Whirlpool DLC 6020 Product Sheet

GB PROGRAMME CHART

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and

react appropriately, e.g.:

B. “Service” indication

C D

C. “Water tap closed” indication

D. “Clean pump” indication

Detergents and Additives Special options Max

Programme

Cotton

95 °C

Cotton

40 - 60 °C

Jeans

40 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Eco Cotton

40 - 60 °C

Rinse & Spin

Care

Labels

Cotone

95 °C

Cotone

40 - 60 °C

Jeans

40 °C

Sintetici

30 - 40 - 60 °C

Delicati

30 - 40 °C

40 °C

Rapido

30 °C

Lana

- 40 °C

Eco Cotone

40 - 60 °C

Risciacquo &

Centrifuga

Max. Load

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or

6.0

stains, you can add an oxygenbased bleach additive which can be used at 95°C. This

- Respect the manufacturer's recommendations on the care label

Type of wash / Notes

Pre-

wash

programme eliminates bacteria, ensuring sanitization of your laundry. Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made

6.0 of cotton and linen.

Normally soiled cotton jeanswear and garments made of robust jeanslike material such

5.0

as trousers and jackets.

Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.)

3.0 or their blends with cotton.

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their

3.0

blends. Effective one-hour programme. Make sure to wash only similar colours together in one

– Yes

wash load.

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.

3.0

Brief 30-minutes programme to refresh your laundry.

– Yes

Textiles made of wool, linen, viscose or silk (respect care label!) marked as hand-washable or machine-washable.

1.0

This programme, at 40° C, is tested and approved by the Woolmark Company for machine-

– Yes

and handwashable wool textiles which are labelled with the Woolmark.

Normally soiled cotton laundry. Most favourable programme in terms of combined water

6.0

and energy consumption for washing cotton laundry.

– Yes

- Reference programme for the Energy Label.

– 6.0 Same as the last rinse and the final spin in the “Cotton” programme. – –

Spin Centrifuga – 6.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. – – –

Main

Wash

Yes

E. Programme selector

F. “Start /Pause” button

G. Spin speed selector

H. Programme sequence indicator and Start delay indication

I. “Reset” button

J. “Start delay” button

Start

Softener

ritardato

delay

Avvio

Rapid

Rapido

i i

i i i i i i i

i i i i

i i i i i i i

i i

Pre-

Intensive

wash

risnse

Pre-

Risciacquo

lavaggio

intensivo

–

i i i i

Rinse

hold

piega

–

– –

–

i i i

– – –

– –

i i i

– – – –

Anti

i i

Spin

Centri-

fuga

Spin

Speed

rpm

Max.

1000

Max.

1000

Max.

Drain Scarico acqua – – Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”. – – –

i : option / Yes : dosing required

For improved garment care spin speed is restricted

in these programmes.

The wool cycle of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0619

– – – – – –

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01340

CONSUMPTION DATA

Programme

Cotton 95 6.0 59* 1.90 2:00 -

Cotton

Cotton 40 6.0 54 0.65 2:00 1:15

Jeans 40 5.0 69 0.63 2:15 1:30

Synthetics

Synthetics 40 3.0 46 0.50 1:20 0:59

Delicate 40 1.5 50 0.65 0:50 -

Delicate 30

Daily load 40 3.0 45 0.45 1:00 -

Quick wash 30 3.0 40 0.30 0:30 -

Wool 40 1.0 45 0.60 0:40 -

Eco Cotton ** 60 6.0 49 0.78 4:00 -

Eco Cotton ** 60 3.0 37 0.69 2:20 -

Eco Cotton ** 40 3.0 37 0.58 2:30 -

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). *

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

** Reference programmes for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Temperature

(°C)

60 3.0

Add detergents as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

• Turn the programme selector to the desired programme and temperature.

• The indication lamp next to “Start/Pause” button blinks.

• The indication lamp of the predefined spin speed lights up.

SELECT ANY DESIRED OPTION

Push the button of any option desired - the respective indication lamp lights up. If the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Rapid” button

• Enables quicker washing by shortening the

programme duration.

• Recommendable for small loads or only lightly

soiled laundry.

Load

(kg)

6.0 49

1.5

Water

(l)

50* 0.70

50 0.50

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt). Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the “Prewash” option.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with

very soft water, washing baby linen and helps people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without pregressing to the final spin cycle to avoid creasing and prevent colours from changing.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only. Note: The programme stops to “Rinse hold” at the time the “Rinse hold” lights in the preogramme sequence indication is on. The indication lamp next to the “Start/Pause” button blinks.

Terminate the “Rinse hold” option:

• Press the “Start/Pause” button; the programme will terminate automatically with the final spin cycle for the present wash programme.

Energy

(kWh)

without “Rapid”

1.02 2:30

Approx. programme duration

(hours : minutes)

without “Rapid” with “Rapid”

1:35

0:46 -

1:14

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start/Pause” button.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating “Start delay” option.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay

time by 1, 3, 6, 9 or 12 hours.

• Press the “Start/Pause” button. The indication next to the “Start delay” button blinks and the countdown of the delay time begins.

• The time delay indication disappears when the programme starts and it is replaced by the programme sequence indication.

• Once having pressed the “Start(Pause)” button, the delay time can be reduced by pressing again the “Start delay” button.

To cancel the “Start delay” ..before you press the “Start/Pause” button:

• Turn the programme selector to another position or press the “Reset” button.

..after having pressed the “Start/Pause” button:

• Press the “Start(Pause)” button - the light of the selected start delay goes off. Press “Start/Pause” again if you want to start the selected programme immediately.

PROGRAMME START

Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Drain/Spin.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset)” a running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component.

“Water tap closed”

The washing machine has no or insufficient water supply; the water tap might be closed or the water inlet hose kinked.

“Clean pump”

Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see “Cleaning the filter” in your Instructions for Use).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the programme. The light blinks.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press and hold the “Reset” button for a few

seconds.

Any existing water is drained out. It may last some time until the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01340