 6
Connect Drain Hose ..................................................................... 6
Connect Inlet Hoses ..................................................................... 7
Secure Drain Hose ....................................................................... 8
Level Washer ................................................................................ 8
Complete Installation ................................................................... 8
FEATURES AND BENEFITS .......................................................... 9
CALYPSO ®Wash Motion ............................................................. 9
WASHER USE ............................................................................... 10
J
INDICE
SEGURIDAD DE LA LAVADORA ................................................. 22
REQUISITOS DE INSTALACION ................................................. 23
Herramientas y partes ................................................................ 23
Requisitos de ubicaci6n ............................................................. 24
Sistema de desag0e .................................................................. 24
Requisitos electricos .................................................................. 25
INSTRUCCIONES DE INSTALACI()N ......................................... 26
C6mo instalar las patas niveladoras .......................................... 26
C6mo conectar la manguera de desagiJe ................................. 26
C6mo conectar las mangueras de entrada ............................... 27
C6mo asegurar la manguera de desagOe ................................. 28
C6mo nivelar la lavadora ........................................................... 28
Complete la instalaci6n .............................................................. 28
CARACTER|STICAS Y BENEFICIOS .......................................... 29
Movimiento de lavado CALYPSO _ ............................................ 29
USO DE LA LAVADORA ............................................................... 30
Starting Your Washer ................................................................. 10
Pausing or Restarting ................................................................. 11
Changing Cycles and Options ................................................... 11
Cycles ......................................................................................... 11
What Happens in a Wash Cycle ................................................ 12
Options ....................................................................................... 13
LAUNDRY TIPS ............................................................................. 14
Loading ....................................................................................... 14
WASHER CARE ............................................................................ 15
Cleaning Your Washer ................................................................ 15
Water Inlet Hoses ....................................................................... 15
Vacation, Storage, and Moving Care ......................................... 15
TROUBLESHOOTING .................................................................. 16
LID INSTRUCTIONS ..................................................................... 18
ASSISTANCE OR SERVICE ......................................................... 20
WARRANTY .................................................................................. 21
Puesta en marcha de su lavadora ............................................. 30
C6mo detener o volver a poner en marcha ............................... 31
Cambio de ciclos y opciones ..................................................... 31
Ciclos .......................................................................................... 31
Lo que ocurre en un ciclo de lavado .......................................... 32
Opciones .................................................................................... 33
CONSEJOS DE LAVANDERIA ..................................................... 35
C6mo cargar............................................................................... 35
CUIDADO DE LA LAVADORA ..................................................... 35
Limpieza de su lavadora ............................................................ 35
Mangueras de entrada de agua ................................................. 36
Cuidado para las vacaciones,
almacenaje o en case de mudanza ........................................... 36
SOLUCION DE PROBLEMAS ...................................................... 36
INSTRUCCIONES DE LA TAPA ................................................... 39
AYUDA O SERVICIO TECNICO ................................................... 41
GARANT|A ..................................................................................... 42
TABLEDESMATIERES
SECURITI :!:DE LA LAVEUSE ....................................................... 43
EXIGENCES D'INSTALLATION ................................................... 44
Outillage et pieces ...................................................................... 44
Exigences de I'emplacement d'installation ............................... 44
Systeme de vidange ................................................................... 45
Specifications electriques .......................................................... 46
INSTRUCTIONS D'INSTALLATION ............................................ 47
Installation des pieds de nivellement ......................................... 47
Raccordement du tuyau de vidange ......................................... 47
Raccordement des tuyaux d'arrivee d'eau ................................ 48
Immobilisation du tuyau de vidange .......................................... 49
Reglage de I'aplomb de la laveuse ............................................ 49
Achever I'installation .................................................................. 49
CARACTC:RISTIQUES El" AVANTAGES ..................................... 50
Mouvement de lavage CALYPSO _ ............................................ 50
UTILISATION DE LA LAVEUSE ................................................... 51
Mise en marche de la laveuse ................................................... 51
Pause ou remise en marche ...................................................... 52
Changement des programmes et options ................................. 52
Programmes ............................................................................... 52
Ce qui se produit au cours d'un programme de lavage ............ 54
Options ....................................................................................... 54
CONSEILS DE LESSIVAGE .......................................................... 56
Chargement ................................................................................ 56
ENTRETIEN DE LA LAVEUSE ..................................................... 56
Nettoyage de la laveuse ............................................................. 56
Tuyaux flexibles d'alimentation de la laveuse ............................ 56
Preparation avant les vacances,
un entreposage ou un dem6nagement ...................................... 57
DI:!:PANNAGE................................................................................. 57
INSTRUCTIONS SOUS LE COUVERCLE ................................... 60
ASSISTANCE OU SERVICE ......................................................... 62
GARANTI E ..................................................................................... 63
WASHERSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,
including the following:
m Read all instructions before using the washer. mDo not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline, dry-
cleaning solvents, other flammable, or explosive substances as they give off vapors that could ignite or
explode.
mDo not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or explode.
mUnder certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.
If the hot water system has not been used for such a
period, before using the washing machine, turn on all hot water faucets and let the water flow from each for sever-
al minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an
open flame during this time.
,,,Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
_,Before the washer is removed from service or discarded,
remove the door or lid.
_,Do not reach into the washer if the drum, tub or agitator is
moving.
_,Do not install or store the washer where it will be exposed to
the weather.
_,Do not tamper with controls. _,Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and have the skills to carry out.
_,See "Electrical Requirements" for grounding instructions.
SAVE THESE INSTRUCTIONS
INSTALLATIONREQUIREMENTS
Assemble the necessary tools and supplies before beginning the
washer installation. The parts supplied are in the washer basket. Do not put the expanded foam plug back into the washer.
Tools needed for connecting the drain hose and water inlet hoses
Pliers that open to 1%6" (3.95 cm)
Flashlight (optional)
Parts supplied:
C
A.Drain hose "hook" B. Waterinlet hoses (2)
C.Flat water inlet hose washers(4)
Tools needed for securing the drain hose and leveling the washer
Adjustable or open end wrench %6" (14 mm)
Level
Wood block
Ruler or measuring tape
Parts supplied:
A
B C
A.Beaded tiestrap B.Front leveling feet with nuts (2) C.Rearself-adjusting feet (2)
Alternate Parts You May Need
Your installation may require additional parts. Ifyou are interested in purchasing one of the items listed here, call the toll-free
number on the cover or in the "Assistance or Service" section.
