Whirlpool DU1345XTVQ5, DU1345XTVQ4, DU1345XTVQ2, DU1345XTVQ1, DU1345XTVQ0 Owner’s Manual

THANK YOU for purchasing this high-quality product. Ifyou should experience a problem not covered in TROUBLESHOOTING,

please visit our website at vvww.whirlpool,com for additional information. Ifyou still need assistance, call us at 1-800-253-1301. In
Canada, visit our website at www.whirlpool.ca or call us at 1-800-807-6777.

You will need your model and serial number located nearthe door on the right-hand or left-hand side of the dishwasher interior.

Para obtener acceso alas "lnstrucciones para el usuario de lalavavajillas" en espar_ol,o para obtener informaci6n adicional acerca
de su producto, visite: www.whirlpool.com

Tenga listo su nOmero de modelo completo. Puede encontrar su nOmero de modelo y de serie en la etiqueta ubicada cerca de la

puerta al lado derecho o izquierdo del interior de la lavavajillas.

Your safety and the safety of others are very important.

We have provided many important safety messages in this Quick Reference Guide and on your appliance Always read and obey
all safety messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't i_
follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using the dishwasher, follow basic precautions, including the following:

• Read all instructions before using the dishwasher. • Do not tamper with controls.

• Use the dishwasher only for its intended function.

• Use only detergents or rinse agents recommended for use in
a dishwasher, and keep them out of the reach of children.

• When loading items to be washed:

1) Locate sharp items so that they are not likely to damage
the door seal; and

2) Load sharp knives with the handles up to reduce the risk
of cut-type injuries.

• Do not wash plastic items unless they are marked
"dishwasher safe" or the equivalent. For plastic items not so

marked, check the manufacturer's recommendations.

• Do not touch the heating element during or immediately after
use.

• Do not operate the dishwasher unless all enclosure panels

are properly in place.

Do not abuse, sit on, or stand on the door, lid, or dish racks
of the dishwasher.

To reduce the risk of injury, do not allow children to play in
or on the dishwasher.

Under certain conditions, hydrogen gas may be produced in
a hot water system that has not been used for two weeks or

more. HYDROGEN GAS IS EXPLOSIVE. if the hot water
system has not been used for such a period, before using

the dishwasher turn on all hot water faucets and let the
water flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.

Remove the door or lid to the washing compartment
when removing an old dishwasher from service or
discarding it.

SAVE THESE INSTRUCTIONS

W10130986A

GROUNDING INSTRUCTIONS

• For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a

malfunction or breakdown, grounding will reduce the risk of

electric shock by providing a path of least resistance for
electric current. The dishwasher is equipped with a cord

having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet

that is installed and grounded in accordance with all local
codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

SAVE THESE INSTRUCTIONS

Check with a qualified electrician or service representative
if you are in doubt whether the dishwasher is properly

grounded. Do not modify the plug provided with the
dishwasher; if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.

For a permanently connected dishwasher:
The dishwasher must be connected to a grounded metal,

permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on
the dishwasher.

_! Prepare and load

dishwasher.

for cleaning and

rinse aid for

drying .... ..

2Add detergent _

Prepare and Load the Dishwasher
IMPORTANT: Remove leftover food, bones, toothpicks and other

hard items from the dishes. Remove labels from containers before

washing.

Upper rack Lower rack

_ Select a cycle and option.

© O O O O O O O O

C¥_[[S OPTIOt_S

00000 0000

POTS_ ,_ORMA_ LIGHT GM_$ RINS_ SOAK& _EI-TEMp 5A_JI !4EATE9

pt,N5 XF_$5 0NL_ _j3U R WAS£ _INS_ bRY

, dishwasher.

Start

STA_

RESUrgE

Make sure nothing keeps spray arm(s) from

spinning freely, it is important for the water
spray to reach all soiled surfaces.

• Make sure that when the dishwasher door is closed no items
are blocking the detergent dispenser.

• Items should be loaded with soiled surfaces facing down and
inward to the spray as shown. This will improve cleaning and
drying results.

• Avoid overlapping items like bowls or plates that may trap food.

• Place plastics, small plates and glasses in the upper rack.
Wash only plastic items marked "dishwasher safe."

• To avoid thumping/clattering noises during operation: Load
dishes so they do not touch one another. Make sure lightweight

load items are secured in the racks.

