Whirlpool GBS307PRY03, RBS305PRT02, GBS307PRS03, GBS307PRQ03, RBD305PRS02 Installation Instructions Manual

...

0 (0)

INSTALLATIONINSTRUCTIONS

30" (76.2 CM) ELECTRICSINGLEAND DOUBLE

BUILT-INOVEN

INSTRUCTIONS D'INSTALLATION

FOURI_LECTRIQUEENCASTRI_30" (76,2 CM) -

SIMPLE ETDOUBLE

Table of Contents / Table des mati_res

BUILT*IN OVEN SAFETY ................................. 2

INSTALLATION REQUIREMENTS .................. 3

Tools and Parts ............................................. 3

Location Requirements ................................. 3

Electrical Requirements ................................ 5

INSTALLATION INSTRUCTIONS .................... 5

Prepare Built-In Oven .................................... 5

Make Electrical Connection .......................... 6

Install Oven .................................................... 7

Complete Installation .................................... 8

sr_CURITE DU FOUR ENCASTRE .................. g

EXlGENCES D'INSTALLATION ..................... 10

Outillage et pieces ....................................... 10

Exigences d'emplacement .......................... 10

Sp6cifications electriques ............................ 12

INSTRUCTIONS D'INSTALLATION ............... 12

Preparation du four encastre ....................... 12

Raccordement elect rique ............................ 13

Installation du four ....................................... 15

Achever I'installation .................................... 16

IMPORTANT:

Savefor local electrical inspectoCsuse,

IMPORTANT :

,&,conserver pour consultation par I'inspecteur local des installations electriques.

8303647A

BUILT-INOVEN SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol, This symbol alerts you to potential hazards that can kill or hurt you and others,

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately/ follow instructions,

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

INSTALLATIONREQUIREMENTS

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed

here.

Tools needed

• Phillips screwdriver

• Measuring tape

• Hand or electric drill (for wall cabinet installations)

• 1" (25 mm) drill bit (for wall cabinet installations)

• Level

Parts needed

• UL listed or CSA approved conduit connector

• ULlisted wire connectors

Parts supplied

• # 8-14 x 1" screws - single oven (2), double oven (4)

• Bottom vent (supplied on some models)

• Two # 8-18 x %" screws - bottom vent (supplied on some models)

Check local codes. Check existing electrical supply. See "Electrical Requirements."

It is recommended that all electrical connections be made by a licensed, qualified electrical installer.

Product Dimensions - Single Oven

...... A _--_,l

A. 28%" (72.1 cm) max. recessed width B. 29" (73.7 cm) max. overall height

C. 293/4" (75,6 cm) overafl width D. 23" (58.4 cm) max. recessed depth

E.27W' (69.9 cm) recessed height

Cabinet Dimensions - Single Oven

Single Oven Undereounter (without cooktop installed above)

IMPORTANT: Observe all governing codes and ordinances.

• Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance with oven.

• Recessed installation area must provide complete enclosure around the recessed portion of the oven.

• Grounded electrical supply is required. See "Electrical Requirements" section.

Electrical supply junction box should be located 3" (7.6 cm) maximum below the support surface when the oven is installed in a wall cabinet. A 1" (2.5 cm) minimum diameter

hole should have been drilled inthe right rear or left rear corner of the support surface to pass the appliance cable through to the junction box.

NOTE: For undercounter installation, it is recommended that the junction box be located in the adjacent right or left

cabinet. Ifyou are installing the junction box on rear wall behind oven, the junction box must be recessed and located in the upper or lower right or left corner of the cabinet;

otherwise, the oven will not fit into the cabinet opening.

• Oven support surface must be solid, level and flush with bottom of cabinet cutout. Floor must be able to support a single oven weight of 140 Ibs (63.5 kg) or a double oven

weight of 245 Ibs (111.1 kg).

Undercounter Installation (with cooktop installed above): Ovens approved for this type of installation have anapproval label

located on the top of the oven. Refer to uedercounter installation instructions for cutout dimensions and approved oven cooktop

combinations (separate sheet).

