Whirlpool BLZS 7200/01 IN INSTALLATION

BLZS 7200
GB DE FR IT
Top shelf Second
shelf Bottom
shelf
Wire Shelf:
Baking tray:
Control panel
1.
2.
Cooling fan (not visible)
3.
The fan only switches on when the oven has reached a certain temperature, and may continue even after the appliance has been turned off, for a few minutes. Water drain nozzle
4.
Grill protector
5.
Prevents direct contact with the grill Make sure you do not touch the protector during oven operation. Upper heating element
6.
Steam injection pipe
7.
Core Probe insertion
8.
Rear oven lamp
9.
Circular heating element (not visible)
10.
Oven fan
11.
Lower heating element (hidden)
12.
Oven cool door
13.
ACCESSORIES
PRODUCT SHEET
Drip tray:
Steamer:
Core Probe:
Function
RAPID PRE-HEAT
CONVENTIONAL
GRILL OR TURBO
Oven function chart
Preset
temperature
200°C 50°C - 250°C
200°C 50°C - 250°C
3 1-5
3 1-5
Temperature
range
Description of function
To preheat the oven rapidly. When the set temperature is reached the function is automatically deactivated and an acoustic signal indicates automatic oven switching to the “Conventional” function ”. Ideal for cooking meat, fish and poultry.
Function suitable for cooking any kind of dish. P reheat th e oven to the required temperature and place the food in it when the acoustic signal indicates that the preset temperature has been reached.
To grill steak, kebabs and sausages, to cook vegetables au gratin and to toast bread. The “Grill” function can be adjusted from 1 to 5 to obtain different power levels. Preheat the oven for 3 - 5 min. During cooking the oven door must remain closed. When cooking meat, pour a little water into the drip-tray placed on the bottom shelf to reduce smoke and spattering of fat. Ideally the meat should be turned during cooking
To grill large joints of meat (roast beef and other roast meats). The “Turbo grill” function can be adjusted from 1 to 5 to obtain different power levels. Preheat the oven for 3 - 5 min. During cooking the oven door must remain closed. When cooking meat, pour a little water into the drip-tray placed on the bottom shelf to reduce smoke and spattering of fat. Ideally the meat should be turned during cooking.
1. ON/OFF - Function Selector Knob
2. Selection cancellation or back button
3. Confirmation button
5019 410 56335
CONTROL PANEL
1
2
3
4
4. Preset values modification (temperature/time/ levels) and Function Browse knob
5. Water filling drawer.
At the end of cooking, turn the function selector knob to “0”.
For cooking (without preheating) foods that require the
FORCED AIR
SPECIAL
MAXI COOKING
PASTRY
160°C
180°C
175°C 50°C - 250°C
5
SETTINGS
STEAM CLEAN
STEAM
50°C - 250°C
50°C - 250°C
same cooking temperature on one or more shelves (e.g.: fish, vegetables, cakes).
Consult the Programmer Sheet
To cook mostly large joints of meat (large roasts, turkey), ideally on one shelf only, preferably the first or second shelf from the bottom
To cook pastry or confectionery on one or more levels. The oven does not have to be preheated. Switch the position of food during cooking.
Consult the Programmer Sheet
Consult the Programmer Sheet
Consult the Programmer Sheet
COOKING TABLE FOR GRILL FUNCTION
FOOD Function
Steak X 4 5 30 - 40
Cutlets X 4 5 30 - 40
Sausages X 3 or 4 5 30 - 40
Chops Fish (steaks) X 3 or 4 5 30 - 40 Chicken legs X 3 or 4 5 40 - 50
Kebabs X 3 or 4 5 35 - 45
Spare ribs X 3 or 4 5 35 - 45
1/2 chicken X 3 5 45 - 55
Preheating (5 minutes)
X
Shelf
(from the bottom)
4 5 35 - 45
Power
level
COOKING TABLES
FOOD Function Preheating
MEAT
Lamb, Kid, Mutton
Roast
(Veal, Pork, Beef)
(kg. 1)
Chicken, Rabbit,
Duck
Turkey (kg. 4-6) + level 3
browning
Goose (kg. 2)
FISH
(WHOLE) (1-2 kg)
Gilt-head, Bass, Tuna,
Salmon, Cod
FISH (CUTLETS)
(1 kg)
Sword Fish, Tuna
VEGETABLES
Stuffed peppers and tomatoes
Shelf
(from the
bottom)
X 2 200 95 - 110 X 2 200 100 - 110
- 2 200 100 - 110 X 2 200 95 - 110 X 2 200 100 - 110
- 2 200 90 - 100 X 2 200 80 - 90 X 2 200 80 - 90
- 2 200 85 - 95 X 1 200 160 - 180 X 1 200 160 - 180
- 1 210 180 - 190 X 2 210 100 - 130 X 2 200 100 - 130
- 2 200 100 - 130 X 2 200 45 - 55
- 2 200 50 - 60
- 2 200 50 - 60 X 2 190 40 - 50
- 2 190 40 - 50
- 2 190 40 - 50 X 2 220 50 - 60
- 2 200 50 - 60
- 2 200 50 - 60
Temperature
(°C)
Cooking time
(minutes)
Cooking time
(minutes)
FOOD Function Preheating
Roast potatoes
SWEETS, PASTRIES, ETC.
