Whirlpool FL 242/WP, FL 242/1 WP PROGRAM CHART

GB FL 242

PROGRAMME TABLE

Cotton

Half load

Synthetic

Rinse hold

Delicate/Wool

On/Off

	Programme		Type of textiles / Degree of soiling				Max.					Detergent and Additives													Special								Tempe-		Programme
							Load																	functions that									rature		selector
																								can be selected									Selector			knob
																																		°C
										Pre-			Wash			Fabric			Chlorine					Half				Rinse
										wash						Softener			bleach					Load				Hold
							kg
		Cotton	Heavily soiled, long wearing and temperature stable textiles in cotton and																															Min.
1			linen (bed linen, table linen, underwear, shirts etc).				5,0							Yes																					1
		with pre-wash																																to 95
			The max load for heavily soiled laundry is 3,5 kg.
			Averagely soiled, long wearing and temperature stable textiles in cotton and																															Min.
2		Cotton	linen (bed linen, table linen, underwear, shirts etc).				5,0				—		Yes																						2
																																		to 95
			The max load for heavily soiled laundry is 3,5 kg.
3		Synthetic	Averagely soiled textils in cotton, linen, polyester (Diolen, Trevira);				2,0				—		Yes							—														Min.	3
			polyamide (Perlon, Nylon), other synthetics or similar blends.																															to 60
4		Cotton short	Lightly soiled textils in cotton, linen, polyester (Diolen, Trevira);				2,5				—		Yes							—														Min.	4
		Synthetic short	polyamide (Perlon, Nylon), other synthetics or similar blends.				2,0																											to 40
5		Delicate	Curtains and delicate synthetic textiles (dresses, skirts and blouses etc).				1,5				—		Yes							—				—										Min.	5
																																		to 40
6		Wool	Only machine washable woollens with pure new wool label.				1,0				—		Yes							—				—				No						Min.	6
																																		to 40
A		Rinse and	With this programme you can add fabric softener or starch.				5,0				—		—							—														Min.			A
		Long spin	The programme ends with a long spin cycle.
B		Long spin	This programme provides a long spin cycle, the same as the spin				5,0				—		—			—			—				—			—					—						B
			cycle in the Cotton programme.
C		Rinse and	With this programme you can add fabric softener or starch.				1,5				—		—							—				—										Min.			C
		short Spin	The programme ends with a short spin cycle.
D		Short Spin	This programme provides a short spin cycle, the same as the spin				1,5				—		—			—			—				—			—					—						D
			cycle in the Wool programme.
E		Draining	Drain only, without spin, e.g to unload the laundry earlier.				—			—			—			—			—			—				—					—						E

GB

CONSUMPTION DATA

Programme		Water	Energy	Programme
				duration
		(l)	(kWh)	(min.)
Cotton 95° C	1	80	2,00	120
with pre-wash
Cotton 95° C	2	70	1,80	110
Cotton 60° C	2	70	1,20	110
Synthetic 60° C	3	60	0,90	85
Cotton short 40° C	4	65	0,70	75
Synthetic 40° C		60	0,60	75
Delicate 40° C	5	80	0,60	70
Wool 40° C	6	80	0,60	65

PROGRAMME START

1.Plug in the appliance.

2.Turn on the water supply tap.

3.Press the “ON/OFF” button.

DOOR LOCK

The door locks automatically after the programme start until the end of the programme.

SELECTING THE PROGRAMME

1.Turn the programme selector knob clockwise to the desired programme.

2.Set the temperature knob to the desired temperature.

PRESS THE DESIRED SPECIAL OPTION BUTTON

“Lightly soiled / Half load” button

•Reduces water consumption, above all during the rinse.

•Especially suitable for lightly soiled or small loads (reduce the detergent quantity).

“Rinse hold / Spin delay” button

•The laundry remains in the last rinse water without being spun, to avoid heavy creasing.

•Especially suitable for the “Synthetic” or “Delicate” programmes, if the laundry is not to be unloaded immediately after the end of the programme.

Stopping “Rinse hold”

•Press the “Rinse hold” button again; the load will be spun according to the selected programme.

PROGRAMME END

•The programme sequence indicator is at “Stop”.

1.Press the “ON/OFF” button.

2.Cancel the special options by pressing the appropriate buttons.

3.Turn the water supply tap(s) off.

4.Wait for the door to unlock (about 2 minutes).

5.Open the door and unload the machine.

Note: Do not fully close the door but leave it ajar to allow the drum to dry out.

PROGRAMME RESELECTION

1.Press the “ON/OFF” button.

2.Select the new programme, temperature and relative options.

3.Press the “ON/OFF” button.

5019 100 00030