If You Have You Will Need to Buy
Laundry tub or Sump pump system (if not already standpipe taller available) than 96" (2.4 m)
1" (2.5 cm) 2" (5 cm) diameter to 1" (2.5 cm) diameter diameter standpipe adapter, standpipe Part Number 3363920
Overhead sewer Standard 20 gal. (76 L) 39" (99 cm) tall
drain tub or utility sink and sump pump (available from local plumbing suppliers)
Floor drain Siphon break, Part Number 285834;
additional drain hose, Part Number 8318155 and connector
kit, Part Number 285835
Drain hose too Drain hose, Part Number 8329541 and short connector kit, Part Number 285835
Lint clogged drain Drain protector, Part Number 367031
and connector kit, Part Number 285835
Water faucets 2 longer water fill hoses: beyond reach of 6 ft (1.8 m) Part Number 76314, fill hoses 10 ft (3.0 m) Part Number 350008
Selecting the proper location for your washer improves performance and minimizes noise and possible washer "walk."
Your washer can be installed in a basement, laundry room, closet, or recessed area. See "Drain System."
IMPORTANT: Do not install or store the washer where it will be exposed to the weather.
Proper installation is your responsibility. You will need:
A water heater set to deliver 120°F (49°C) water to the washer.
A grounded electrical outlet located within 4 ft (1.2 m) of where the power cord is attached to the back of the washer. See "Electrical Requirements."
Hot and cold water faucets located within 4 ft (1.2 m) of the hot and cold water fill valves, and water pressure of 20-100 psi (138-690 kPa).
A level floor with a maximum slope of 1" (2.5 cm) under entire washer. Installing the washer on carpeting is not
recommended.
A sturdy floor to support the washer weight (washer, water and load) of 315 Ibs (143 kg).
Do not store or operate your washer in temperatures at or below 32°F (0°C). Some water can remain in the washer and can cause damage in low temperatures. See "Washer Care" for winterizing
information.
Recessed area or closet installation
The dimensions shown are for the recommended spacing
allowed, except the closet door ventilation openings. The dimensions shown for the closet door ventilation openings are
the minimum required,
m_3"
19,,_
n
oio
I_, (_._ _n z_in.2
_h
(1sSom_) )
0" _ 27"_-_,.0"--_11"_25W'_.14" I_-
(0®) (_ cm) (0cm)(Z5®)(64.8_)(102 _)
A B
A. Front view B. Side view C. Closet door with vents
+
C
Additional spacing should be considered for ease of installation and servicing.
Additional clearances may be required for wall, door and floor moldings.
Additional spacing of 1" (2.5 cm) on all sides of the washer is recommended to reduce noise transfer.
If a closet door is installed, the minimum air openings in the top and bottom of the door are required. Louvered doors with air openings in the top and bottom are acceptable.
Companion appliance spacing should also be considered.
The washer can be installed using the standpipe drain system
(floor or wall), the laundry tub drain system, or the floor drain system. Select the drain hose installation method you need. See
"Tools and Parts."
Standpipe drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter standpipe of
2" (5 cm). The minimum carry-away capacity can be no less than 17 gal. (64 L) per minute. A 2" (5 cm) diameter to 1" (2.5 cm) diameter standpipe adapter kit is available. See "Tools and
Parts."
The top of the standpipe must be at least 39" (99 cm) high and no
higher than 96" (2.4 m) from the bottom of the washer.
39 _
(99cm)
A
Laundry tub drain system (view A)
The laundry tub needs a minimum 20 gal. (76 L)capacity. The top of the laundry tub must be at least 39" (99 cm) above the floor and no higher than 96" (2.4 m) from the bottom of the washer.
Floor drain system (view 13} The floor drain system requires a siphon break that may be
purchased separately. See "Tools and Parts." The siphon break must be a minimum of 28" (71 cm) from the
bottom of the washer. Additional hoses might be needed.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Do not use an extension cord. Faimureto folmow these instructions can result in death,
fire, or emectrica( shock.
A 120-volt, 60-Hz., AC-only, 15- or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is
recommended. It is recommended that a separate circuit serving only this appliance be provided.
This washer is equipped with a power supply cord having a 3 prong grounding plug.
To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong, grounding-type outlet,
grounded in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility
and obligation of the customer to have the properly grounded outlet installed by a qualified electrician.
If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the
ground path is adequate. Do not ground to a gas pipe. Check with a qualified electrician if you are not sure the
washer is properly grounded.
Do not have a fuse in the neutral or ground circuit.
GROUNDING INSTRUCTIONS
For a grounded, cord-connected washer:
This washer must be grounded= In the event of a malfunction or breakdown, grounding wilI reduce the risk of electrical shock by providing a path of least resistance for electric current. This washer is equipped with a cord having an equipment-grounding conductor and a grounding plug=The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local
codes and ordinances=
WARNING: improper connection of the equipment-
grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.
Do not modify the plug provided with the appliance - if it will
not fit the outlet, have a proper outlet installed by a qualified
electrician.
For a permanently connected washer: This washer must be connected to a grounded metal, permanent wiring system, or an equipment grounding
conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance=
4. Install the self-adjusting rear feet by pushing all the way up into the hole shown below.
A
y S
A. Rear panel of washer
B. Rear leveling foot C. Hole in bottom of washer to receive rear leveling foot D. Rear leveling foot pushed into bottom of washer
Tilt the washer forward and remove the wood block. Gently lower the washer to the floor.
Install the front leveling feet
6. Prop up the front of the washer about 4" (10.2 cm) with a
wood block or similar object. The block needs to support the weight of the washer.
7. Screw the lock nut onto each foot to within 1" (2.5 cm) of the base.
INSTALLATIONINSTRUCTIONS
Install the rear self-adjusting feet
1. To prevent floor damage, set the washer onto cardboard.
2. Move the washer to within approximately 3 ft (90 cm) of the final location.
3. Prop up the rear of the washer about 4" (10.2 cm) with a wood block or similar object. The block needs to support the
weight of the washer.
!
1"
(2.5cm)
f
8. Screw the feet into the correct holes at the front corner of the washer until the nuts touch the washer.
NOTE: Do not tighten the nuts until the washer is level.
g. Tilt the washer back and remove the wood block. Gently
lower the washer to the floor.
t
Proper connection of the drain hose protects your floors from damage due to water leakage. Carefully read and follow these instructions.
The drain hose is connected to your washer and is stored inside the washer cabinet.
Remove drain hose from washer cabinet
Gently pull the corrugated drain hose out of the washer from the
top of the hose. Continue to pull the hose until the end emerges.
Do not force excess drain hose back into the rear of the washer.
