Whirlpool GCFP 4824 WH INSTRUCTION FOR USE

QUICK REFERENCE GUIDE

Attention

Please read the operating manual prior to operating the machine for the first time.

GB

1

1

Programme lights

2

Rinse aid level indicator light

3

Salt level indicator light

2

4

LED progress indicator lights

5

Display

6

(-) Button

4

3

How to use your dishwasher:

Open the water tap.
Plug to the mains.
Open the door and load the dishwasher. Check if both upper and lower
spray arms move freely.
Fill enough detergent into the detergent dispenser and close the door.
Use the on / off button to turn the machine on.

Check the salt and rinse aid level indicator lights. If necessary, refill salt
and/or rinse aid.

Use the programme selection button to choose your washing programme.

- The display will show you the duration of the selected programme.

- When there are few dishes, additionally use the Half Load button.

5

710 1211

69 14

13

14

13

7

(+) Button

8

Time pre-selection

9

Key lock

8

10

Programme selection button

11

Start/Pause button

12

Half Load (1/2) button

Start the programme with the start / pause button:

Attention

Avoid opening the door during the washing process. This interrupts the
washing process, and hot steam will escape. When the door is closed, the
programme will continue.

Use the on / off button to turn the machine off again.
When the progress indicator light programme end lights up, the programme
is complete.

Close the water tap.
Pull out the plug.
Allow your dishes to cool for 15 minutes, with the door open.

Unload the dishes. Begin with the lower basket.

Door handle

On/Off button

Programme number

Programme name

Cleaning temperature

Suited to

Degree of dirtiness

Detergents

15 cm³

15-25 cm³

+ 5 cm³

Programme process

Duration (min)

Energy (kWh)

Water (I)

1

Pre-wash

-

Used dishes

which are to be

washed at a later

time

-

-

-

-

Pre-wash

End

15

-

3,4

2

30 Min.

35°C

Dessert and

coffee dishes with

food leftovers
which are not

dried on

Few

x

-

-

35°C wash

Cold rinse

Cold rinse

End

30

0,75

9,6

PROGRAMME TABLE

4

3

Delicate

40°C

Glasses, dessert
and coffee dishes
with food leftovers

which are not

dried on

Few

-

x

-

Pre-wash

40°

wash

Clear rinse

Clear rinse

Dry

End

71

0,80

12,4

Reference **

Normally dirty

dishes with starch

containing food
leftovers which

are not dried on

50°C

medium

-

x

x

Pre-wash

50°

wash

Clear rinse

Clear rinse

Dry

End

170

1,01

12

5

Normal

55°C

Normally dirty

dishes with food

leftovers which

are not dried on

medium

-

x

x

Pre-wash

55°

wash

Clear rinse

Clear rinse

Dry

End

96

1,00

12,4

6

Intensive

70°C

Especially dirty

dishes with food

leftovers which

are dried on

High

-

x

x

50°C

Pre-wash

70°

wash

Cold rinse

Cold rinse

Dry

End

128

1,40

17,2

7

Hygiene+Bio

70°C

Dishes with food

leftovers which

are dried on
especially hard;
dishes which are

to be cleaned

with an unusual

amount of heat

High

-

x

x

50°C

Pre-wash

70°

wash

Cold rinse

Cold rinse

Dry

End

124

1,67

15,4

8

Auto

55°C-65°C

Normally dirty

dishes with food

leftovers which

are dried on

medium to high

-

x

-

The programme

process is adapted

to the degree to

which the dishes

are dirtied

112-130

1,00-1,25

9,6-18,4

The consumption values shown in the table were determined under standard conditions. For this reason, deviations are possible under practical conditions.

** Reference programme for test institutes

The tests in accordance with EN 50242 must be carried out with a full salt container of the water softener, a full reservoir for the rinse aid and the testing programme.
Load capacity : 10

FUNCTION BUTTONS

GB

Function buttons

On/off button

You turn your dishwasher on / off with this button. When turning
on, the indicator light for the last used programme will light up.

Start / Pause button

You use this button to start the selected programme; the light
on the button lights up.
Stop the programme with the start / pause button if you would
like to open the door once the dishwashers washing programme
is running.

Half Load (1/2) button

When there are few dishes, you press this button after pressing
the programme selection button. When turning the dishwasher
on, the indicator light on the button lights up. This function
helps you to save water and energy.

Time pre-selection

The function button for time pre-selection allows you to delay
the start time of the programmes by up to 24 hours.
Use the + and  Buttons to select the desired time.
Press the Start/Pause button.

The display shows you the time remaining until the programme
starts. When the time has expired, the washing process begins.
While the programme is running, the display shows the
remaining time.
The selected programme is shown by the programme light;
the LED progress indicator lights show the active programme
segment.
When the programme is complete, the display shows 00.

Control indicator lights

1

Programme selection

Pre-wash

30 Min.

Delicate

Bio

Normal

Intensive

Hygiene

Auto

2

Rinse aid level indicator light

If this indicator light comes on, you
have to refill rinse aid.
You can also tell whether rinse aid
must be refilled by looking at the rinse
aid dispenser. When the visual fill
indicator is dark, there is enough rinse
aid in the dispenser.
When the colour is light, open the
dispenser and refill rinse aid.

Key Lock

The programme can be locked while your machine is in
operation.

Activate the key lock by pressing the + and  buttons
simultaneously for approx. 3 seconds. The key lock indicator
light will light up.
Repeat the procedure to turn off the key lock.

Attention

The key lock does not lock the door. You only prevent changes
to the set programme.

Programme selection buttons

Use the programme selection button to select the desired
programme. The corresponding programme light lights up.

Programme change

To change a running programme, press the start / pause button:
The programme light turns off.
Select a new programme and start it with the start / pause
button: The respective programme light lights up.

Note

The new programme begins at the point at which you terminated
the former programme.

Cancellation of a programme

Press start/pause button for 5 seconds. The indicator light will
start flashing. The machine will drain the water inside the
machine for 45 seconds. The programme is cancelled when
start/stop indicator light goes off. Then, you can choose and
start a new programme.

3

Salt level indicator light

When this indicator light comes on, you
must refill special salt.
In machines which do not possess an
electrical salt indicator, the salt content

L

A

Z

S

T

L

U

E

Z

S

S

T

A

L

Full

can be read on the container for the salt.
When the visual fill indicator is dark,
there is enough salt in the container.

Empty

L

A

Z

S

T

L

U

E

Z

S

S

T

A

L

When the colour is light, open the
container and add dishwasher salt.

4

LED progress indicator lights

During the washing process, the individual active

Wash

programme segments are shown by the LED
progress indicator lights.

Rinse

Dry

End

Attention

- In the case of the rapid programme, the progress indicator light for drying
does not light up.

- The washing process is only complete when the progress indicator light
programme end lights up.

Attention

- Depending on the length of the terminated programme

- detergent and rinse aid may still be in the dispensers.

17 2492 01 00-025019 496 96700