- Models: FGP315E, FGP325E, FGP335E
- Warranty: Full one year limited warranty on FSP® replacement parts and labor.
- Safety features: Anti tip bracket and electric ignitors for the surface burners
- Vent for hot air circulation around the oven
- Control board with surface burner markers
- Clock and minute timer (applicable model is FGP335E)
- Oven burner designed to light automatically and has a 50-60 second delayed response.
- Positions of racks that have been found useful for various cooking needs.
- Settings for surface burner heat from HIGH through LOW.
- Cook top that lifts up to facilitate access to the burners.
- Broiler is located beneath the oven door.
- Cleaning chart with such instructions for the proper maintenance of different parts of the range.
Q: How should I go about lighting the surface burners?
A: For surface burners, press the control knob inwards and turn it counterclockwise until it reaches the LIGHT position. You should hear a clicking sound while the ignition materials heat up. Take account that all burners have been lighted and turn the knob to the cook setting you wish.
Q: When the flames on the burner are yellow, what should I do?
A: Burner flames that are yellow are a sign of unburnt gasses that burnt. Kindly report to your authorized service technician to inspect and adjust the air/gas mixture.
Q: Is it ok to use aluminum foil to line the oven?
A: NO: It is not advisable to place aluminum foil around the burners, the bottom of the oven or any other area of the range.
Q: How can I change the control of the oven temperature?
A: In lower cases where one needs to change the control of the knob, then lift the oven temperature knob, after which the notches inside it can be adjusted. The notches assist in raising or lowering the temperature with each notch being almost equal to 5°F.
Q: I wanted to know if this range comes with any warranty.
A: As has been stated, under the condition that the range is adequately serviced by a qualified professional, then an all-inclusive warranty of one year is issued against any sort of default in material or work performed.
Q: In the instance where I might have problems in igniting the oven burner, what should I do?
A: In most cases where turning the oven ignitor is needed then the knob should be turned to the temperature setting, and the gas shutoff valve positioned at ON is a must. If problems still continue, then a qualified technician should be contacted.
Loading...