Whirlpool CENTURY 1400 PROGRAM CHART

30106497GB.fm Page 1 Wednesday, May 25, 2011 12:51 PM

GB PROGRAMME CHART

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication

C. “Water tap closed” indication

D. “Clean pump” indication

Te m p e -

Programme

Mixed Gemengde 20 - 60 °C 6.0

Cotton Kookwas 20 - 95 °C 7.0

Synthetics Synthetisch 20 - 60 °C 3.5

Delicates Fijne was 20 - 40 °C 2.5

Fabrics

Woo l/

Handwash

White Wit 20 - 60 °C 7.0

Light

colours

Colours

Dark

SuperEco SuperEco 20 - 60 °C 7.0

Eco

AquaEco AquaEco 20 - 40 °C 3.0

Speed 15 Snelwas 15 20 - 30 °C 3.0

Bedlinen Beddengoed 20 - 95 °C

Big Items XXL 20 - 60 °C 3.0

Specials

Rinse & Spin Spoelen&Centrif.

❉: optional / Yes : dosing required

For improved garment care, spin speed is restricted in this programme.

Wol/Hand was 20 - 40 °C 2.0

Lichte kleuren 20 - 60 °C 5.5

Donkere

kleuren

rature

20 - 60 °C 5.0

——

Care

Labels

C D

Max. Load

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.

Effective one-hour programme. Make sure to wash only similar colours together in one wash load. If soil level requires, add oxygen-based stain removers.

Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and linen.

Normally soiled blouses, shirts, overalls, etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles made of silk, linen, wool and viscose marked as handwashable.

This programme is tested and approved by The Woolmark Company for machine- and handwashable wool. Select spin speed according to the manufacturer's recommendations on the care label.

Normally to heavily soiled and robust white cotton laundry.

Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition to your detergent.

White and pastel shaded garments made of delicate fabrics.

Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if necessary also stain removers or bleaches on oxygen basis. Do not use liquid detergent.

Black and dark garments made of cotton, cotton blends and polyester.

Special programme to reduce colour fading and local discolouration. Prefer to use a special liquid detergent for dark garments with this programme.

Normally to heavily soiled and robust underwear, table and bed linen, towels and shirts made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.

Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.

Saving programme with a very low water consumption. Use liquid detergent and the lowest recommended amount for 3kg laundry. Do not use softener.

Briefly worn clothing made of cotton, artificial fibers and blends with cotton.

Refresh programme. Use lowest recommended detergent amount.

White and coloured bedlinen made of cotton and synthetic fibres, or blends of both.

Reduces microbes and gently cleans, also delicate bedlinen, A thorough rinse phase helps to prevent

3.5

detergent and pollen residues. Prefer powder detergent for this programme.

Blankets made of synthetic fibres; bedcovers filled with feathers, polyester or other artificial fibres; sleeping bags, bathmats and similar items.

Rinse and intensive spin programme.

7.0

Same as the last rinse and the final spin in the “Cotton” programme.

The wool/handwash cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702

- Respect the manufacturer’s recommendations on the care label

Ty pe of wa sh /N o t e s

}

A B

°C

F. “Start (Pause)” button

G. “Spin speed” button

(with “Rinse hold” )

E. Programme selector

H. Programme sequence indication I. “Reset/Drain” button J. “Start delay” button K. “Temperature” button

Detergents and additives Selectable options Start

Pre-

Main

wash

Ye s

—

Ye s

❉

Ye s

❉

Ye s

❉

Ye s

—

Ye s

—

Ye s

—

Ye s

—

Ye s

—

Ye s

—

Ye s

—

Ye s

—

Ye s

❉

—— ❉ —— — ❉❉ ❉

L. Display

Softener Pre-

wash

Voorwas

Eco

Easy

ironing

Gemakkelijk

strijken

Intensive

rinse

Intensief Spoelen

delay

Start

selectie

Spin

speed

Centrif.

❉ —— ❉❉❉❉

❉❉❉ ❉ ❉❉ ❉

❉❉—— —❉❉

❉ —— — — ❉❉

❉ —— — ❉❉ ❉

——— — —❉❉

❉ —— — — ❉❉

❉ —— — ❉❉ ❉

❉❉—— ❉❉ ❉

Whirlpool is a registered trademark of Whirlpool USA

Spin

Max.

Spin

Speed

rpm

max.

1000

max.

1000

max.

1000

max.

5019 301 06497

Black process 45,0° 150,0 LPI

30106497GB.fm Page 2 Wednesday, May 25, 2011 12:51 PM

The Sensor Technology automatically adapts Programme Time, Water and Energy consumption to the size of your wash load.

