Whirlpool FT 338 WH, FL 1348, FT 338 SL, FT 338 BL INSTRUCTION FOR USE

GB FL 1348

This washing machine is equipped with automatic safety functions which detect faults at an early stage and react appropriately, e.g.:

A.“Pump” indicator

B.“Water tap” indicator

Check your washing machine’s water supply.

C

A	B	F
		{
			I
D	E	G H

C. “Door Locked” indicator

As long as a washing programme is running, the lamp lights up to show that the door cannot be opened.

D.“Start” button

E.“Start Delay” button

F.Programme sequence indicator

G.“Spin Speed Reduction” button

H.“Reset” button

I.Selectable programmes

Max.

Detergent and Additives

Selectable special options =

Max.

load

spin

Programme

Care

Type of wash/

Softe-

Main

Pre-

Start

Easy

Pre-

Intensive

Rinse

Speed

speed

Notes

Labels

Degree of soiling

ner

wash

wash

Delay

ironing

wash

Rinse

hold

reduction

Kg

Départ

Repassage

Prélavage

Rinçage

ArrêtCuve

Essorage

rpm

différé

rapide

Intensif

Pleine

Cotton

1-4

Normally to heavily soiled bed linen, table

“Prewash” can be additionally selected for

linen and underwear, towels, shirts etc.

5.0

Yes

1300

Coton

heavily soiled laundry at any temperature.

made of cotton and linen.

Synthetic

Normally soiled blouses, shirts and other

5-7

outer clothing made of polyester (Diolen,

2.5

Yes

1)

1000 1)

“Prewash” can be additionally selected for

Synthétique

Trevira), polyamide (Perlon, Nylon) or

heavily soiled laundry.

mixtures of these fibres with cotton.

Daily Mixed

8-

Slightly to normally soiled textiles made of

3.0

Yes

–

–

1300

In this programme the spin speed should be

Quotidien

cotton and/or synthetic fibres.

adapted to the fabrics.

Rapid wash

9

Hardly worn outer and sport clothing made

–

–

–

–

–

of cotton, polyester, polyamid and mixed

3.0

Yes

1300

Rapide

cotton fabrics.

Delicate

10-11

Curtains and delicate dresses, skirts, shirts

1.5

Yes

–

–

1)

1000 1)

–

Délicat

and blouses.

Wool

12-14

Only woollens with a felt-free finish, labelled

–

–

–

–

1)

1000 1)

If you select “Rinse Hold” do not leave

with the woolmark and identified as

1.0

Yes

Laine

items to soak for too long.

machine washable.

Silk

15

Textiles made of linen, silk, wool or viscose

–

–

–

–

– 2)

– 2)

If you select “Rinse Hold” do not leave items

1.0

Yes

to soak for too long. A very gentle spin is used

Soie

marked as “handwashable”.

in this programme.

This programme only drains (alternative

Drain

A

–

–

–

–

–

–

–

–

–

–

–

–

method of terminating the programme after

“Rinse Hold” without spinning). In addition all

Vidange

running programmes can be cancelled with this

programme.

Gentle spin

B

–

–

–

–

–

–

–

–

–

1)

1000 1)

A very gentle spin is used in this

1.5

programme. Same as the spin cycle in the

Essorage court

“Wool” programme.

Intensive Spin

C

–

–

5.0

–

–

–

–

–

–

–

1300

In this programme spinning is intensive. Same

Essorage

as the spin cycle in the “Cotton” programme.

Rinse + Spin

D

–

–

5.0

–

–

–

–

1300

Same as the spin cycle in the “Cotton”

Rinçage + Essorage

programme.

1) For improved garment care spin speed is restricted to 1000 rpm in this programme.

2) For improved garment care spin speed is zero in this programme.

5019 601 10030

CONSUMPTION DATA

Programme	Temperature	Wash	Water	Energy	Programme duration **
					approx.
	(°C)	(kg)	(l)	(kWh)	(hours : minutes)
Cotton	95	5.0	46***	1.90	2:00
Cotton	60	5.0	48	0.95	2:10
Cotton	40	5.0	48	0.60	2:10
Synthetic	60	2.5	55	0.80	1:35
Synthetic	40	2.5	50	0.50	1:25
Daily Mixed	40	3.0	44	0.45	1:00
Rapid wash	30	3.0	35	0.30	0:30
Delicate	40	1.5	55	0.60	0:45
Wool	40	1.0	55	0.60	0:40
Silk	30	1.0	45	0.30	0:35

*The consumption values were measured in normalized conditions in compliance with Standard EN/IEC 60456.