2

When loading silverware, always place sharp
items pointing down and avoid "nesting" as

shown.

Dispenser with one lid - To add
rinse aid, turn the dispenser
cap to "Refill" and lift off. Pour
rinse aid into the opening until

the indicator level is at "Full."
Replace the dispenser cap and

turn to "Lock." Make sure cap
is fully locked.

or

RefiEIc::__Q

Lock

¼ turn

to lock

Add Detergent

NOTE: If you do not plan to run a wash cycle soon, run a rinse

cycle. Do not use detergent.

• Use automatic dishwasher detergent only. Add powder, liquid
or tablet detergent just before starting a cycle.

• Fresh automatic
dishwasher detergent

results in better

cleaning. Store tightly

closed detergent B
container in a cool,

dry place.

• The amount of detergent to use depends on:
How much soil remains on the items - Heavily soiled loads

require more detergent.

The hardness of the water - If you use too little in hard water,

dishes won't be clean. If you use too much in soft water,
glassware will etch.

Soft to Medium Water (0-6 grains per U.S. gallon)
[typical water softener water and some city water]

Medium to Hard Water (7-12 grains per U.S. gallon)
[well water and some city water]

• Depending on your water hardness, fill the Main Wash section
of the dispenser as shown. Fill the Pre-Wash section to the
level shown, if needed.

NOTE: Fill amounts shown
are for standard powdered

detergent. Follow
instructions on the package

when using other

dishwasher detergent.

A

A. Cover latch
B. Main Wash section

C. Pro-Wash section

MalnWash Pro-Wash

Add Rinse Aid

Your dishwasher is designed to use rinse aid for good drying

performance. Without rinse aid your dishes and dishwasher
interior will have excessive moisture. The heat dry option will
not perform as well without rinse aid.

Rinse aid keeps water from forming
droplets that can dry as spots or streaks.

They also improve drying by allowing
water to drain off of the dishes after the

final rinse.

Rinse aid helps to reduce excess
moisture on the dish racks and interior of

your dishwasher.
Check the rinse aid indicator. Add rinse aid when indicator

drops to "Add" level or, when rinse aid indicator looks light. The
light visual indicator means to add rinse aid, and the dark visual

indicator means that there is sufficient rinse aid in the
dishwasher.

@

Dispenser with two lids - To add rinse
aid, press "A" to open the cover. Fill

the dispenser with rinse aid up to the

dotted line. Close the cover.

NOTE: For most water conditions, the
factory setting of 2 will give good results.

If you have hard water or notice rings or
spots, try a higher setting. Turn the arrow

adjuster inside the dispenser by either
using your fingers or inserting a flat-blade
screwdriver into the center of the arrow

and turning.

Select a Cycle (cycles vary by model)

NOTE: Heavier cycles and options affect cycle length. Some
cycles and options will take up to 31/2hours to complete.

Pots & Pans - Use for heavily c Yc _Es
soiled, hard-to-clean items. ® ® ® o o

Normal-UsefornormalfoodsoiL O O O O O
The energy usage label is based on PoTs& r_0£MALtl6_r GUiSS£1_S_

this cycle. _N_ xp_s_ ONLY
Light - Use for lightly soiled items or china and crystal.

Glass XPress TM - Use to quickly wash prerinsed glasses or dish
loads

Rinse Only - (no options apply to this cycle) Do not use detergent.
This is only a rinse that keeps food from drying on your dishes and

reduces odor buildup in your dishwasher until you are ready to
wash a full load.

Select Options (options vary by model)

You can customize your cycles by 0PT_0 Ns
pressing the options desired, o ® ® o

Soak&Scour- usetopresoakyour 0 0 0 0 _
dishes for 4 hours in your dishwasher s0_<_ HI-T£MP_ANI I_£ATED

instead of presoaking them in the sink. scc_, WASHRINSE _*Y
Hi-Temp Wash - (use only with Pots &

Pans and Normal wash cycles) heats the water during the wash
portions of the cycle.

Sani Rinse - (use only with Normal wash cycle; automatic with
Heavy Duty cycle) Select this option to raise the water temperature

in the final rinse to approximately 155°F (68°C). Sani Rinse option
adds heat and time to the cycle. This high temperature rinse

sanitizes your dishes and glassware in accordance with NSF/ANSI
Standard 184 for Residential Dishwashers. Certified residential

dishwashers are not intended for licensed food establishments.
Heated Dry - (automatic with all except rinse cycle and ) use for

best drying results. Turn off by pressing Heat Dry so that the light
goes off.

