Whirlpool EV 1025 INSTRUCTION FOR USE

EV 1025

Programme Type of wash / Notes

Prélavage

Cotton with Prewash

Coton

Cotton

Couleur

Coloured

Rapide

Quick Wash

Synthétique

Synthetics

Rinçage

Rinse + Spin

Essorage

Spin

Délicat

Delicate

Laine

Wool

Rinçage

Rinse + Spin

Essorage

Spin

Vidange

Drain

Heavily soiled sheets, tablecloths, underclothes, shirts etc. in hard wearing and high temperature resistant cotton.

The maximum load for heavily soiled washing is 3.5 kg.

Moderately soiled sheets, tablecloths, underclothes, towels etc. in hard wearing and high temperature resistant cotton.

Averagely soiled blouses, shirts etc. made of polyester (Diolen, Trevira); polyamide (Perlon, Nylon), or cotton blends.

Blouses, shirts, cotton blouses, dark coloured terry towelling, jeans, etc. lightly soiled. Lightly soiled shirts, blouses etc., made of polyester (Diolen, Trevira), polyamide

(Perlon, Nylon) or cotton blends. This programme allows starch or softener to be added.

It is followed by an intensive spin cycle. Programme for intensive spin cycle.

Delicate fabrics and curtains (dresses, skirts, shirts, blouses, etc.). Machine washable woollens with pure new wool label.

If the “Rinse Hold” option is selected don't leave the wash to soak for too long. This programme allows starch or softener to be added.

It is followed by a gentle spin cycle. Programme for gentle spin cycle. Drain only, without spin cycle.

Alternative way to end programmes after a “Rinse Hold”.

Froid “Cold” Marche/Arrêt “On/Off”

Max. load

Pre-

wash

5.0 Yes

5.0

2.0

5.0

2.0

5.0

1.5

1.0

1.5

——

—

Programme duration figures (guideline) are valid for maximum temperature wash with no special functions.

❉

: option / Yes: dosing required

Do not use liquid detergents.

For improved garment care spin speed is restricted to 500 rpm in this programme.

For improved garment care spin speed is restricted to 400 rpm in this programme.

Detergents and additives Options Temperature Selector°CMaximum

Main

Wash

Yes

—

———— —

Yes

—

———— — —

———— — — —

Softener Bleach Rinçage

Intensif

Intensive

Rinse

Arret cuve

pleine

Rinse Hold

❉❉❉ ❉

❉❉❉ ❉ ❉ ❉ ❉ ❉

❉ ❉ ❉

—

❉❉ ❉❉ ❉❉

—

——

—

❉

from “

from

from “

to 90 1000 130

Froid”

to 90 1000 115

Froid”

to 60 1000 100

“Froid”

to 40 1000 85

Froid”

to 40 500

Froid”

“Froid”

—100015

from “

to 40 400

Froid”

to 30 400

Froid”

“Froid”

Spin

Speed

rpm

Programme

time

approx.

1000 20

400

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

5019 612 10028

ENERGY AND WATER CONSUMPTION DATA

Programme Temperature

Load

Water

Energy

Programme time

(°C)

(kg)

(l)

(kWh)

(min)

Cotton + Intens. Rinse 90 5.0 72 1.80 115

Cotton 60 5.0 64 1.20 115 Coloured 60 2.0 56 0.80 100 Coloured 40 2.0 56 0.40 100

Quick Wash 40 2.5 54 0.50 85

Synthetics 40 2.0 54 0.40 70

Delicate 40 1.5 70 0.65 55

Wool 40 1.0 70 0.55 45

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. The data on the “Energy Label” refer to the programme “Cotton 60°C”. * The remaining time indicator can similarly deviate from the values in the table, because it takes into account the household

conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains

the water out.

PREPARATION OF WASH CYCLE PRESS ANY DESIRED OPTION BUTTON(S)

1. Close the drum flaps and check that they are properly locked.

2. Add detergents and additives into the dispenser to no more then the “MAX” level mark, as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

• Stain remover agents

• Anti-scale agents (if necessary)

3. Turn the programme selector knob clockwise to the desired programme.

4. Turn the temperature knob to the required temperature.

5. Turn the spin speed knob to the required spin speed.

“Intensive Rinse” button (

• The water level increases for improved rinsing efficiency.

• This option is particularly suitable for areas with very soft water when washing baby linen and helps people with skin allergies.

• For improved garment care it is advised to use the option for the Cotton 90° C and the Coloured 60° C programme.

“Rinse Hold” button

• The laundry remains in the last rinse water, without progressing to the spin cycle to avoid creasing and prevent colours from changing.

• This option is especially recommended for the “Synthetics” or “Delicate” programmes.

• This option is perfectly suitable if you wish to postpone the spin or you don't wish to spin the clothes.

Note: the programme selector stops on “ ”.

Rinçage Intensif)

(Arrêt Cuve Pleine)

Terminate the “Rinse Hold” option.

• Press the “Rinse Hold” button again; the programme will terminate automatically with the spin cycle corresponding to the previously selected wash programme.

• If you do not wish to spin the clothes, switch off the appliance by pressing the “On/Off” button. The pilot light goes out. Turn the programme selector to the “Drain” position and switch on the appliance.

PROGRAMME START

Open the water inlet tap and press the “On/Off” button. The pilot lamp lights up.

DOOR LOCK

During the running programme, the door cannot be opened. The door locks automatically in all programmes. If the programme is stopped or if an electrical power failure occurs, the door unlocks automatically after about 1 minute.

PROGRAMME END

• The programme selector knob is at “STOP”,

the pilot lamp lights.

1. Press the “On/Off” button. The pilot light goes

out.

2. Cancel the options by pressing the appropriate

buttons.

3. Turn the water supply tap off.

4. Wait for the door to unlock (about 1 minute).

5. Open the door and the drum flaps and unload

the machine.

SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER PROGRAMME START

1. Press the “On/Off” button to switch off the

appliance. The pilot light goes out.

2. Select the new programme, temperature, spin

speed and options.

3. Press the “On/Off” button to switch on the

appliance. The pilot light lights.

TO STOP, RESET A PROGRAMME BEFORE THE END

1. Press the “On/Off” button to switch off the appliance. The pilot light goes out.

2. Set the programme selector on “Drain”.

3. Press the “On/Off” button to start the “Drain” programme. Only open the door when the programme selector is at “STOP” and the door is unlocked (after approximately 1 minute).

NOTES AND INDICATIONS FOR USE

• After switching your washing machine on, it

does not start immediately: it needs some seconds in order to lock the door, fill water and then drum starts turning.

• Spinning has an interrupted start-up: the drum starts

and stops running several times, to improve spin efficiency and to better balance the laundry.

• At the end of the spinning cycle the drum goes

on reversing for some minutes: this helps you unloading the laundry.

• Do not exceed in detergents dosage: excessive

foam formation may prevent spinning.

• Your imbalance detection and correction

system reduces spin speed or interrupts the spin automatically in case of imbalance load – see “Troubleshooting guide”.

• Your machine has a new, electronically-controlled

motor: don’t be surprised by its sound.

• If you want to change the programme during

the wash cycle, remember to switch the machine off before turning the programme selector knob.

5019 612 10028