Whirlpool FRBB2VAF20/0 INSTRUCTION FOR USE

0 (0)

31502002GB.fm Page 3 Thursday, April 27, 2006 2:54 PM

INSTRUCTIONS FOR USE

BEFORE USING THE APPLIANCE SAFEGUARDING THE ENVIRONMENT

PRECAUTIONS AND GENERAL RECOMMENDATIONS

HOW TO OPERATE THE REFRIGERATOR/ FREEZER COMPARTMENT

USE OF THE ICE DISPENSER (ON SOME MODELS)

USE OF THE AUTOMATIC ICE MAKER (ON SOME MODELS)

USE OF THE WATER DISPENSER (ON SOME MODELS)

WATER FILTER MONITORING AND REPLACEMENT FUNCTION (ON SOME MODELS)

GUIDE TO INTERNAL COMPONENTS

GUIDE TO STORAGE AND THAWING OF FOOD COMMON ICE MAKER PROBLEMS MAINTENANCE AND CLEANING

VACATION

TROUBLESHOOTING GUIDE / ASSISTANCE AFTER SALES SERVICE

ELECTRICAL CONNECTION

3

Whirlpool FRBB2VAF20/0 INSTRUCTION FOR USE

31502002GB.fm Page 4 Thursday, April 27, 2006 2:54 PM

S A

J Q L C

W

M

T

X

B

Z

K

N

D

Y

O

R U V H F G E

Freezer compartment

S.Automatic ice maker

T.Grids

U.Bottom basket (in some models)

V.Top basket

W.Ice drawer

X.Freezer inner door insert

Y.Freezer inner door door tray

Z.Top inside light (and bottom light only in some

models)

J.Top freezer shelf

K.Freezing zone

Refrigerator compartment

A.Inside light

B.Intermediate light (in some models)

C.Adjustable shelf

D.Drawer lid

E.Crisper

F.Crisper drawer

G.Meat drawer

H.Meat drawer adjustment

L.Compartment

M.Door shelf (with bottle holder only in some models)

N.2-litre door shelf (with bottle holder only in some models)

O.0.75-litre door shelf

Q.Egg tray

R.Water filter (on some models)

4

31502002GB.fm Page 5 Thursday, April 27, 2006 2:54 PM

BEFORE USING THE APPLIANCE

Your new appliance is designed exclusively for domestic use.

For best use of your appliance, carefully read the user’s handbook which contains a description of the appliance and advice on storing and preserving food.

Keep this handbook for future consultation.

1.After unpacking, make sure that the appliance is undamaged and that the door closes perfectly tight. Any damage must be reported to your dealer within 24 hours after delivery of the appliance.

2.Wait at least two hours before switching the appliance on in order to ensure the refrigerant circuit is fully efficient.

3.Installation of the appliance and electrical connections must be carried out by a qualified electrician, in accordance with the manufacturer’s instructions and local safety regulations

4.Clean the inside of the appliance before using it.

SAFEGUARDING THE ENVIRONMENT

1.Packing

The packaging material is 100% recyclable and carries the recycling symbol. Follow local regulations for scrapping. Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of children, as they are potentially dangerous.

2.Scrapping

The appliance is manufactured using recyclable material.

This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By making sure this appliance is disposed of correctly, the user will help prevent potentially negative consequences for the environment and the health of persons.

The symbol on the appliance, or on the accompanying documents, indicates that this appliance should not be treated as domestic waste but must be taken to a suitable collection point for the recycling of electrical and electronic equipment.

Before scrapping, make the appliance unusable by cutting off the power cable and removing the doors and shelves so that children cannot easily climb inside the appliance.

Disposal must be carried out in accordance with local environmental regulations for waste disposal. Deliver the appliance immediately to an authorized dump; do not leave it unattended even for a few days, since it is potentially dangerous for children. For more information regarding the treatment, recovery and recycling of this appliance, contact your local office, the domestic waste collection service or the shop where you purchased the product.

