WHIRLPOOL BRAND
COMMERCIAL DRYERS
FRONT LOCK READY
Factory installed lock
blank provides a visual
vandalism deterrent.
To further discourage theft, order
optional front panel lock assembly
(part #358290) for the added
security of tying the front and top
panels together.
1
⁄3 HP MOTOR
1
⁄3 HP motor with overload protection.
THERMOSTAT
Single operating thermostat for
simple accurate temperature control.
IMPROVED
AIRFLOW SYSTEM
Whirlpool
dryers have a new
Blower Housing Wave Insert to
increase air velocity up to 10%.
This increases efficiency, heating
element lifespan, and improves
*
fabric care.
*
Results per Whirlpool dryer testing conducted 7/03–8/04
LARGE CAPACITY METERCASE
Larger coinbox for reduced collections.
LARGE 7.4 CU. FT.
DRUM CAPACITY
The increased capacity
allows for large loads
of clothes to tumble and spread,
saving you and your customers
drying time and expense.
LARGE LINT FILTER
Pull-out, 84 square inch
lint filter.
4-WAY VENTING
4-Way venting from left or right
side, back or bottom.
SIDE SWING DOOR
For convenient access,
the wide-opening
side-swing door can
be opened a full 180°.
RUST PROOF SCREWS
Rust Proof Stainless Steel
Torx
give your machines
added security and service life.
®
commercial
®
control panel screws
COMMERCIAL DRYERS
Featuring Factory Installed
Coin Slide and Coin Box
CEM2750TQ — 27" Electric Dryer
CGM2751TQ — 27" Gas Dryer
with Factory Installed Coin Slide & Coin Box
• Large 7.4 Cu. Ft. Drum Capacity
• Push Button Controls with
Stainless-Look Console
• 3 Cycles: Regular/Heavy (High Heat),
Permanent Press (Medium Heat),
and Knits/Delicates (Low Heat)
• Large, Removable, Door-Mounted Lint
Screen (84 Sq. In.)
• 180 Degree Wide-Opening Side-Swing Door
• Porcelain Top, Powdered Paint Cabinet
• Front-Service Accessibility
• 4-Way, Multi-Vent Options
(Back, Bottom, and Sides)
• Electric Model Features Element Rated
at 5600 Watts, 240-Volt
• Gas Model Features a 22K BTU Burner
• Motor:
Protector; Centrifugal Switch Turns Off
Heating Element When Motor Stops
• Easy-to-Follow Console Instructions
• Power Cord Sold Separately
(Electric Model Only)
• 8 Quarter Coin Slide Capacity, Set Your
Dry Price From $0 – $2 Per Cycle
($1 Factory Preset)
• 3 Year Limited Parts Only Warranty
*Call 1–800–NO–BELTS for warranty details
1
⁄3-HP With Built-In Overload
NEW!
Factory
Installed
Top Lock
*
CW LL119
To locate a distributor near you, please visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-NO-BELTS
COMMERCIAL DRYER SPECIFICATIONS
DRYER SPECIFICATIONS
MODEL NUMBER CEM2750TQ
GENERAL INFORMATION
Stainless-Look Push Button Console, white
enamel drum, porcelain finish top, powdered
paint cabinet, front panel lock blank factory
installed, removable indoor lint filter,
improved meter case. 4-way venting
ELECTRICAL REQUIREMENTS
MOTOR
HEATER TYPE
HEATER/BURNER RATING
(Add 500 Watts Approx. for Motor on all
Dryer Models)
OPERATIONAL AMPERAGE
(Does not Include Control or Gas Valve)
DIMENSIONS
See Illustration Below
SHIPPING WEIGHT (EST.)
DRUM VOLUME
*Height at meter case top. **Burner orifices are available for manufactured, natural, mixed, and LP gas with
varying BTU ratings.
Energy information is available online at www.whirlpoolcommerciallaundry.com/products.
†
LP conversion Kit: 49572. ††Power cords on electric models sold separately.
Metercase Model
Factory Installed
Coin Slide
and Coin Box,
$0 – 2 per Cycle,
$1.00 Factory Preset
3-Wire Nominal 240/
208-Volt, 60 Hz, A.C.
Standard 30 Amps
Breaker/Fuse Branch
Circuit per Dryer (Subject
to Local Codes)
1
⁄3 HP Single Speed
Motor with Built-In
Overload Protector
5.9 Amps Max Rating
ELECTRIC GAS
Heater Rated
at 5600 Watts
Motor — 4.0 Amps No
load Heater 23.33 Amps
at 240 Volt 27.33 Total
*
43" H
, 27" W, 28.5" D 43" H*, 27" W, 28.5" D
134 Lbs. 135 Lbs.
7.4 Cu. Ft. 7.4 Cu. Ft.
††
CGM2751TQ
Metercase Model
Factory Installed
Coin Slide
and Coin Box,
$0 – 2 per Cycle,
$1.00 Factory Preset
Nominal, 120-Volt, 60Hz
A.C., Standard 15 Amps
Breaker/Fuse Branch
Circuit per Dryer
(Subject to Local Codes)
1
⁄3 HP Single Speed
Motor with Built-In
Overload Protector
5.9 Amps Max Rating
**
22,000 BTUh
Natural Gas
Motor — 4.0 Amps
No load
Exhaust Information
All dryers require the equivalent
†
of a 4-inch diameter exhaust duct.
Rigid metal duct is recommended.
Failure to properly exhaust the dryer
will result in improper operation.
27" & 29" Dryer Venting Requirements
# of 90° turns 4" Hood 2 1⁄2" Hood
Maximum length of 4" diameter rigid metal duct
0 64 Ft. 58 Ft.
1 54 Ft. 48 Ft.
2 44 Ft. 38 Ft.
3 35 Ft. 29 Ft.
4 27 Ft. 21 Ft.
Maximum length of 4" diameter flexible metal duct
0 36 Ft. 28 Ft.
1 31 Ft. 23 Ft.
2 27 Ft. 19 Ft.
3 25 Ft. 17 Ft.
4 23 Ft. 15 Ft.
Dimensions are for planning purposes only.
For complete information, see installation
instructions packed with product.
DRYER FRONT VIEW
DRYER BACK VIEW
CW LL119To locate a distributor near you, please visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-NO-BELTS