Laundry tub drain or standpipe drain Connecting the drain hose "hook" to the corrugated drain
hose
4. Using pliers, tighten the couplings with an additional
two-thirds turn.
NOTE: Do not overtighten. Damage to the valves can result. Clear the water lines
5. Run water through both faucets and inlet hoses, into a bucket or laundry tub, to get rid of particles in the water lines that
might clog the inlet valve screens.
Connect the inlet hoses to the washer
6. Attach the hose with the blue coupling to the COLD (left) inlet valve, Screw on coupling by hand until seated on the washer. Using pliers, tighten the couplings with an additional
two-thirds turn. NOTE: Do not overtighten, Damage to the valves can result.
A B
A. Snap either end of the drain hose "hook" to the drain hose at the
point where the corrugation begins.
B. Bend drain hose over drain hose "hook" and snap into place.
To prevent drain water from going back into the washer:
Do not straighten hooked end of the drain hose and force excess drain hose into standpipe. Hose should be secure but loose enough to provide a gap for air.
Do not lay excess hose on the bottom of the laundry tub.
Floor drain Do not install the drain hose "hook" on to the corrugated drain
hose. You may need additional parts. See Floor Drain under "Tools and Parts."
1. Insert a new flat washer (supplied) into each end of the inlet hoses. Firmly seat the washers in the couplings.
A B
A. Coupling
B. Washer
A. Cold water inlet valve (blue) B. Hot water inlet valve (red)
Attach the hose with the red coupling to the HOT water (right) inlet valve. Screw on coupling by hand until seated on the washer. Using pliers, tighten the couplings with an additional
two-thirds turn. NOTE: Do not overtighten. Damage to the valves can result.
Check for leaks
8. Turn on the water faucets and check for leaks. A small amount of water might enter the washer. You will drain this
later. NOTE: Replace inlet hoses after 5 years of use to reduce the
risk of hose failure. Record hose installation or replacement dates for future reference.
Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.
Connect the inlet hoses to the water faucets Make sure the washer basket is empty.
2. Attach the hose with the red coupling to the hot water faucet. Screw on coupling by hand until seated on the washer.
3. Attach the hose with the blue coupling to the cold water faucet. Screw on coupling by hand until seated on the
washer.
1. Drapethepowercordovertheconsole.
2. Movethewashertoitsfinallocationandremoveany cardboardusedtomovewasher.
3. Locatethebeadedtiestrap(supplied).
(22>
Beaded tie strap
4. Wrap the drain hose to the laundry tub leg or standpipe with the tie strap. (See illustrations A and B.)
B
If the washer faucets and the drain standpipe are recessed, put the hooked end of the drain hose in the standpipe. Tightly
wrap the tie strap around the water inlet hoses and the drain hose. (See illustration C.)
Do not force excess drain hose back into the rear of the washer.
After the washer is in the final location and level, use a %6" (14 mm) open-end wrench to turn the nuts on the feet tightly against the washer cabinet.
IMPORTANT: If the nuts are not tight against the washer cabinet, the washer may vibrate.
Tilt the washer forward until the rear of the washer is at least 4" (10.2 cm) off the floor. You may hear the self-adjusting rear
feet click into place. Lower the washer to the floor.
1. Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended grounding method. See "Electrical Requirements."
2. Check to be sure all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.
3. Check to be sure you have all of your tools.
4. Dispose of/recycle all packaging materials. Keep the expanded foam plug for use if the washer should be transported.
5. Check to be sure the water faucets are on.
6. Check for leaks around faucets and inlet hoses.
Properly leveling your washer prevents excessive noise and vibration.
1. Check the levelness of the washer by placing a level on the top edge of the washer, first side to side, then front to back.
2. If the washer is against a wall, move the washer out slightly before tipping back. If the washer is not level, prop up the front of the washer with the wood block and adjust the feet up or down as necessary. Repeat this step until washer is
level.
Electrica_ Shock Hazard
Pmuginto a grounded 3 prong outlet. Do not remove ground prong, Do not use an adapter.
Do not use an extension cord. Failure to follow these instructions can resumt in death,
fire, or eJectricam shock.
7. Plug into a grounded 3 prong outlet.
8. Remove the protective film on the console and any tape remaining on the washer.
9. Read "Washer Use."
10. Totest your washer, measure 1/2the normal recommended amount of powdered or liquid High Efficiency detergent and pour it into the detergent dispenser. Close the lid. Select any cycle, and then press START. Allow it to complete one whole cycle.
FEATURESANDBENEFITS
!Lilyii: ,ii!!!iO ii!i'iii :: , iiii:iii % i:ii
Your new washer works differently than most washers that you are accustomed to. The most striking difference is that the washer does not have an agitator. It uses the innovative
CALYPSO _ wash motion. The Wash Plate, at the bottom of the basket, creates a motion that lifts, rolls and bounces your wash
load through a mixture of water and detergent that is continuously reapplied to the load to force out stains and soils.
Auto Water Level This washer senses load size and composition, then
automatically adjusts water level for best cleaning and rinsing performance. It eliminates the guesswork. The water level is just right for every wash load size.
Larger Load Size Because there is no agitator, you can wash larger, bulkier items
such as a sleeping bag. You are also able to wash more clothes at one time, which means fewer loads. The SUPER CAPACITY PLUS system allows for loads such as king size bedding. You can wash a pillow or a large stuffed teddy bear.
QUIET WASH TM Plus System The QUIET WASW MPlus reduces water sounds and ringing
noises. The cabinet and base are insulated with sound- dampening materials. An additional tub wrap is added for
superior vibration and sound-dampening.
The CALYPSO e_Wash Motion
Is easier to load (because there is no agitator).
Is gentler on clothes. There is less wear and tear on your clothes.
Fluffs the load after the final spin to make unloading easier.
Flexible Electronic Controls Flexible electronic controls are easy to use whether you are a
beginner or an "expert."
Smart Dispensers
The smart dispensers make your washer truly automatic. It is
unnecessary for you to return to the washer during the cycle to add detergent, bleach, or fabric softener.
Laundry products are diluted with fresh water and added to the load at the proper time in the wash cycle.
Suspension System To reduce washer "walk" and "out of balance" conditions, your
new washer combines:
4 Spring damper struts to isolate vibration
2 Shock absorbers at the washer base to minimize movement
Balance ring at the top of the wash basket to minimize vibration
Stainless Steel Basket The Stainless Steel basket eliminates corrosion and enables
higher spin speeds for more water extraction, reducing drying time.
High-Efficiency Wash System Your new top loading, high-efficiency washer saves time with
fewer, larger loads, conserves resources and lowers your water and energy bills too.