**The programme duration may also vary from the chart values. The washing machine is able to allow for particular household conditions and to adapt the programme run time accordingly.

***To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

POUR IN DETERGENT, CLOSE THE DOOR AND SELECT A PROGRAMME

Add the detergent as described in the chapter “Detergent and Additives” in the instructions for use.

1.Turn the programme selector knob in any direction to the desired programme.

The light above the “Start” button flashes.

2.The programme sequence indicator and the indicator with the maximum possible spin speed light up.

SELECT SPECIAL OPTIONS -

The corresponding lights go on (if not selectable: rapid flashing for 3 seconds)

“Easy Ironing” button

•To lessen creasing, the water quantity is increased and the clothes are spun very gently at reduced power. This makes your laundry significantly damper at the end of the programme.

“Prewash” button

•Only for heavily soiled laundry (for example sand or granular dirt). Programme duration is increased by some 15 min.

“Intensive Rinse” button

•An additional rinse cycle is carried out.

•This option is particularly suitable for areas with very soft water, washing baby linen and helps people with detergent allergies.

“Rinse Hold” button

•The laundry remains in the last rinse water without being spun: discoloration of the laundry and additional creasing are prevented.

•This option is particularly recommended for the programme “Synthetics” or “Delicates”.

•This function is particularly useful if you want to postpone spinning to a later time.

Note: The programme has reached the “Rinse Hold” when the corresponding light flashes.

Terminate the “Rinse Hold” option:

•Press the “Rinse Hold” button again; the programme will terminate automatically with the appropriate spin cycle for the current programme.

•If you do not wish to spin the clothes, turn the programme selector knob to “Drain” and press the “Start” button again.

“Spin Speed Reduction” button

•A maximum spin speed is assigned to each programme.

•Press the button to set another speed for the spin cycle.

•If no light goes on, the final spin is cancelled. The water is only drained out.

START DELAY

With the “Start Delay function the appliance can be run cheaply e.g. at night, when the electricity is cheaper.

•Press the “Start Delay” button. Select the programme start from 3 to 12 hours ahead by pressing the button again.

•Press the “Start” button.

The Start Delay indicator light flashes until the programme starts.

“Start Delay” correction.

•Before the “Start Delay” has been started: The preset number of hours can be altered by continuously pressing the “Start Delay” button.

By pressing the Start Delay button again after the “12” setting, the time delay can be deleted again or set again.

•After the “Start Delay” has been started:

The preset number of hours can be reduced by pressing the “Start Delay” button again; please note, however, that the washing programme starts IMMEDIATELY, as soon as you activate it again with the Start Delay switch 3 setting. To increase the number of hours preselected, first turn the programme selector switch to the “Off” position. Then set the programme and the additional options again and select the desired number of hours.

PROGRAMME START

After you have selected the programme and the additional option, the indicator light over the “Start” button flashes. Turn on the tap and start the programme by pressing the “Start” button. Now the indicator light above the button goes on.

In addition, all programme phases are indicated by the associated lights. After the end of a programme phase the associated indicator light goes out. Thus the programme sequence indicator moves from left to right across the wash, rinse and spin phases. At the end of the programme only the “End” indicator is still on.

DOOR LOCKED INDICATOR

As long as a washing programme is running, the lamp lights up to show that the door cannot be opened. When the lamp goes off, the door can be opened again. If “Start” has been pressed, but the door is not latched, the “Door locked” indicator flashes for 10 seconds. The door must be pushed shut within this time.

After the 10 seconds, the “Door locked” indicator goes out and the “Start” button flashes. The door must then be opened and closed again and the “Start” button must be pressed.

“TROUBLE” INDICATORS

“Pump”

Waste water is not pumped out. Check wether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

“Water Tap”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

PROGRAMME END

• The “End” indicator goes on.

1.Set the programme selector knob to the “Off” position .

2.Turn off the tap.

3.Open the door and unload the machine.

RESELECT AFTER PROGRAMME START

A newly-selected programme will continue in the same programme section during which the current programme was interrupted. Therefore do not add any more detergent.

1.Press the “Start” button to interrupt the programme. The light flashes.

2.Select the new programme (with temperature), any additional options and - if you wish - another spin speed.

3.Press the “Start” button again to restart the programme.

•If you are in the “Prewash” programme step this additional option can not be deselected as described (to do this see “Cancel (reset) a running programme before the end”).

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

Press the “Reset” button for at least 2 seconds. Any existing water is drained out before the door can be opened.

5019 601 10030