Leavened cakes
Filled pies
(with cheese)
Tarts
Apple strudel
Biscuits
Choux buns
Savoury pies
Lasagna
Filled fruit pies
e.g. Pineapple, Peach
Meringues
Vol-au-vents
Soufflés
* Cooking on 2 Levels N.B.: Cooking times and temperatures are for guidance only.
Shelf
(from the
bottom)
X 2 220 50 - 60
- 2 200 50 - 60
X
- 2 170 40 - 50
- 2 170 40 - 50
X 2 180 80 - 90
- 2 170 70 - 80
- 2 170 80 - 90
X 2 190 40 - 50
- 2 180 40 - 50
- 2 180 40 - 50
X 2 200 50 - 55
- 1 and 3* 200 50 - 55
- 2 200 50 - 55
X 2 180 20 - 30
- 1 and 3* 170 20 - 30
- 2 170 20 - 30
X 2 180 35 - 45
- 1 and 3* 180 35 - 45
- 2 180 40 - 50
X 2 200 40 - 50
- 2 190 40 - 50
- 2 190 40 - 50
X 2 200 45 - 60
- 2 200 45 - 60
- 2 200 45 - 60
X 2 190 50 - 60
- 2 190 40 - 50
- 2 190 40 - 50
- 2 90 120 - 150
- 1 and 3* 90 120 - 150
- 2 90 120 - 150
X 2 220 35 - 45
- 1 and 3* 200 35 - 45
- 2 200 35 - 45
X 2 190 40 - 50
- 2 180 45 - 55
2 180 40 - 50
Temperature
(°C)
Cooking time
(minutes)
GB
Follow the instructions on the display
Description of the control panel
The Function knob is used to select the various oven functions. Each click of the knob corresponds to a function:
Display
from the display.
Steam
Steam Clean
Settings
Pastry
Maxi-Cooking
Turn the Function Selection knob (F) three clicks anticlockwise. The following message appears on the display “SETTINGS”.
Remove the protective film, if present,
F
Special
Press the cancel selection button “<<” to cancel the set operation and return to the previous screen.
Demo mode
If the message “Bauknecht” appears on the display and the oven starts in demo mode, the compartment heating elements are deactivated. To exit the Demo mode and restore normal oven operation, proceed as follows:
1. Disconnect the oven from the power supply and reconnect it within 60 seconds:
2. Turn the Function knob (F) to “Rapid heat”
3. Press the Cancel Selection button “<<”,
4. Turn the Function knob (F) to “0”,
5. Press the “OK” button”.
in demo mode, in steam ovens, cleaning functions are active.
N.B:
To use the cleaning functions, follow the procedure described in the steam sheet, using water instead of vinegar.
The “-/+” Browse knob has different uses, depending on the selected function:
• For browsing through the menus and the submenus
-/+
Once the desired settings appears on the display, confirm by pressing the “OK” button to proceed to the next step in programming.
• F or increasing/reducing the indicated values
• For browsing through the cooking functions
• For increasing/reducing the cooking time and temperature.
Safety Features
Child Safety with control panel lock To activate or deactivate the “Child Safety Lock”: Press the “<<” and “OK” buttons at the same time for at least 5 seconds.
If activated, the knobs and the buttons are locked and the display shows the symbol N.B: This function can also be activated during cooking
AUTO OFF device
For safety reasons, the oven switches off automatically (except for the Special function) after 4.5 hours of continuous operation.
Request for confirmation when the settings are changed
By turning the Function knob back to its original position the display will show the settings of the cooking cycle in progress. In any case, the oven continues the cooking cycle until the user confirms the change in settings. If the Function knob is turned during a cooking cycle, the oven requests confirmation of this choice in order to avoid accidental changes to the cooking settings.
Stand-by
To save energy, the display can be deactivated (display in OFF mode) by pressing the Cancel Selection button “<<” with the Function knob turned to “0”. To reactivate the display, press the button “<<” again with the Function knob turned to “0”.
Using the appliance for the first time
When switching the oven on for the first time, settings of the following values is requested
Set the required values with the “+/-” Browse knob and confirm the selection by pressing the “OK” button”.
SETTINGS
Turn the Function knob (F) three clicks anticlockwise. The message “SETTINGS” appears” Use the “+/-” Browse knob to modify the values. The following can be set in sequence: LANGUAGE (Available languages: ENGLISH (factory-settings),
Reset brightness and contrast settings. To restore the brightness and contrast factory
ENGLISH* DEUTSCH FRANCAIS NEDERLANDS
$llo.y
OK
settings: Turn the Function knob (F) to “0”. Turn the Function knob (F) to “SETTINGS”. Keep the “OK” button pressed for 5 seconds. In this way the factory-settings will be restored.
Restoring a language
To change a language that has been set mistakenly, proceed as follows:
1. Turn the Function knob to “SETTINGS”, select “Language” with the “+/-” Browse knob and confirm by pressing the “OK” button”.
2. Reselect the required language with the “+/-” Browse knob and confirm by pressing the “OK” button”.
Loading...
+ 5 hidden pages