Force Filter Wash/Rinse System This washer filters 100% of the wash and rinse water. The water
is filtered then recirculated. The force filter traps sand and dirt, flushing it down the drain, so it is not redeposited on the clean
clothes.
WASHERUSE
The following is a guide to starting your washer. Periodic references to other sections of this manual provide more detailed
information. f. Place a load of sorted clothes into the washer. Load to a level
shown below. See "Loading."
Status
Fire Hazard
Never place items in the washer that are dampened with gasoline or other flammable fluids.
No washer can completely remove oil, Do net dry anything that has ever had any type of oil on
it (including cooking oils). Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
2. Pour measured powdered or liquid High Efficiency detergent into the detergent dispenser.
Use with High Efficiency detergents. The package for this
type of detergent will be marked "HE" or "High Efficiency." The new wash action of the CALYPSO ® system along with less water, could create too much sudsing if regular detergent is used. HE detergents such as TIDE®HE are made to produce the right amount of suds for the best performance. Follow the manufacturer's instructions to determine the amount of detergent to use.
NOTE: You can add color-safe bleach (powdered or liquid) to this dispenser. Be sure to match powdered color-safe bleach with powdered detergent or match liquid color-safe bleach with liquid detergent.
10
3.
Pour measured liquid chlorine bleach into the liquid chlorine bleach dispenser, if needed. Bleach is diluted and automatically dispensed at the proper time during the wash cycle.
Do not overfill. Do not use more than 1 cup (250 mL) for a full load. Use less with a smaller load size.
Follow the manufacturer's directions for safe use.
To avoid spilling, use a cup with a pouring spout. Do not let bleach splash, drip, or run down into the washer basket.
A small amount of water will be left in the dispenser. This is normal.
NOTE: Use only liquid chlorine bleach in this dispenser.
4.
Pour measured liquid fabric softener into the fabric softener dispenser, if desired.
You can change Cycles and Options any time before Start is pressed.
A short tone sounds when a change is selected.
Two short tones sound if an unavailable combination is selected. The last selection will not be accepted.
Changing Cycles after pressing Start
1. Press STOP/CANCEL twice.
2. Select the desired wash cycle.
3. Press START.
The washer restarts at the beginning of the new cycle. NOTE: If you do not press Start within 5 minutes of pausing the
washer, the washer automatically shuts off.
Changing Options after pressing Start You can change an Option anytime before the selected Option
begins.
1. Press STOP/CANCEL
2. Select the new Option.
3. Press START to continue the cycle.
Do not overfill. The dispenser holds 3 oz (94 mL), or a capful of fabric softener.
The fabric softener is dispensed in the final rinse.
Do not spill or drip any fabric softener on the clothes.
A small amount of water will be left in the dispenser. This is normal.
NOTE: Use only liquid fabric softener in this dispenser.
5.
Close the washer lid.
6.
Select a Cycle. This turns on the washer display. See "Cycles."
7.
Select an Option, if desired. See "Options."
8.
Press START. The wash cycle begins and the display shows the estimated remaining time.
NOTE: If you do not press Start within 5 minutes of selecting the cycle, the washer automatically shuts off.
To pause the washer at any time Press STOP/CANCEL.
To restart the washer Close the lid and press START.
Use these pads to choose the right wash cycle for the type of fabrics you are washing.
@ woo(
For most loads, use the time recommended in the preset cycle settings.
For heavy soil and sturdy fabrics, use more wash time.
For light soil and delicate fabrics, use less wash time.
Whitest Whites
This cycle introduces liquid chlorine bleach to the load at the proper time for improved whitening of your heavily soiled white fabrics. Use this cycle to get medium-speed wash action and high-speed final spin. For maximum soil and stain removal, liquid
chlorine bleach must be used.
Heavy Duty
Use this cycle for loads of sturdy, colorfast fabrics such as work clothes. Cycle combines high-speed wash action and high spin speed.
11
Normal
Use this cycle for normally soiled cottons and linens. Cycle combines medium-speed wash action and high spin speed.
Jeans/Darks
Use this cycle for dark, colored items that may run or fade. Cycle combines low/medium-speed wash action and high-speed final spin.
Bulky Items
Use this cycle for large items such as blankets and comforters. Cleaning starts with a spray of water and detergent mixture to
thoroughly saturate your large load. This is followed by low/
medium wash action and low/medium spin speed to maintain load balance.
Quick Wash
Use this cycle for small, lightly soiled loads that are needed in a hurry. Fast cleaning starts with a continuous spray of water and detergent mixture as the load is spun at extra-low speed, followed by a brief period of low/medium-speed wash action. High spin speed reduces drying time. For the fastest results, select warm
wash.
Delicate Casual
Use this cycle to get low-speed wash action for no-iron fabrics and garments indicating "Permanent Press," "Wrinkle Free," or "Gentle" cycle on the care label. Low/medium spin speed is used
to reduce wrinkling.
PRESET CYCLE SETTING
Cycle Preset Soil Level Wash/Rinse
Minutes Temperature (Total
Time)
WHITEST 49 Normal Hot/Cold
WHITES (Not
Temperature Controlled)
HEAVY DUTY 53 Extra Warm/Cold
Heavy
NORMAL 44 Normal Warm/Cold
JEANS/DARKS 44 Normal Warm/Cold
BULKY ITEMS 44 Normal Warm/Cold
QUICK WASH 23 Refresh Warm/Cold
DELICATE 38 Normal Warm/Cold CASUAL
WOOL 28 Refresh Cold/Cold
HAND WASH 30 Refresh Cold/Cold
Wool
Use this cycle for washable items that are normally dry cleaned. Cycle combines extra-low speed spray cleaning and wash action
to provide gentle care for delicate items, such as wool sweaters
and silk blouses. Low spin speed helps garments maintain their shape.
Hand Wash
Use this cycle for garments labeled "Hand Wash" and special care items. Gentle cleaning starts with a continuous spray of water and detergent mixture as the load is spun at extra-low speed. This lasts for about one minute and is followed by a brief period of extra-low wash action. Low/medium spin speed helps reduce wrinkling.
Garments are labeled "Hand Wash" because:
The fiber construction may be sensitive to wash action.
The fabric contains sensitive dyes that may bleed. NOTE: Some "Hand Wash" items, particularly wool, naturally
shrink when washed. Keep this in mind when you purchase items labeled "Hand Wash." Items that shrink should be dried flat.
When still wet, block these items by gently stretching to original measurements.
Preset Cycle Settings
For ease of use, preset cycle settings provide the recommended
fabric care settings for each cycle.