Information:

This appliance does not contain CFC (the refrigerant circuit contains R134a) or HFC (the refrigerant circuit contains R600a) (see the rating plate inside the appliance).

Appliances with Isobutane (R600a): isobutane is a naturally occurring, low

environmental impact gas. Caution is required, however, because isobutane is flammable. Therefore, ensure that the pipelines of the refrigerant circuit do not get damaged.

Declaration of conformity

This appliance is designed to store food and is manufactured in conformity with European Directive 90/128/EEC, 02/72/EEC and Regulation (EC) No. 1935/2004

This product has been designed, manufactured and retailed in compliance with:

-the safety objectives of the Low Voltage Directive 73/23/EEC;

-the protection requirements of the “EMC” Directive 89/336/EEC,

amended by Directive 93/68/EEC.

The electrical safety of the appliance can only be guaranteed if the product is connected to an approved earth connection.

5

31502002GB.fm Page 6 Thursday, April 27, 2006 2:54 PM

PRECAUTIONS AND GENERAL RECOMMENDATIONS

Use the refrigerator compartment only for the storage of fresh food and the freezer compartment only for the storage of frozen food, the freezing of fresh food, and to make ice cubes.

During installation, make sure the appliance does not damage the power cable.

Do not store glass containers with liquids in the freezer since they may burst.

Do not eat ice cubes or ice lollies immediately after taking them out of the freezer since they may cause cold burns.

Before servicing or cleaning the appliance, unplug it from the mains or disconnect the electrical power supply.

Make sure that the appliance is not near a heat source.

Do not store or use petrol, gas or flammable liquids in the vicinity of the appliance or other electrical appliances. The fumes can create a fire hazard or explosion.

To ensure adequate ventilation, leave a space on both sides and above the appliance and follow the installation instructions.

Keep the appliance ventilation openings free.

All appliances equipped with an ice maker or water dispenser must be connected to a mains water supply that delivers potable water only (with water pressure between 1.7 and 8.1 bar (25 and 117 PSI)). Ice makers and/ or water dispensers not directly connected to a mains water supply must be filled with potable water only.

Install and level the appliance on a floor strong enough to take its weight and in an area suitable for its size and use.

For the water connection, use the pipe supplied with the new appliance and do not use that of the previous appliance.

The appliance must be handled and installed by two or more persons.

Place the appliance in a dry and wellventilated place. The appliance is arranged to operate in places where the temperature comes within the following ranges, according to the climatic class indicated on the dataplate: The appliance may not work properly if it is left for a long period at a temperature above or below the indicated range.

Climatic Class

Amb. T. (°C)

Amb. T. (°F)

SN

From 10 to 32

From 50 to 90

 

 

 

N

From 16 to 32

From 61 to 90

 

 

 

ST

From 18 to 38

From 64 to 100

T

From 18 to 43

From 64 to 110

 

 

 

Be careful not to damage the floors when you move the appliance (e.g. parquet flooring).

Do not use mechanical, electric or chemical means other than those recommended by the Manufacturer to speed up the defrost process.

Do not damage the refrigerator’s refrigerant circuit pipes.

Do not use or place electrical appliances inside the compartments if they are not of the type expressly authorised by the Manufacturer.

This appliance is not designed for use by young children or the infirm without supervision.

To avoid the risk of children being trapped and therefore suffocating, do not allow them to play or hide inside the appliance.

Power cable modification or replacement must only be carried out by qualified personnel.

Do not use single/multiple adapters or extension cables.

It must be possible to disconnect the appliance from the mains by unplugging it or by means of a two-pole switch fitted upline of the socket.

Ensure that the voltage indicated on the appliance data plate corresponds to the domestic supply voltage

Do not swallow the contents (non-toxic) of the ice packs (if provided).

The Manufacturer declines any liability if the above recommendations and precautions are not respected.