Delay Start - (any cycle) offers the choice to start the _ _
dishwasher automatically at a later time. Select a wash

cycle and options. Press Delay until reaching the desired
hour for Delay to start. Press START/RESUME. Close the

door firmly. D_LA_

Lock-(onHeatDrybutton)usetoavoidunintendeduseofyour
dishwasher.WhenControlLockislit,allbuttonsaredisabled.The

dishwasherdoorcanbeopenedwhilethecontrolsarelocked.

ToturnonLock:

PressandholdHeatDryforatleast4seconds.TheLockedlight

glows.Ifyoupressanypadwhileyourdishwasherislocked,the

lightflashes3times.

ToturnoffLock:

PressandholdHeatDryforatleast4seconds.TheControlLock
lightturnsoff.

Start or Resume a Cycle

• Run hot water at the sink nearest your dishwasher until

the water is hot. Turn off water.

©

©

START/

f_tJM_

Cleaning the Dishwasher
Clean the exterior of the dishwasher with a soft, damp cloth and

mild detergent. Ifyour dishwasher has a stainless steel exterior, a

stainless steel cleaner is recommended - Stainless Steel Cleaner

and Polish Part Number 31464.

Clean the interior of the dishwasher, with a paste of powdered

dishwasher detergent and water or use liquid dishwasher detergent
on a damp sponge to clean the cooled-down interior.

A white vinegar rinse may remove white spots and film. Vinegar is

an acid, and using it too often could damage your dishwasher.
Put 2 cups (500 mL) white vinegar in a glass or dishwasher-safe

measuring cup on the bottom rack. Run the dishwasher through a

complete washing cycle using an air-dry or an energy-saving dry

option. Do not use detergent. Vinegar will mix with the wash water.

Pushdoorfirmlyclosed.Thedoorlatchesautomatically.Select
thewashcycleandoptionsdesiredORpressSTART/RESUME
torepeatthesamecycleandoptionsasinthepreviouswash
cycle.

Youcanaddanitemanytimebeforethemainwashstarts.
Openthedoorslowlyandaddtheitem.Closethedoorfirmly.

PressSTART/RESUME.

Cycle status indicators allow sTATUS
yOUto follow the progress of

your dishwasher cycle. Clean indicator glows when the cycle is
finished.

If you have a drain air gap,
check and clean it if the

dishwasher isn't draining
well.

Storing the Dishwasher

If you will not be using the dishwasher during the summer months,
turn off the water and power supply to the dishwasher. In the

winter, if the dishwasher could be exposed to near freezing
temperatures or is left in aseasonal dwelling such as a second

home or vacation home, avoid water damage by having your
dishwasher winterized by authorized service personnel.

S_r_sn_ Wasi, n_ OTyl Cleaa 5ani[ized

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In U.S.A., www.whirlpooLcom In Canada, www.whirlpool.ca

Dishwasher is not operating properly

• Dishwasher does not run or stops during a cycle
Is the door closed tightly and latched?
Is the right cycle selected?
Is there power to the dishwasher? Has a household fuse blown,

or has a circuit breaker tripped? Replace the fuse or reset the
circuit breaker. If the problem continues, call an electrician.

Has the motor stopped due to an overload? The motor
automatically resets itself within a few minutes. If it does not
restart, call for service.

Is the water shutoff valve (if installed) turned on?
It is normal for certain cycles to repeatedly pause for several

seconds during the main wash.

• Clean light is flashing

The dishwasher has malfunctioned. Call for service.

• Dishwasher will not fill z'_./_
Is the overfill protection float able to

move up and down freely? Press down

to release.

• Dishwasher seems to run too long

The dishwasher can run up to 31/2hours depending on soil

level, water temperature, cycles and options.

Is the water supplied to the dishwasher hot enough? The
dishwasher runs longer while heating water.

Is the dishwasher cycle time within the cycle times? See cycle
sections wash times. A delay automatically occurs in some

wash and rinse cycles until the water reaches the proper
temperature.