To use the preset cycle settings:
1. Select the cycle you want by pressing one of the pads under CYCLES. The preset cycle settings will be displayed (see chart).
2. Press START. The wash cycle will begin.
Total Cycle Time in minutes will appear inthe display while you are making selections. The total cycle time will remain, including an estimated time for drain and fill times, once Start is pressed.
........................ _7¸¸ _..................................... _i..........
After you have loaded the washer, selected the cycle and options and pressed START, your washer does the following:
Distributes the load
Load is initially fluffed to distribute the load before water is added.
Fills
Water enters through the dispenser to mix with the detergent. Water continues to be added until the load is soaked and just enough water is present to maintain the spray. This way of washing and rinsing uses less water and makes the detergent more effective in cleaning your clothes. As a result, you will see only a wet load and not afull tub of water, if you open the
lid.
Washes
As the washer continues to fill, a low-speed spin begins and the detergent/water mixture is sprayed onto the load.
The spinning stops and the CALYPSO _wash motion begins, while the wash water continues to be sprayed onto the moving load. The length of wash depends on the cycle and
wash time selected.
The CALYPSO ®wash motion features five wash speeds in combination with low-speed spin sprays for a variety of fabric
care needs.
Liquid chlorine bleach is dispensed in the last 2 to 3 minutes of the wash cycle to help ensure the best cleaning results.
The wash water is then drained and spun out before rinsing begins.
12
Rinses
Rinsing is accomplished in the same manner as washing. Fresh water is added to a slow spinning load. Then the load moves through the spray rinses. The water is then drained away and the rinsing process is repeated. The number of rinses varies depending on the cycle.
During the last rinse, fabric softener is dispensed into the bottom of the tub and applied to the load.
Final Spin
The last of the rinse water is drained and the load is spun. The amount of spinning depends on the cycle selected.
To make unloading easy, the load is peeled off the sides of the
basket by the CALYPSO _wash motion.
Normal Sounds
As with any new product, you will hear sounds that you are not
accustomed to. You may hear various sounds occurring during
the washing, rinsing and spinning process. Between changes in
wash actions, there will be momentary pauses. You will hear water spraying and splashing during the wash and rinse cycles.
These new sounds and pauses are part of normal washer
operation. See "Troubleshooting."
Extra Rinse Selecting this option provides a second rinse with the same
water temperature as selected for the first rinse. An Extra Rinse can be added to any wash cycle.
Extend Spin This option adds an additional 3 minutes of spin to any cycle to
reduce drying time and save energy. If you select EXTEND SPIN and do not select a wash cycle, you will get an 8 minute, high-speed spin.
Wash/Rinse Temp Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow garment label instructions.
Warm rinses leave the loads dryer than cold rinses. Warm rinses increase wrinkling. In cold climates, a warm rinse makes the load more comfortable to handle. Cold rinses save energy.
Temperature Guide
Wash Water Temperature Suggested Fabrics
HOT Whites and pastels
Heavy soils
Use options to customize your wash cycles.
0 Soak
Rinse & Spin
Use this option to get a combination of rinses and spins followed by a high-speed spin. The time display will include an estimate of how long it will take to fill and drain the washer. Fabric softener can be added to the Fabric Softener dispenser.
When to use Rinse & Spin
For loads that need rinsing only.
For completing a cycle after the power has been off.
To add fabric softener to load.
To use or change Rinse & Spin settings:
1. Add fabric softener to the dispenser (if desired).
2. Press the RINSE & SPIN control until the RINSE & SPIN indicator light glows.
3. Press START.
WARM Bright colors
Moderate to light soils
COLD Colors that bleed or fade
Light soils
In wash water temperatures colder than 70°F (21°C), detergents do not dissolve well. Soils may be difficult to remove.
Assured Water Temp Assured Water Temp electronically senses and maintains a
uniform water temperature. It regulates incoming hot and cold water. It is automatically turned On when a cycle is selected. See "Preset Cycle Settings" in "Cycles."
Assured Water Temp is available with WARM/WARM, WARM/ COLD and COLD/COLD settings. HOT/COLD (top) and COLD/ COLD (bottom) are for tap water that is not temperature
controlled.
Hot 0 Cold
Warm O Warm _ Assured
Warm O Cored j WaterCold O Cold Temp
Cold 0 Co_d
Soak
Use this option for set-in stains and soil that need extra time for removal. Soaking in this washer is different than in a conventional washer. The washer sprays the load with water and detergent for 4 minutes at extra low spin speed followed by a brief period of wash action at the speed of the selected cycle. Then another 4 minutes of spraying and extra low spinning occurs. The wash action then pauses for the detergent to work on the soils. The SOAK feature is followed by the selected cycle. Using SOAK will extend your wash cycle by 16 minutes.
Assured Water Temp ensures consistent cleaning. When using Assured Water Temp on COLD/COLD, warm
water is added to the washer to maintain a temperature of approximately 75°F (24°C), so detergents dissolve properly.
Warm washes are regulated at approximately 100°F (38°C). Warm rinses are regulated at approximately 75°F (24°C). This
is a cooler warm rinse than you are used to, but it saves energy, reduces wrinkling, and gives proper rinsing. The load is a comfortable temperature to remove from the washer.
13
Soil Level Soil Level is preset for each wash cycle. See "Preset Cycle
Settings" in "Cycles." As you press Soil Level pad, the cycle time (minutes) will increase or decrease in the ESTIMATED TIME REMAINING display and a different Soil Level light will glow. To get the minimum wash time, press the pad until the indicator light
next to REFRESH illuminates. This is the shortest wash time available for that cycle.
O Extra Heavy _i_ Heavy
O Normal O Light
0 Refresh
Indicator Lights Cycle
Located next to each pad, these lights show the cycle /ou have selected.
Options
These lights show the Options you have selected.
Status
These lights show what portion of the cycle the washer is operating. Soak and Extra Rinse status lights will glow if the option was selected.
Status
o o Q
Soak Wash Rinse
0 0
Extra Spin & Rinse FUuff Cycle
0
Compmete
When a wash cycle is started, the estimated time remaining for
the cycle, including fills and drains, will be displayed. The time
will count down to the end of the cycle.
Adjustable Cycle Signal
A tone will sound at the end of the cycle. The sound level of this tone can be adjusted by pressing CYCLE SIGNAL. The volume of tone you will hear at the end of the cycle will sound as the pads
are pressed.
0 Louder 0 Softer
0 Off
LAUNDRYTIPS
Preparing clothes for washing Follow these recommendations to help you prolong the life of
your garments.
Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles, and other hard objects to avoid scratching the washer interior. Remove non-washable trim
and ornaments.