6

31502002GB.fm Page 7 Thursday, April 27, 2006 2:54 PM

Functions and settings for the freezer compartment

Freezer and/or refrigerator compartment door open

Freezer compartment temperature setting

Fast freeze function

Functions and settings for the refrigerator compartment

Refrigerator compartment temperature setting

Fast cooling function

Vacation function

Appliance, alarm and malfunction symbols

Control panel locked

Alarm symbol, generally in association with an acoustic alarm

Acoustic alarm reset button

Functions and settings for the ice maker and water filter

Selection of ice cubes or crushed ice

Indicates the state of the water filter

7

31502002GB.fm Page 8 Thursday, April 27, 2006 2:54 PM

HOW TO OPERATE THE REFRIGERATOR/ FREEZER COMPARTMENT

Connect the appliance to the mains water and power supply (see the Installation manual).

When the appliance is connected to the power supply, the freezer display shows two hyphens until the optimum temperature is reached, whereas the refrigerator display shows a temperature of +5°C (factory-set).

When the appliance is warm, the red alarm LED will blink and the acoustic alarm will sound, indicating that the appliance has not yet reached the optimal temperature for storage of foodstuffs.

Press the Reset button to deactivate the acoustic alarm.

The red light will stop flashing when the freezer compartment reaches a suitable temperature for preserving food. At this point food can be loaded into the freezer compartment.

After being switched on, the refrigerator needs 2/3 hours to reach the correct temperature to store a typical volume of food in the refrigerator compartment.

IMPORTANT:

If food is placed in the refrigerator before the appliance has reached a suitable temperature for storing food, it may deteriorate.

Turning the refrigerator and freezer controls to a cooler than recommended setting will not cool the compartments any faster.

Do not place food near the air vents in the refrigerator compartment.

A built-in exterior moisture control continuously guards against moisture build-up on the front edges; Do not be alarmed if these edges sometimes feel warm to the touch.

The inside light comes on when any door is opened.

8

31502002GB.fm Page 9 Thursday, April 27, 2006 2:54 PM

Guide to selecting functions

Standby

This function turns off both the refrigerator and freezer compartments. To activate the standby function, press the button .

Two green dots will appear on both displays, indicating that the appliance is on standby. To reactivate the appliance carry out the same procedure until the previously set temperatures are displayed. When the appliance is on standby the light inside the refrigerator compartment is off.

Remember that this operation does not disconnect the appliance from the power supply.

Freezer compartment temperature

Shows the freezer compartment temperature setting.

The set temperature is stored and will automatically be restored even after a power failure or if the appliance is switched off by pressing the standby button.

Freezer compartment temperature selection and control

To change the internal temperature press buttons until the desired value is reached and shown on the display.

Fast freezing

This function must be activated before freezing fresh food. To activate the function press the specific button (yellow LED lights up). The function switches off automatically after 24 hours or manually by pressing the button again.

When the function is activated, bring the sliding shutter to the “closed” position, shifting the slider all the way to the left.

Refrigerator compartment temperature

Shows the freezer compartment temperature setting.

The set temperature is stored and will automatically be restored even after a power failure or if the appliance is switched off by pressing the standby button.

Refrigerator compartment temperature selection and control

To change the internal temperature press buttons until the desired value is reached and shown on the display.

Fast cooling

Switches on and displays the status of the “Fast Cooling” function which is used to rapidly chill fresh food placed in the refrigerator compartment. The function switches on when the button (yellow LED) lights up and switches off automatically after 6 hours or manually by pressing the button again.

Vacation

This function turns off the refrigerator compartment if you are going away for some time. To activate the function press button (yellow LED lights up).

The temperature disappears from the display and a green dot appears. To turn on the refrigerator compartment, press button again .

Important:

After activating this function remove perishable food from the refrigerator compartment and keep the door closed, so that the refrigerator maintains an adequate temperature preventing the formation of odours.

Control panel lock function

This function prevents anyone from inadvertently changing settings or switching off the appliance. To activate keypad Lockout, press the fast freeze button on the left side of the control panel and the fast cooling button on the right side of the control panel together for about 3 seconds until the yellow light comes on and an acoustic signal sounds.

To unlock the control panel, carry out the same operation until the yellow LED turns off.

9

Loading...
+ 15 hidden pages