_A_I B

A. 30" (76.2 cm) rain. cabinet width B. 1W' (3.8 cm) min. top of cutout to

underside of countertop C. 5W' (13.3 cm) bottom of cutout to floor D. 28_f/' (72.4 cm) cutout width E. 273/J (70.5 cm) rain. cutout height

Single Oven Installed in Cabinet

_A _

Cabinet Dimensions - Double Oven

Double Oven Installed in Cabinet

_D_

A. 30" (76.2 cm) min. cabinet width B. 1" (2.5 cm) top of cutout to bottom of

upper cabinet door

C. 32" (81.3 cm) bottom of cutout to floor

D. 28V2" (72.4 cm) cutout width E. 1W' (3.8 cm) rain. bottom of cutout to

top of cabinet door

F 273/4" (70.5 cm) rain. cutout height

Product Dimensions - Double Oven

_A_

_D _

, l

A. 30" (76.2 cm) rain. cabinet width B. 1" (2.5 cm) top of cutout to bottom of

upper cabinet door

C. 143/4" (37.5 cm) bottom of cutout to floor D. 28V2" (72.4 cm) cutout width

E. 1V2"(3.8 cm) rain. bottom of cutout to top

of cabinet door

F 493/4" (126.4 cm) rain. cutout height

Cabinet Side View - Double or Single Oven

A. 283/8"(72.1 cm) max. recessed width

B. 51" (129.5 cm) max. overafl height C. 293/4"(75.6 cm) overaft width D. 23" (58.4 cm) max. recessed depth

E.49V2" (125.7 cm) recessed height

E._.

A. 23W' (59.1 cm) rain. cutout depth B. 23" (58.4 cm) recessed oven depth

C. Oven front D. Recessed oven

E. Cabinet

Cabinet filler kits are available from your dealer. Use matching color kit if oven is smaller than your cabinet opening.

Single oven filler height is 3s/16' (8.4 cm) Black - 4378941

White - 4378942 Almond - 4378943

Double oven filler height is 6s_6' (16 cm) Black - 4378947

White - 4378948 Almond - 4378949

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that

the ground path and wire gauge are in accordance with local codes.

Check with a qualified electrical installer if you are not sure the oven is properly grounded.

This oven must be connected to a grounded metal, permanent wiring system.

Be sure that the electrical connection and wire size are adequate and in conformance with the National Electrical Code, ANSI/NFPA 70-latest edition or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. O-M91-1atest edition, and all local codes and ordinances.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, OH 44131-5575

Electrical Connection To properly install your oven, you must determine the type of

electrical connection you will be using and follow the instructions provided for it here.

• Oven must be connected to the proper electrical voltage and frequency as specified on the model/serial number rating

plate. The model/serial number rating plate is located at the bottom of the right-hand mounting rail. See the following

illustration.

Single Oven A. Model/serial number plate

Double Oven

A. Model/serial number plate

• if the house has aluminum wiring follow the procedure below:

1. Connect a section of solid copper wire to the pigtail leads.

2. Connect the aluminum wiring to the added section of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's recommended procedure. Aluminum/copper connection must conform with

local codes and industry accepted wiring practices.

INSTALLATIONINSTRUCTIONS

1. Decide on the final location for the oven. Locate existing

wiring to avoid drilling into or severing wiring during installation.

To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front frame or trim for lifting.

On models with shipping feet attached: To avoid product damage, do not remove the shipping feet at

the front lower corners of the oven. The shipping feet will protect the lower oven trim until the oven is inserted into

cabinet.

3. Remove the shipping materials and tape from the oven.

4. Remove the hardware package from inside the bag containing literature.

Remove and set aside racks and other parts from inside the oven.

Move oven and cardboard close to the oven's final location.

Open the oven door.

Locate the oven door latches in both corners of the oven door, and rotate the latches forward to the unlocked position.

Models rated from 7.3 to 9.6 kW at 240 volts (5.5 to 7.2 kW at 208 volts) require a separate 40-amp circuit. Models rated at 7.2 kW and below at 240 volts (5.4 kW and below at 208 volts) require a separate 30-amp circuit.

• A time-delay fuse or circuit breaker is recommended.

• Connect directly to the fused disconnect (or circuit breaker box) through flexible, armored or nonmetallic sheathed, copper cable (with grounding wire). See "Make Electrical

Connection" section. Flexible cable from the oven should be connected directly to

the junction box. Fuse both sides of the line.

Do not cut the conduit. The length of conduit provided is for serviceability of the oven.

• A UL listed or CSA approved conduit connector must be provided.

A. Oven door latch in locked

position

B. Oven door latch in unlocked

position

IMPORTANT: Use both hands to remove oven doors.

+ 11 hidden pages