Empty pockets and turn them inside-out.
Turn down cuffs; brush away lint and dirt.
Turn synthetic knits inside-out to avoid pilling.
Tie strings and sashes so they will not tangle.
Mend tears, loose hems, and seams.
Treat spots and stains.
Stained or wet garments should be washed promptly for best results.
Sorting
Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together. Separate lint-givers (towels, chenille) from lint-takers (corduroy, synthetics, permanent press). When possible, turn lint-givers inside-out.
Separate dark colors from light colors, colorfast items from noncolorfast items.
Operating Controls
Start Press START to start your washer after a cycle has been
selected. Be sure all desired Options have been selected. The lid must be closed for the washer to start.
Stop/Cancel Press STOP/CANCEL once to pause or stop the washer at any
time. Press START to complete the cycle from where itwas stopped. Press STOP/CANCEL twice to turn off the washer.
Sort by fabric and construction (sturdy cottons, knits, delicate items).
Unloading
Remove clothes from washer after the cycle is completed. Metal objects such as zippers, snaps, and buckles may rust if left in the washer basket for a long time.
Loading suggestions (maximum size loads)
Super Capacity Plus Washers
Heavy Work Clothes
4 jeans 2 sweatpants 4 workpants 2 sweatshirts
4 workshirts
Towels 10 bath towels
14 washcloths
10 hand towels
Mixed Load
3 sheets (1 king, 2 twin) 9 T-shirts 4 pillowcases 9 shorts
3 shirts 10 handkerchiefs 3 blouses
14
WASHERCARE
Cleaning the exterior Use a soft, damp cloth or sponge to wipe up any spills such as
detergent or bleach, Occasionally wipe the outside of your washer to keep it looking new.
Cleaning the interior
To clean your washer interior, add 1 cup (250 mL) of chlorine
bleach and 1 scoop or cap full of High Efficiency detergent into
your dispenser, and run the washer through the NORMAL cycle
using hot water. Repeat this process if necessary. NOTE: Remove any hard water deposits using only cleaners
labeled as washer safe,
Replace inlet hoses after five years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear or leaks are found.
When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.
Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your washer. If storing or moving your washer during freezing weather,
winterize it.
Non-use or vacation care:
Operate your washer only when you are at home. If you will be on vacation or not using your washer for an extended period of time,
you should:
Unplug washer or disconnect power.
Turn off the water supply to the washer. This helps avoid accidental flooding (due to a water pressure surge) while you are away.
To winterize washer:
1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. Put 1 qt (1 L) of R.V.-type antifreeze in the basket and run washer on an EXTEND SPIN cycle.
4. Disconnect the drain from the drain system,
5. Unplug washer or disconnect power.
To use washer again:
1. Flush water pipes and hoses,
2. Reconnect water inlet hoses.
3. Turn on both water faucets.
4. Plug in the washer or reconnect power.
5. Run the washer through any cycle with 1/2the normal recommended amount of High Efficiency detergent to clean
out the antifreeze.
To transport the washer:
1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. If washer will be moved during freezing weather, put 1 qt (1 L) of R,V,-type antifreeze in the basket. Run washer on an EXTEND SPIN cycle.
4. Disconnect the drain from the drain system.
5. Unplug washer or disconnect power.
6. Place the inlet hoses into the basket,
7. Drape the power cord and drain hose over edge and into the basket.
8. Place the expanded foam plug retained from the washer's shipping material into basket opening. Close the lid and put a piece of tape over the lid and down to the front of the washer.
Reinstalling the washer
1. Follow the "Installation Instructions" to locate, level and connect the washer.
2. Run the washer through any cycle with 1/2the normal recommended amount of High Efficiency detergent to clean out the antifreeze, if used.
15
TROUBLESHOOTING
First try the solutions suggested here and possibly avoid the cost of a service call...
Washer displaying code messages.
If any of these codes continue to occur, call for service.
"PF" (Power Failure) flashes Was the washing cycle interrupted by a power failure? Press START to continue the cycle from the moment that power was lost, - OR - Press STOP/CANCEL to clear the display and completely cancel the cycle,
"FL" (Over Fill) flashes The washer will beep every 10 seconds with no time-out, The pump will cycle one half minute on, one half minute off, until the overfill switch is reset or power is discontinued to the unit. Press STOP/CANCEL to clear the display. Shut off the water
faucets to the inlet hoses if water continues to flow,
"Er" (Processor Reset Error) Cycle information was not stored during a power failure, Press STOP/CANCEL to clear the display.
"LF" (Long Fill) flashes Are the water inlet hoses kinked or clogged?
Are the water inlet valve screens clear? Press STOP/CANCEL to clear the display.
"CE" (Communications Error) flashes - beeps once Press STOP/CANCEL to clear the display,
"Ld"(Long Drain) flashes Is the drain hose kinked or clogged? Press STOP/CANCEL to clear the display.
"CA" or "CL" (Current Limit) Is the washer overloaded?
Press STOP/CANCEL to clear the display,
"Or" (Open Relay) Washer operation failure. Call for service.
"Sr" (Stuck Relay) Washer operation failure. Call for service.
"LS" (Lid Switch Error) flashes Is the washer lid open? Close the lid and press START to continue the cycle.
Is the lid closed? Open and close the lid. Press STOP/ CANCEL to clear the display.
"SL" (Suds Lock) Press STOP/CANCEL to clear the display. Extend Spin load; restart cycle. Do not add detergent. Use cold water.
"dt" (Diagnostic Tests) For service diagnostics only. Press STOP/CANCEL to clear the display.
"ob" (Off Balance) Is the load unbalanced? Redistribute the load, Close lid and
press START.
Washer won't fill, rinse or wash
Does the water level seem too low, or does the washer appear to not fill completely? This washer uses very little water and does not fill completely, Water will not be seen over the top of the wash plate,
Checkthe following: Is the power cord plugged into a grounded 3 prong outlet?
Is there power at the plug? Check electrical source or call electrician,
Are the hot and cold water faucets turned on? Is the water inlet hose kinked?
Are the water inlet valve screens clogged?
Washer stops
Check the following: Is the power cord plugged into a grounded 3 prong outlet?
Is there oversudsing? Cancel the current cycle, Press RINSE & SPIN to drain the load. Re-select your desired cycle and press START. Do not add detergent. Use cold water.
Are the hot and cold water faucets turned on? Is the water inlet hose kinked?
Are the water inlet valve screens clogged?
After opening the lid, did you press START? If the lid is opened during washer operation, the washer will stop. Closing the lid will not restart the washer. You must press START.
