Whirlpool FL 5064/6 INSTRUCTION FOR USE

GB FL 5064/6 PROGRAMME CHART
Cotton Synthetic
Delicate/Wool
On/Off
Intensive Rinse No Spin Rinse Hold Gentle Wash
0 3h. 6h.
Estimated Programme Duration refer to maximum programme temperature selection without special options.
During the selected washing programme the programme selector knob moves by steps clockwise through the phases
wash, rinse and spin
. Each step takes from some
prewash, main
seconds to several minutes.
: optional / Yes : dosing required
Programme
Selector
Knob
1
2
3 4 4 5
6
A B C D
E
Programme
Cotton
with prewash
Cotton/
Antibacterial
Synthetic
Cotton
short
Synthetic
short
Delicate
Wool
Rinse +
Long spin Long spin
Rinse +
Short spin Short spin
Drain
Tem pe ra tu re
Selector
Min Max. 95°
Min Max. 95°
Min Max. 60°
Min Max. 40°
Min Max. 40°
Min Max. 40°
Min Max. 40°
Min
Min
— —
Typ e o f w as h/Notes
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.made of cotton and linen. Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of your laundry . The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.
Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Slightly soiled bed linen, table linen and underwear , towels, shirts etc. made of cotton and linen.
Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses. Only woollens with a felt-free finish, labelled with the woolmark and identified as
machine washable.
If you select “Rinse Hold” do not leave items to soak for too long. With this programme you can add starch and/or fabric softener.
The programme ends with an intensive spin cycle. In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Drain only - no spinning. Alternative method of terminating the synthetic, delicate and wool programme and for premature removal of the laundry.
Max
Load
Kg
5.0
5.0
2.0
2.5
2.0
1.5
1.0
5.0
5.0
1.5
1.5
Detergents and additives Special options Spin
Pre-
Main
Fabric
wash
Wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
——
Softener
Chlorine
❉❉❉❉❉❉
❉❉❉❉❉❉
Intensive
Bleach
Rinse
❉❉❉❉
❉❉❉❉
❉❉❉❉
——
——
——
No
Rinse
Spin
Hold
❉❉
——
❉❉
Gentle
Wash
— ———— — ——— ——
——
❉❉
— ———— — ———
Speed
rpm
600 120
600 110
600 85
600 75
600 75
600 70
600 60
600 20 600 15 600 15 600 10
————— — ————
Estimated
Programme
Duration
Min.
6
Whirlpool is a registered trademark of Whirlpool USA
5019 301 10315
CONSUMPTION DATA
Programme
Temperature
Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Estimated Programme
Duration
Min.
Cotton with prewash 95 5.0 80 2.00 120
Cotton/Antibacterial 95 5.0 59 1.80 110
Cotton 60 5.0 59 1.20 110
Synthetics 60 2.0 60 0.90 85
Cotton short 40 2.5 65 0.70 75
Synthetics short 40 2.5 60 0.60 75
Delicate 40 1.5 80 0.60 70
Wool 40 1.0 80 0.60 65
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. The data on the energy label refer to the programme Cotton 60°C.
ADD DETERGENTS, CLOSE THE DOOR
SELECT ANY DESIDERED OPTION
AND SELECT THE PROGRAMME
Add the detergents as described in the programme table or in the chapter “Detergents and Additives” in the booklet.
1. Open the tap.
2. Set the
programme selector
to the desired
programme.
3. Set the
temperature selector
to the desired
temperature.
4.
Special options
can be selected.
5. Check that the door is well closed and turn on the washing machine by pressing the
button. The indicator lights up, indicating
OFF”
“ON/
that the washing machine is on.
“Intensive Rinse” button
• The water level increases for improved rinsing efficiency.
• This option is particularly suitable for areas with very soft water when washing baby linen and helps people with skin allergies.
• For improved garment care it is advised to use the option for the Cotton 95°C and the Coloured 60°C programme.
“No Spin” button
• Excludes spinning from programme, press button. Suitable for delicate laundry.
with the “Cotton” and “Synthetic”
Note:
programmes a short spin cycle is provided in any case, even if the exclusion has been selected, in order to optimize rinsing results.
“Rinse Hold” button
• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.
• This option is particularly recommended for the programme “Synthetic” or “Delicate”.
• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the programme will terminate automatically with the final spin cycle for the present wash programme.
If you do not wish to spin the laundry , turn the programme selector knob to the “Drain” programme.
“Gentle Wash” button
• Reduces the mechanical wash strenght from strong to delicate.
PROGRAMME CHANGE
To reselect a programme when a cycle has already started:
1. Switch off the appliance by pressing the “
” button.
OFF
ON/
2. Select the new programme, temperature and
options.
3. Start the programme by pressing the “
” button again.
OFF
ON/
PROGRAMME END
1. At the end of the programme the programme
selector moves to the stop position.
2. To unload the washing machine wait for the
door to unlock (about 2 minutes).
3. Switch off the washing machine, open the
door and take out the laundry.
4. Close the tap and leave the door ajar to allow
the drum to dry out.
NOTES AND INDICATIONS FOR USE
Water level
To obtain low water consumption without compromising washing results the water level within the drum may not be visible.
Cleaning the pump filter
A regular filter check and eventual cleaning is advisable.
Washing cycle
During the washing cycle the turning of the drum is stopped several times for optimization of energy consumption.
Increased spinning efficiency
During spinning the drum starts and stops turning several times: in this way the washing machine performs spinning with increased efficiency.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 10315
Loading...