Whirlpool DLC 7200, DLC 7000, DLC 7001 INSTRUCTION FOR USE

GB PROGRAMME CHART

Whirlpool is a registered trademark of Whirlpool USA

}

A. “Door open” indicator

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indicator

C. “Water tap closed” indicator

D. “Clean pump” indicator

E. Programme selector

F. “Start/Pause” button

G. “Spin” button

H. Programme flow bar (over the line)

Start delay indicators (under the line)

I. “Reset” button

J. “Start delay” button

Programme

Cotton

95 °C

Cotton

40 - 60 °C

Jeans

40 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

cold - 40 °C

EcoCotton

40 - 60 °C

Rinse & Spin

Spin

Drain

❉ = optional / Yes = dosing required.

For improved garment care, spin speed is restricted in these programmes.

95 °C

40 - 60 °C

40 °C

30 - 40 - 60 °C

30 - 40 °C

40 °C

30 °C

- 40 °C

40 - 60 °C

Max.

Care

Labels

—

——

Load

- Respect the manufacturer’s recommendations on the care label

Nor mally t o heavi ly soil ed and robust whi te cotton l aundr y. In case of heavy soi ling or stains, yo u

7.0

can add an oxygen-based bleach additive which can be used at 95°C. This programme eliminates bacteria, ensuring sanitization of your laundry.

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of

7.0 cotton and linen.

Normally soiled cotton jeanswear and garments made of robust jeanslike material such as

6.0 trousers and jackets.

Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their

3.0 blends with cotton.

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Lightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.

4.0

Effective one-hour programme. Make sure to wash only similar colours together in one wash load.

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.

3.0 Brief programme to refresh your laundry.

Textiles made of wool, linen, viscose or silk (respect care label!) marked as hand-washable or machine-washable.

1.0 This programme, at 40° C, is tested and approved by the Woolmark Company for machine- and

handwashable wool textiles which are labelled with the Woolmark.

Normally soiled cotton laundry.

7.0

Most favourable programme in terms of combined water and energy consumption for washing cotton laundry. - Reference programme for the Energy Label.

7.0 Same as the last rinse and the final spin in the “Cotton” programme.

7.0 Intensive spin. Same as spin cycle in the “Cotton” programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

Type of wash/Notes

Detergents and additives Special options Start

Pre-

wash

❉

—

The wool cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0619

—— ❉ —— ❉ ❉ ❉ ❉

—— — —— — —❉ ❉

—— — —— — ——❉ —

Main

Softener Rapid Pre-

wash

Yes

❉ — ❉ ❉ ❉ ❉ ❉

Yes

❉ ❉ ❉ ❉ ❉ ❉ ❉

Yes

❉ ❉ ❉ — ❉ ❉ ❉

Yes

❉ ❉ ❉ ❉ ❉ ❉ ❉

Yes

❉ — ❉ — ❉ ❉ ❉

Yes

❉ —— ❉ ❉ ❉ ❉

Yes

❉ —— — ❉ ❉ ❉

Yes

❉ — — — ❉ ❉ ❉

Yes

❉ —— ❉ ❉ ❉ ❉

wash

Intensive

rinse

Max.

delay

Rinse

hold

Spin

Speed

rpm

max.

1000

max.

1000

max.

5019 301 06648

Whirlpool is a registered trademark of Whirlpool USA

CONSUMPTION DATA

* Reference programmes for Energy Label.

Programm e Tem pe ra tu re

Cotton 95 7.0 74** 2.10 Cotton 60 7.0 54 1.19 Cotton 40 7.0 69 0.75

Jeans 40 6.0 86 0.80 2:25 1:30 Synthetics 60 3.0 50** 0.80 1:35 1:14 Synthetics 40 3.0 46 0.50 1:20 0:59

Delicates 40 1.5 60 0.65 Delicates 30 1.5 60 0.50

Daily load 40 4.0 45 0.50

Quick wash 30 3.0 45 0.30

Wool 40 1.0 45 0.50 0:40 —

Wool col d 1.0 4 5 0.10 0:35 — EcoCotton* 60 7.0 54 0.91 4:00 — EcoCotton* 60 3.5 40 0.85 3:00*** —

Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature. Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).

** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained. *** Automatic adaptation of programme duration after detection of wash load.

LOAD LAUNDRY, ADD DETERGENT AND SELECT THE PROGRAMME

Load the laundry, close the door and add detergent as indicated

on the front page and as described in the chapter “Detergent and

Additives” in your Instructions for Use. Turn the programme

selector to the desired programme and temperature.

The “Start/Pause” indicator blinks.

EcoCotton* 40 3.5 40 0.65 3:00 —

(°C)

SELECT ANY DESIRED OPTION

Push the button of any option desired - the indicator lights up.

If the combination programme/option or option/option is not

possible, the indicator switches off automatically.

“Rapid” button

•Enables quicker washing by shortening the programme duration.

• Recommendable for only lightly soiled laundry.

“Prewash” button

• Adds a prewash cycle to the wash programme selected;

prolongs the programme by about a quarter of an hour.

• Recommended for heavily soiled laundry (e.g. with sand or

granular dirt).

• Do not use liquid detergent for the main wash when

selecting “Prewash”.

Load

Water

Energy

Approximate programme duration

(kg)

(l)

(kWh)

without “Rapid” with “Rapid”

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• Particularly suitable for areas with very soft water, washing

baby linen and helping people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid creasing and

prevent colours from changing.

• Particularly useful if you want to postpone spinning to a later

time, or if you want to drain only.

• The programme stops to “Rinse hold” at the time the “Rinse

hold” indicator in the programme flow bar is on. The “Start/

Pause” indicator blinks.

Terminate the “Rinse hold” option :

•Press the “Start/Pause” button ; the programme will

terminate automatically with the final spin cycle for the

present wash programme.

• If you do not wish to spin the clothes, turn the programme

selector to the “Drain” programme and press the “Start/

Pause” button to start draining.

(hrs.min)

2:10 — 2:20 1:35 2:10 1:15

0:50 — 0:46 — 1:00 — 0:30 —

“Spin” button

• Every programme has a predefined spin speed; press the

button if you want to set a different spin speed.

• If spin speed “0” is selected, the final spinning is cancelled

and the water is drained only. However, intermediate spin

phases remain during rinse.

START DELAY

The “Start delay” allows to run the machine at the consumer’s

convenience, for example at night when electricity is cheaper. Do

not use liquid detergent when activating “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select a delay time of 1, 3, 6,

9 or 12 hours.

•Press the “Start/Pause” button .

The countdown of the delay time begins.

• The delay time indicator goes off when the programme starts

and it is replaced by the programme flow bar indication.

• Once having pressed the “Start/Pause” button , the delay

time can be changed by pressing again the “Start delay” button.

To cancel the “Start delay”

...before you press the “Start/Pause” button :

• Turn the programme selector to another position or press

the “Reset” button .

...after having pressed the “Start/Pause” button :

•Press the “Start/Pause” button - the selected start

delay disappears from the display.

PROGRAMME START

Open the water tap and press the “Start/Pause” button .

The “Start/Pause” indicator lights up. The programme flow bar

shows the current programme phase, running from left to right

through Wash, Rinse, Spin/Drain.

“DOOR OPEN” INDICATOR

Before starting and after end of a programme, the indicator lights to

show that the door can be opened. As long as a wash programme is

running, the door remains locked and must on no account be forced

open. In case you have an urgent need to open it during a running

programme, refer to “Reset a running programme before the end”.

FAILURE INDICATORS

If one of the failure indicators blinks, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Water tap closed”: no or not sufficient inlet water.

“Service”: failure or malfunction of an electrical component.

“Clean pump”: waste water is not pumped out.

PROGRAMME END

• The “Door open” indicator lights up, and the display

shows “End”.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the

programme. The indicator blinks.

2. Select the new programme and, if you want, another spin

speed and any options.

3. Press the “Start/Pause” button again. The new

programme continues at the same position where the

previous programme was interrupted. Do not add

detergent for this programme.

RESET A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press and hold the “Reset” button for a few seconds.

The water is drained. It may last some time until the door

can be opened.

5019 301 06648