Is there power at the plug? Check electrical source or call electrician.
Has a fuse blown, or has a circuit breaker tripped? If problem continues, call electrician,
Are you using an extension cord? Do not use an extension cord.
Is thewasher overloaded? Wash smaller loads. See "Starting Your Washer" for
maximum load size.
Did you add more items to the load once the washer started?
Once the load is wet, there may appear to be space for more items. For best results determine load size with dry items only.
Washer won't drain or spin
Is the drain hose clogged, or the end of the drain hose more than 96" (244 cm) above the floor? See "Installation Instructions" for proper installation of drain
hose.
Is the lid open? The lid must be closed during operation,
Is there excessive sudsing? Use High Efficiency detergents such as TIDE ®HE, which
produce less suds. Follow manufacturer's directions,
Is your voltage low? Check electrical source or call electrician. Do not use an
extension cord,
16
Washer continues to fill or drain, or the cycle seems
stuck
Does the drain hose fit too tightly in the standpipe, or is it taped to the standpipe?
The drain hose should be loose yet fit securely. Do not seal the drain hose with tape. The hose needs an air gap. See
"Installation Instructions."
Washer basket is crooked
Are the load balanced and the washer level?
The wash load should be balanced. The washer must be level. The front feet should be properly
installed and the nuts tightened. Reset the rear leveling legs, if needed. See "Installation Instructions."
Washer makes noise
Is the load balanced, and is the washer level? The wash load should be balanced. See "Starting Your
Washer" for maximum load size. The washer must be level. The front feet should be properly
installed and the nuts tightened. Reset the rear leveling legs if needed. See "Installation Instructions."
Are the self-adjusting rear feet installed? Can you hear water spraying? This is part of the wash action.
If water is drained quickly from the washer, you may hear air being pulled through the pump. This happens during the end
of draining. It is normal. When the cycle changes from washing to draining or
spinning, you may hear a noise as the drive system shifts. This is normal.
Are you washing items with metal snaps, buckles or zippers?
You may hear metal items touching the basket. This is normal.
Are you washing a small load?
You will hear more splashing sounds when washing small loads. This is normal.
Is the washer installed on a solid floor? Refer to the "Installation Instructions" for flooring
requirements.
Washer leaks
Check the following: Are the fill hoses tight? Are the fill hose washers properly seated? Is the drain hose clamp properly installed? See
"Installation Instructions."
Is the sink or drain clogged? Sink, floor drain and standpipe must be able to handle 17 gal.
(64 L) of water per minute.
Is water bouncing off the tub ring or the load?
The wash load should be balanced and not overloaded. If the wash load is unbalanced or overloaded, the fill or spray rinses
can bounce off the load. The washer must be level. The front and rear feet should be
properly installed and the nuts tightened. Reset the self- adjusting rear feet if needed. See "Installation Instructions."
Did you pull the drain hose from the washer cabinet and
install it in a standpipe or laundry tub?
See "Installation Instructions."
Check household plumbing for leaks.
Dispensers clogged or leaking
Is the laundry products in the correct dispenser?
Add the correct amounts of detergent, fabric softener or chlorine bleach to the correct dispenser. Add powdered or
liquid color-safe bleach to the detergent dispenser. Do not use the chlorine bleach dispenser for color-safe bleach.
Load too wet
Did you use the right cycle for the load being washed?
Select a cycle with a higher spin speed. Did you use a cold rinse?
Cold rinses leave loads wetter than warm rinses. This is normal.
Did you use regular laundry detergent?
Regular detergent can cause too much suds and leave the load wet. Use High Efficiency detergents such as TIDE®HE.
Residue or lint on load
Did you add detergent to the dispenser?
For best results, use the dispenser to dissolve the detergent.
Did you sort properly? Sort lint givers (towels, chenille) from lint takers (corduroy, synthetics). Also sort by color.
Did you overload the washer?
The wash load must be balanced. See "Starting Your Washer" for maximum load size. Lint can be trapped in the
load if overloaded. Wash smaller loads.
Checkthe following: Was paper or tissue left in pockets?
Did you use enough detergent? Use High Efficiency detergents such as TIDE ®HE. Follow manufacturer's directions. Use enough detergent to hold the
lint inthe water.
Is your water colder than 70°F (21°C)? Wash water colder than 70°F (21 °C) may not completely dissolve the detergent.
Are you using a gentle wash cycle? Consider using liquid detergent for slow-speed cycles such as Bulky Items, Hand Wash or Wool.
Stains on load
Did you add detergent to the dispenser? For best results, use the dispenser to dissolve the detergent.
Did you use enough detergent? Use enough detergent to remove soil and hold it in suspension. Use High Efficiency detergents such as TIDE _HE, at the
manufacturer's recommended amounts.
Did you add fabric softener directly to the load? Use your fabric softener dispenser. Do not drip fabric softener
on clothes.
Is there above average iron (rust) in water? You may need to install an iron filter.
17
Did you properly sort the load?
Sort dark clothes from whites and lights. Did you unload the washer promptly?
To avoid dye transfer, unload the washer as soon as it stops. Did you use a fabric softener dispensing ball?
Use the fabric softener dispenser provided with the washer. Dispensing balls will not operate correctly with this washer.
Did you use powder detergent in a low-speed cycle? Consider using liquid detergent.
Did you add detergent, chlorine bleach or fabric softener too late in the cycle?
Detergent and chlorine bleach should be added to the dispensers before starting the washer. Fabric softener should be added before the rinse status light is lit,
Did you use QUICK WASH on a large load? QUICK WASH is designed to wash only a few items for best
results.
Load is wrinkled
Did you properly add chlorine bleach?
Do not pour chlorine bleach directly on load. Use your liquid chlorine bleach dispenser. Wipe up bleach spills. Undiluted bleach will damage fabrics. Do not place load items on top of the bleach dispenser when loading and unloading the washer.
Did you follow the manufacturer's care label instructions?
Cycle too long
Are you using a High Efficiency Detergent? If using a regular sudsing detergent, the washer may be using
extra rinses to remove the suds, which will cause the cycle to run longer. Use a High Efficiency detergent such as TIDEc_HE,
which produces less suds.
Wash temperature is not what I picked
Are the hot and cold water inlet hoses reversed? As washing progresses, the wash temperature will decrease slightly for hot and warm washes. This is normal.
Did you unload the washer promptly? Unload the washer as soon as it stops.
Did you use the right cycle for the load being washed? Use the Delicate Casual cycle or another cycle with a low spin speed to reduce wrinkling.
Did you overload the washer? The wash load must be balanced and not overloaded. Loads
should move freely during washing, Are the hot and cold water hoses reversed?