This dishwasher is equipped with an optical sensor wash that
detects water temperature, soil and detergent amount. Wash

cycles are adjusted based on what is sensed.
IMPORTANT: The very first wash cycle after installation in your

home will be adjusted to include an additional 2 rinses. This
cycle must not be interrupted for proper sensor adjustment. If

this adjustment cycle is canceled or stopped before the Clean
light comes on at the end of the cycle, the next wash cycle will

repeat this sensor adjustment.
Water remains in the dishwasher

Is the cycle complete?
Detergent remains in the covered section of the dispenser
Is the cycle complete?

Is the detergent lump-free? Replace detergent if necessary.
White residue on the front of the access panel
Was too much detergent used?

Is the brand of detergent making excess foam? Try a different
brand to reduce foaming and eliminate buildup.

4

• Odor in the dishwasher

Are dishes washed only every 2 or 3 days? Run a rinse cycle

once or twice a day until you have a full load.
Does the dishwasher have a new plastic smell? Run a vinegar

rinse as described in "Dishwasher Care."

Condensation on the kitchen counter (built-in models)

Is the dishwasher aligned with the countertop? Moisture from

the vent in the dishwasher console can form on the counter.

Refer to the Installation Instructions for more information.

Dishes do not dry completely

• Dishes do not dry completely
Did you use a rinse aid? Your dishwasher is designed to use

rinse aid for good drying performance. Without rinse aid your
dishes and dishwasher interior will have excessive moisture.

The heat dry option will not perform as well without rinse aid.

• Dishes are not dry
Did you load your dishwasher to allow proper water drainage?

Do not overload. Use a liquid rinse aid to speed drying.

Are the plastics wet? Plastics often need towel drying.

is the rinse aid dispenser empty?
Did you use an air-dry or energy-saving dry option? Use a

heated drying option for dryer dishes.

• Excess moisture on racks and dishwasher interior

Check the rinse aid indicator to see that there is rinse aid in the
dispenser.

Spots and stains on dishes

• Spotting and filming on dishes
Isyour water hard, or is there a high mineral content in your

water? Conditioning the final rinse water with a liquid rinse aid

helps eliminate spotting and filming. Keep the rinse aid
dispenser filled. Always use a high-temp option. If your water

hardness is 13 grains or above, it is strongly recommended that

you install a home water softener. If you do not wish to drink
softened water, have the softener installed onto your hot water

supply.

is the water temperature too low? For best dishwashing results,

water should be 120°F (49°C) as it enters the dishwasher.

Did you use the correct amount of effective detergent? Use
recommended dishwasher detergents only. Do not use less

than 1 tbs (15 g) per load. Detergent must be fresh to be

effective. Heavy soil and/or hard water generally require extra

detergent.

is the home water pressure high enough for proper dishwasher

filling? Home water pressure should be 20 to 120 psi (138 to

828 kPa) for proper dishwasher fill. If you have questions about

your water pressure, call a licensed, qualified plumber.

NOTE: To remove spots and film from glassware, remove all

silverware and metal items and run avinegar rinse as described

in "Dishwasher Care."

Silica film or etching (silica film is a milky, rainbow-colored
deposit; etching is a cloudy film)

Sometimes there is a water/chemical reaction with certain

types of glassware. This is usually caused by some

combination of soft or softened water, alkaline washing

solutions, insufficient rinsing, overloading the dishwasher, and
the heat of drying. It might not be possible to avoid the

problem, except by hand washing.

To slow this process use a minimum amount of detergent but

not less than 1 tbs (15 g) per load. Use a liquid rinse aid and
underload the dishwasher to allow thorough rinsing. Silica film

and etching are permanent and cannot be removed. Do not use
heated drying.

• White spots on cookware with nonstick finish
Has the dishwasher detergent removed cookware seasoning?

Reseason cookware after washing it in the dishwasher.

• Brown stains on dishes and dishwasher interior
Does your water have high iron content? Rewash dishes using

1-3 tsp (5-15 mL) of citric acid crystals added to the covered
section of the detergent dispenser. Do not use detergent.

Follow with a Normal wash cycle with detergent. If treatment is
needed more often than every other month, the installation of

an iron removal unit is recommended.

• Black or gray marks on dishes
Are aluminum items rubbing dishes during washing?

Disposable aluminum items can break down in the dishwasher
and cause marking. Hand wash these items. Remove
aluminum markings by using a mild abrasive cleaner.

