COMMERCIAL STACK DRYERS
Featuring Mechanical Controls
SAVE SPACE
Stacked unit gives you double drying capacity in limited space.
FOR YOUR CUSTOMERS
• Large 7.4 Cu. Ft. Capacity
• 3 Cycle Options: Heavy-Duty, Normal
and Delicates
• Fabric Protection Cool-Down Care
• Easy-to-Follow Console Instructions
• 180° Wide-Opening Side-Swing Door Allows
for Convenient Access
SINGLE OPERATING THERMOSTAT
For simple accurate temperature control.
LARGE CAPACITY METERCASE
• Large Coin Box for Reduced Collections
• Accepts Coin Slide, Coin-Drop and Card Reader Configurations
CSP2860TQ—27" Electric Stack Dryer with Dual Metercase
CSP2861TQ—27" Gas Stack Dryer with Dual Metercase
Machine Accepts the Following Compatible |
• Powdered Paint Top and Cabinet, |
Payment Systems (not included): |
Removable In-Door Lint Filters, T40 |
— Coin Slide |
Torx® and Pin Security Kit Included |
— Retrofit Coin-Drop |
• Optional Window Door Kit #W10791532 |
— Retrofit Card Reader |
• Electric Model (2) Elements Rated at |
• 7.4 Cu. Ft. Drum Capacity |
5600 Watts, 240 Volt; (2) 30 Amp |
• Push-to-Start Button, Rotary Controls |
Circuit Breakers Required |
• 3 Cycles: Heavy-Duty (High Heat), |
• Gas Model (2) 22K BTU Burners |
Normal (Medium Heat), and Delicates |
• Two Motors: 1/3-HP Motor with |
(Low Heat) |
Built-In Overload Protector; |
• Balanced Airflow System |
Centrifugal Switch Turns Off Heating |
• Large Removable, Door-Mounted |
Element When Motor Stops |
Lint Screen |
• Electric Models Require 2 Power Cords |
• Front Service Accessibility |
(Sold Separately) |
• 3-Way Venting Upper Dryer (Back and |
• Gas Models: Order 2 LP Conversion |
Sides); 4-Way, Multi-Vent Options |
Kits, Part #49572A |
Lower Dryer (Back, Bottom, and Sides) |
• Mechanical Dual Metercase Money |
|
Acceptors Not Included (2 Required) |
*Call 1-800-NO-BELTS for warranty details. |
• 3-Year Limited Parts Only Warranty* |
COMMERCIAL STACK DRYERS
Featuring Mechanical Controls
Whirlpool® Commercial Stack Dryers
Mechanical Controls
DRYER SPECIFICATIONS
MODELS |
CSP2860TQ† |
CSP2861TQ†† |
GENERAL INFORMATION |
|
|
Stainless steel look push-button console, powdered |
Dual Metercase Accepts the |
Dual Metercase Accepts the |
paint cabinet, improved collar assembly featuring |
||
cam lock console, taller profile and improved security |
Following Payment Systems: |
Following Payment Systems: |
metercase integral with collar, two coin box and money |
Coin Slide |
Coin Slide |
acceptor openings, T40 Torx® & Pin security included, |
Retrofit Coin-Drop |
Retrofit Coin-Drop |
removable in-door lint filters. Upper and lower dryers |
Retrofit Card Reader |
Retrofit Card Reader |
may use different money acceptors at the same time. |
OPL Push-To-Start |
OPL Push-To-Start |
3-way venting upper dryer, 4-way lower dryer. |
|
|
DRUM VOLUME |
14.8 Cu. Ft. |
14.8 Cu. Ft. |
|
(7.4 Cu. Ft. Per Drum) |
(7.4 Cu. Ft. Per Drum) |
MOTOR |
Two 1/3-HP Motors with |
Two 1/3-HP Motors with |
|
Built-In Overload Protector, |
Built-In Overload Protector, |
|
5.9 Amps Max Rating |
5.9 Amps Max Rating |
ELECTRICAL REQUIREMENTS |
3 or 4-Wire Nominal 240/208 |
Nominal 120 Volt, 60 Hz, A.C. |
|
Volt, 60 Hz, A.C. Standard |
Standard 15 Amp Breaker/Fuse |
|
30 Amp Breaker/Fuse Branch |
Branch Circuit per Dryer Drum |
|
Circuit per Dryer Drum |
|
|
(Subject to Local Codes) |
|
HEATER TYPE |
Electric |
Gas* |
HEATER/BURNER RATING |
2 Heaters Rated at 5600 Watts |
2 Burner Assemblies Rated at |
(Add 500 Watts Approx. for Motor on all Dryer Models) |
per Dryer (11.2 KW Total) |
22,000 BTU per Dryer (44,000 |
|
|
BTU Total) Natural Gas |
OPERATIONAL AMPERAGE |
Motor – 4.0 Amps |
Motor – 4.0 Amps |
(Does Not Include Control or Gas Valve) |
No Load per Motor |
No Load per Motor |
|
8 Amps Total Heater 23.33 |
8 Amps Total |
|
Amps @ 240V x 2, 54.66 Total |
|
SHIPPING WEIGHT (Estimate) |
294 Lbs. |
300 Lbs. |
DIMENSIONS |
|
|
Width – in. (cm) |
27 (68.6 cm) |
27 (68.6 cm) |
Depth – in. (cm) |
28.5 (72.39 cm) |
28.5 (72.39 cm) |
Height – in. (cm) |
76.375** (194 cm) |
76.375** (194 cm) |
*Burner orifices are available for manufactured, natural, mixed and LP gas with varying BTU ratings. **Height at metercase top.
†Power cords on electric models sold separately. ††LP Conversion Kit: 49572A. Energy information is available online at www.whirlpoolcommerciallaundry.com/products
Exhaust Information
All dryers require the equivalent of a 4-inch diameter exhaust duct. Rigid metal duct is recommended. Failure to properly exhaust the dryer will result in improper operation.
|
# of 90° |
|
|
|
|
|
turns |
4" Hood |
2 1⁄2" Hood |
||
|
Maximum length of 4" diameter |
||||
|
|
rigid metal duct |
|
||
|
0 |
64 |
Ft. |
58 |
Ft. |
|
1 |
54 |
Ft. |
48 |
Ft. |
27" & 29" Dryer Venting Requirements |
2 |
44 |
Ft. |
38 |
Ft. |
|
3 |
35 |
Ft. |
29 |
Ft. |
|
4 |
27 |
Ft. |
21 |
Ft. |
3-YEAR LIMITED PARTS ONLY WARRANTY
For a period from the date of original purchase through the time listed above, the designated parts that fail in normal commercial use will be repaired or replaced free of charge for the part itself, with the owner paying all other costs, including labor, transportation and customs duty. Chemical damage is excluded from all warranty coverage. See complete warranty for details.
Dimensions are for planning purposes only. For complete information,
see installation instructions packed with product.
FRONT VIEW
SIDE VIEW
BACK VIEW
To Locate a Distributor Near You, Please Visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-NO-BELTS
TORX is a registered Trademark of Textron Industries, Inc. |
|
®/™ ©2015 Whirlpool. All rights reserved. |
WY150058 3/15 |