Check to be sure the hot and cold water hoses are connected to the right faucets. See "Installation Instructions."
Load is tangled or twisted
Did you overload the washer? See "Starting Your Washer" for maximum load size. Loads should move freely during washing.
Gray whites, dingy colors
Did you properly sort the load? Dye transfer can occur when mixing whites and colors in a
load. Sort dark clothes from whites and lights.
Was the wash temperature too low? Use hot or warm washes if safe for the load. Make sure your hot water system is adequate to provide a hot water wash.
Did you use enough detergent, or do you have hard
water?
Use more detergent for washing heavy soils in cold or hard water. Water temperature should be at least 70°F (21°C) for soap to dissolve and work properly.
Water remaining in bottom of dispenser
Did the dispenser drain properly? A small amount of water will be left in the dispenser. This is
normal.
LIDINSTRUCTIONS
These instructions are found under the lid of your washer.
HEAVYDUTY
NORMAL
OELICATE/ BASBAL
#ELICATE/ BASUAL
HAND WASH
* * HOTWASH
* WAR_ WASH
* COLDWASH
EXTRABIRTY
COTTBNS SYNTHETICS/
BLENDS KNITS
LiNGERiE
ANYBLEACH
NON=CHLORINE BLEACH
DONOTBLEACH
Garment damage
Checkthe following: Were sharp items removed from pockets before washing?
Empty pockets, zip zippers, snap or hook fasteners before washing.
Were strings and sashes tied to prevent tangling? Were items damaged before washing?
Mend rips and broken threads in seams before washing.
Did you overload the washer? See "Starting Your Washer" for maximum load size.
18
FOR BEST WASH PERFORMANCE USE A HIGH EFFICIENCY / LOW SUDSING DETERGENT.
1. CYCLE Select the cycle according to the fabric type being washed. Press START, if the OPTIONS are at the desired settings.
2. OPTIONS
SOIL LEVEL Fine tunes wash time for different levels
of dirty clothes.
WATER TEMP Provides best care and cleaning on
Assured Water Temp selections.
WHITEST WHITES
For extra whitening and brightening (with
1 cup [250 mL] of liquid chlorine bleach).
Deep cleans white items such as underwear, sheets and socks.
HEAVY DUTY For sturdy fabrics and heavy soil.
Deep cleans ground-in dirt on work clothes and play wear
NORMAL For mixed loads and average soil.
Cleans a variety of items including linens and everyday wear.
JEANS/DARKS For dark colored cotton items that may run
or fade.
Reduces fading of dark colored items such as denim jeans and casual cottons. (To minimize fading, turn garment inside out before laundering.)
BULKY ITEMS For thoroughly washing large, bulky items.
Cleans big items such as comforters,
pillows and rugs.
QUICK WASH
For quickly cleaning a few lightly soiled items.
Cleans and refreshes your favorite item of
clothing in a hurry.
DELICATE/ CASUAL
For fabric blends and all garments indicating "gentle" cycle on the care label.
Keeps colored items such as golf shirts, cottons sweaters and wrinkle-resistant
clothes looking new and uses a slower spin to prevent wrinkles from setting.
WOOL For many washable items normally dry
cleaned.
Gently cleans items such as wool sweaters and silk blouses.
SOAK Loosens soils when added to any cycle.
EXTRA RINSE Adds an additional rinse to any cycle.
EXTEND SPIN Extracts more water from heavy items.
it's best to wash stains
as soon as possib|e.
¢" _ Ring around
" ,yv
the CoJJar
MeshanicaJ Oil
Dirty
"_" Mud
TomatoProducts
Ketshup,
f_ Perspiration,
Deodorants
Use Jiquid
shJorine
bJeash dispenser
/
. rass
Blood
1_ Bail PointPen,
ink
<_) Chocolate,
Coffee
Cosmetics WARM or HOT
Do not tambJe dry soiled or stained items. Heat may psrrnaneatJy set stains,
Use hottest wash
temperature
safe for fabric,
WARM orHOT
WARM orHOT
WARM orHOT
WARM orHOT
WARM orHOT
WARM orHOT
COLDer WARM
WARMorHOT
WARMorHOT
HAND WASH For garments indicating "hand wash" on
the care label.
Gently cleans fine washables such as lingerie and sweaters.
RINSE & SPIN Rinses the load without washing.
19
ASSISTANCEORSERVICE
Before calling for assistance or service, please check "Troubleshooting." It may save you the cost of a service call. If
you still need help, follow the instructions below.
When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request.
If you need replacement parts If you need to order replacement parts, we recommend that you
only use FSP®factory specified parts. These parts will fit right and work right because they are made with the same precision used to build every new WHIRLPOOL ®appliance.
To locate FSP®replacement parts in your area:
In the U.S.A., call the Customer Interaction Center at 1-800-253-1301, or your nearest designated service center.
In Canada, call 1-800-807-6777, or your nearest designated service center.
Call the Whirlpool Customer Interaction Center toll free: 1-800-253-1301.
Our consultants provide assistance with:
Features and specifications on our full line of appliances
Installation information
Use and maintenance procedures
Accessory and repair parts sales
Specialized customer assistance (Spanish speaking, hearing impaired, limited vision, etc.)
Referrals to local dealers, repair parts distributors, and service companies
Whirlpool designated service technicians are trained to fulfill the product warranty and provide after-warranty service anywhere in
the United States. To locate the Whirlpool designated service company in your area,
you can also look in your telephone directory Yellow Pages.
For further assistance
If you need further assistance, you can write to Whirlpool Corporation with any questions or concerns at:
Whirlpool Corporation Customer Interaction Center
553 Benson Road Benton Harbor, M149022-2692
Please include a daytime phone number in your correspondence.
Call the Whirlpool Canada Inc. Customer Interaction Center toll free: 1-800-481-5681 Monday to Friday 8:00 a.m. - 6:00 p.m. (EST). Saturday 8:30 a.m. - 4:30 p.m. (EST).
Our consultants provide assistance with:
Features and specifications on our full line of appliances
Referrals to local dealers
For service in Canada Call 1-800-807-6777. Whirlpool Canada Inc. designated service
technicians are trained to fulfill the product warranty and provide after-warranty service anywhere in Canada.
For further assistance If you need further assistance, you can write to Whirlpool Canada
Inc. with any questions or concerns at:
Customer Interaction Center Whirlpool Canada Inc.
1901 Minnesota Court Mississauga, Ontario L5N 3A7
Please include a daytime phone number in your correspondence.
2O
Loading...
+ 44 hidden pages