Whirlpool CGM2751TQ Dimension Guide
COMMERCIAL DRYERS
Featuring Factory-Installed Coin Slide and Coin Box
FOR YOUR CUSTOMERS
• Large Capacity is Ideal for Family-Size Loads
• Increased Capacity Allows Large Loads to
Tumble and Spread Reducing Dry Time
• 3 Cycle Options: Regular/Heavy, Permanent
Press, and Knits/Delicates
• Easy-To-Follow Console Instructions
• 180° Wide-Opening Side-Swing Door Allows
For Convenient Access
IMPROVED AIRFLOW SYSTEM
• New Blower Housing Wave
Insert Increases Air Velocity
up to 10%
• Increases Effi ciency, Heating Element Life
Span and Improves Fabric Care*
* Results per Whirlpool® dryer testing conducted 07/03 – 08/04.
CEM2750TQ—27" Electric Dryer
CGM2751TQ—27" Gas Dryer
• 7.4 Cu. Ft. Drum Capacity
• Push-Button Controls with
Stainless-Look Console
• 3 Cycles: Regular/Heavy (High Heat),
Permanent Press (Medium Heat),
and Knits/Delicates (Low Heat)
• Large Removable, Door-Mounted
Lint Screen (84 Sq. In.)
• 180° Wide-Opening
Side-Swing Door
• Porcelain Top, Powdered Paint
Cabinet
• Rust-Proof Stainless Steel Torx®
Control Panel Screws
• Front Service Accessibility
• 4-Way, Multi-Vent Options
(Back, Bottom and Sides)
• Electric Model Features Element
• Gas Model Features a 22K
• Motor: 1/3-HP with Built-In
• Eight Quarter Coin Slide Capacity,
• Power Cord Sold Separately
• 3-Year Limited Parts Only
** Call 1-800-NO-BELTS for warranty details.
Rated at 5600 Watts, 240 Volt
BTU Burner
Overload Protector; Centrifugal
Switch Turns Off Heating Element
When Motor Stops
Set Your Dry Price From $0 to $2
Per Cycle ($1 Factory Preset)
(Electric Model Only)
Warranty**
SINGLE OPERATING THERMOSTAT
For simple accurate temperature control.
LARGE CAPACITY METERCASE
Larger coin box for reduced collections.
FRONT LOCK READY
• Factory-Installed Lock Blank Provides a Visual
Vandalism Deterrent
• Optional Front Panel Lock Assembly (Part
#358290) for Added Security of Tying Front and
Top Panels Together
COMMERCIAL DRYERS
Featuring Factory-Installed Coin Slide and Coin Box
DRYER SPECIFICATIONS
MODELS CEM2750TQ CGM2751TQ•
GENERAL INFORMATION
Stainless-look push-button console, white enamel
drum, porcelain finish top, powdered paint cabinet,
front panel lock blank factory-installed, removable lint
filter, improved metercase, 4-way venting.
DRUM VOLUME 7.4 Cu. Ft. 7.4 Cu. Ft.
MOTOR 1/3-HP Single-Speed Motor with Built-In Overload
ELECTRICAL REQUIREMENTS 3-Wire Nominal 240/208 Volt, 60 Hz, A.C.
HEATER TYPE Electric Gas*
HEATER/BURNER RATING
( Add 500 Watts Approx. for Motor on all Dryer Models)
OPERATIONAL AMPERAGE
( Does Not Include Control or Gas Valve)
SHIPPING WEIGHT (EST.)
DIMENSIONS
Width — in. (cm) 27 (69 cm) 27 (69 cm)
Depth — in. (cm) 28.5 (72.39 cm) 28.5 (72.39 cm)
Height — in. (cm) 43** (109 cm) 43** (109 cm)
*Burner orifices are available for manufactured, natural, mixed and LP gas with varying BTU ratings. **Height at metercase top. Power cords on electric models sold separately. • LP Conversion Kit: 49572.
Energy information is available online at www.whirlpoolcommerciallaundry.com/products.
Metercase Model Factory-Installed
Coin Slide and Coin Box,
$0-$2 per Cycle, $1 Factory Preset
Protector, 5.9 Amps Max Rating
Standard 30 Amp Breaker/Fuse Branch Circuit per
Dryer (Subject to Local Codes)
Heater Rated at 5600 Watts 22,000 BTU Natural Gas
Motor – 4.0 Amps No Load Heater
23.33 Amps @ 240 Volt 27.33 Total
134 Lbs. 135 Lbs.
Metercase Model Factory-Installed
Coin Slide and Coin Box,
$0-$2 per Cycle, $1 Factory Preset
1/3-HP Single-Speed Motor with Built-In Overload
Protector, 5.9 Amps Max Rating
Nominal 120 Volt, 60 Hz, A.C. Standard 15 Amp
Breaker/Fuse Branch Circuit per Dryer
(Subject to Local Codes)
Motor – 4.0 Amps No Load
Dimensions are for planning purposes only. For
complete information, see installation instructions
packed with product.
DRYER FRONT VIEW
3-YEAR LIMITED PARTS
ONLY WARRANTY
For a period from the date of original purchase through
the time listed above, the designated parts that fail in
normal commercial use will be repaired or replaced free
of charge for the part itself, with the owner paying all
other costs, including labor, transportation and customs
duty. Chemical damage is excluded from all warranty
coverage. See complete warranty for details.
DRYER BACK VIEW
Exhaust Information
All dryers require the equivalent of a 4-inch
diameter exhaust duct. Rigid metal duct is
recommended. Failure to properly exhaust the
dryer will result in improper operation.
27" & 29" Dryer Venting Requirements
# of 90° turns 4" Hood 2 1⁄2" Hood
Maximum Length of 4" Diameter Rigid Metal Duct
0 64 Ft. 58 Ft.
1 54 Ft. 48 Ft.
2 44 Ft. 38 Ft.
3 35 Ft. 29 Ft.
4 27 Ft. 21 Ft.
Maximum Length of 4" Diameter Flexible Metal Duct
0 36 Ft. 28 Ft.
1 31 Ft. 23 Ft.
2 27 Ft. 19 Ft.
3 25 Ft. 17 Ft.
4 23 Ft. 15 Ft.
To Locate a Distributor Near You, Please Visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-NO-BELTS.
TORX is a registered Trademark of Textron Industries, Inc.
®Registered trademark/™Trademark of Whirlpool, U.S.A. ©2011 Whirlpool Corporation. All rights reserved.
Whirlpool Corporation • Benton Harbor, Michigan 49022 U.S.A.
WL110245 8/11
Loading...