• Orange stains on plastic dishes or dishwasher interior
Are large amounts of tomato-based foods on dishes placed in

the dishwasher? It may be necessary to use a stain removal
product to remove stains from your dishwasher. Stains will not
affect dishwasher performance.

Noises

• Grinding, grating, crunching or buzzing sounds
A hard object has entered the wash module (on some models).

When the object is ground up, the sound should stop. If the
noise persists after a complete cycle, call for service.

Dishes are not completely clean

• Food soil left on the dishes
Is the dishwasher loaded correctly?

Did you choose the cycle that describes the most difficult soil in
your dishwasher? If you have some items with heavier soils,

use a heavier cycle.
Is the water temperature too low? For best dishwashing results,

water should be 120°F (49"C) as it enters the dishwasher.
Did you use the correct amount of fresh detergent? Use

recommended dishwasher detergents only. Do not use less
than 1 tbs (15 g) per load. Detergent must be fresh to be

effective. HeaW soil and/or hard water generally require extra
detergent.

Is detergent caked in dispenser? Use fresh detergent only. Do
not allow detergent to sit for several hours in a wet dispenser.

Clean dispenser when caked detergent is present.
Is the pump or spray arm clogged by labels from bottles and

cans?
Is the home water pressure high enough for proper dishwasher

filling? Home water pressure should be 20 to 120 psi (138 to
828 kPa) for proper dishwasher fill. If you have questions about

your water pressure, call a licensed, qualified plumber.
Are high suds slowing the wash arm? Do not use soap or

laundry detergents. Use recommended dishwasher detergents
only.

Dishes are damaged during a cycle

• Chipping of dishes
Did you load the dishwasher properly? Load the dishes and

glasses so they are stable and do not strike together from
washing action. Minimize chipping by moving the rack in and

out slowly.
NOTE: Antiques, feather-edged crystal, and similar types of

china and glassware might be too delicate for automatic
dishwashing. Wash by hand.

WHIRLPOOLCORPORATIONMAJORAPPLIANCEWARRANTY

ONE YEAR LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter "Whirlpool") will pay for Factory Specified Parts and

repair labor to correct defects in materials or workmanship. Service must be provided by a Whirlpool designated service company. This
limited warranty applies only when the major appliance is used in the country in which itwas purchased.

ITEMS WHIRLPOOL WILL NOT PAY FOR

1. Service calls to correct the installation of your major appliance, to instruct you how to use your major appliance, to replace or repair
house fuses or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Those consumable parts are excluded from warranty
coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance

with electrical or plumbing codes, or use of products not approved by Whirlpool.

5. Any food loss due to refrigerator or freezer product failures.

6. Replacement parts or repair labor costs for units operated outside the United States or Canada.

7. Pickup and delivery. This major appliance is designed to be repaired in the home.

8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

9. Expenses for travel and transportation for product service in remote locations.

10. The removal and reinetallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with
published installation instructions.

11. Replacement parts or repair labor costs when the major appliance is used in a country other than the country in which it was
purchased.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS UMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED

HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. WHIRLPOOL SHALL NOT BE LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL

OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABIUTY OR

FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.

Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized Whirlpool dealer to determine if another
warranty applies. 5/07

For additional product information or to view FAQe (Frequently Asked Questions), in U.S.A., visit www.whirlpool.com

In Canada, visit www.whirlpool.ca

if you do not have access to the Internet and you need assistance using your product, you may contact Whirlpool at the number below.

Have your complete model number read_4 You can find your model number and serial number on the label located near the door on the
right-hand or left-hand side of the dishwasher interior.

For assistance or service in the U.S.A., call 1-800-253-1301. In Canada, call 1-800-807-6777.

if you need further assistance, you can write to Whirlpool with any questions or concerns at:

In U.S.A.:

Whirlpool Brand Home Appliances
Customer eXperience Center

553 Benson Road

Benton Harbor, M149022-2692

Please include a daytime phone number in your correspondence.

Please keep this User Instructions and model number information for future reference.

In Canada:

Whirlpool Brand Home Appliances
Customer Interaction Centre

1901 Minnesota Court
Mississauga, Ontario L5N 3A7

W10130986A

SP PN W10133161A 9/07

© 2007 Whklpool Corporation.All rights reserved. @RegisteredTrademarWTMTrademark ofWhiMpool,U.S.A. WhiMpoolCanada LP licenseein Canada Printed in U.S.A.