CONSUMPTION DATA

Programme

Mixed 40 6.0 73 0.60 1:00

Cotton 95 7.0 74** 2.10 2:10

Cotton with Eco*** 60 7.0 54 0.91 4:00

Cotton 60 7.0 54 1.19 2:20

Cotton 40 7.0 69 0.75 2:05 Synthetics 60 3.5 46** 0.85 1:35 Synthetics 40 3.5 42 0.50 1:20

Delicates 30 2.5 60 0.40 0:45

Wool/Handwash 40 2.0 45 0.60 0:40

White 40 7.0 69 0.85 2:20

Light colours 40 5.5 70 0.50 1:20

Dark 40 5.0 45 0.60 1:40 SuperEco 60 7.0 69 0.84 4:00 AquaEco 40 3.0 19 0.45 1:00 Speed 15 30 3.0 30 0.20 0:15

Bedlinen 60 3.5 60 1.30 2:00

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions applicable at that time. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. *** Reference Programme for Energy Label (with separator in detergent dispenser removed for use of powder detergent).

Big Items 40 3.0 74 0.75 1:30

Te m p e r a t u r e

(°C)

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Load your laundry, close the door properly and add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use (remove separator in detergent dispenser for use of powder detergent if necessary).

1. Turn the programme selector to the desired programme. The display shows the programme duration in hours and minutes as well as the predefined temperature. The “Start (Pause)” button blinks.

2. The temperature can be altered by pressing the “Temperature” button.

3. The indication lamp of the predefined spin speed lights up. In case you want to set another spin speed, press the “Spin speed” button .

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and option is not possible, the lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt).

Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating

the Prewash option.

“Eco” button

• With a modified temperature profile and a prolonged washing

duration, the optimum combination of good washing result and lower energy consumption is achieved.

Load

Wat er

(kg)

“Easy ironing” button

• Reduces creasing by an increased water quantity and a very gentle spin.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

“Spin speed” button (incl. “Rinse hold” )

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If you select spin speed “0”, the final spinning is cancelled, and

•If you select “Rinse hold” , the laundry remains in the

Energy

(l)

(kWh)

water, washing baby linen and helping people with allergies.

the water is drained out only. However, intermediate spin

phases remain during rinse.

last rinse water without progressing to the final spin cycle to

avoid creasing and prevent colours from changing.

- Select “Rinse hold” if you want to postpone spinning to a

later time or if you want to drain only.

- Do not leave the laundry to soak in the rinse hold for too long.

- The programme stops to “Rinse hold” when the “Rinse

hold” light in the programme sequence indicator is

on. The “Start (Pause)” button light blinks.

- To terminate the “Rinse hold” by draining the water, without

any spinning, press the “Start (Pause)” button .

- To terminate the programme by spinning the laundry, press the

“Spin speed” button to select the desired spin speed and then

the “Start (Pause)” button to start the spin cycle.

Approx. Programme Duration

(hours : minutes)*

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select a delay time up to 23 hours. The light of the “Start (Pause)” button blinks.

• Press the “Start (Pause)” button . The countdown of the delay time begins. The light of the “Start (Pause)” button

is on. The light of the start delay button will keep blinking

until the programme starts.

• As soon as the programme starts, the start delay on the display is replaced by the remaining programme time, and the light of the “Start delay” button goes off.

• Once having pressed the “Start (Pause)” button , the number of hours preselected can be changed by pressing and holding the “Start delay” button.

To cancel the “Start delay” ...before you press “Start (Pause)” :

• Turn the programme selector to another position or press the

“Reset/Drain” button .

...after having pressed “Start (Pause)” :

• Press “Start (Pause)” - the delay time disappears from the display. Press “Start (Pause)” again to start the selected programme immediately.

PROGRAMME START

Open the tap and press “Start (Pause)” . The light stops blinking and is on. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the display.

CHILD LOCK

Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock:

• Turn the programme selector to a programme position, or run a programme as usual.

• Press the 2 buttons marked with the key symbol simultaneously for at least 3 seconds. A key-like symbol will shortly appear on the display to indicate that the child lock is active.

Any time you try to change a programme setting with active child lock, the display will briefly show the key-like symbol. The programme setting cannot be changed anymore. The only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock:

• Press again the 2 buttons marked with the key symbol simultaneously for at least 3 seconds.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show

that the door can be opened. As long as a wash programme is running,

the door remains locked and must on no account be forced open. In

case you have an urgent need to open it during a running programme,

refer to “Reset a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an

electrical component. Refer to the “Troubleshooting Guide” in your

Instructions for Use. If the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water

tap. If the indication still lights up, refer to the “Troubleshooting

Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is

kinked or the filter must be cleaned. In the latter case refer to the

Instructions for Use (“Removing the Filter”).

PROGRAMME END

• The display shows “End” and the “Door open” indication lights.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press “Start (Pause)” to pause the programme. The

light blinks.

2. Select the new programme, temperature, any options and

another spin speed if you want.

3. Press “Start (Pause)” again. The light is on, and the

programme continues at the same position where the

previous programme was interrupted. Do not add detergent

for this programme.

RESET A RUNNING PROGRAMME BEFORE THE END

The “Reset/Drain” button cancels a programme before

the end.

•Press the “Reset/Drain” button for at least 3

seconds. “rES” appears on the display. The water is drained

out; it may last a while until you can open the door.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06497

Black process 45,0° 150,0 LPI