Whirlpool AWZ 2413 INSTRUCTION FOR USE

AWZ 2413

QUICK REFERENCE GUIDE

Please also carefully read the “Instructions for Use”.

Very

Wet

Load

Indicative drying times

(in minutes)

75’

130’

70’

110’

Cotton

Mixed Fabrics

50’ 95’

25’ 45’

20’ 35’

15’ 30’

---

Airing

---

Time

Wet

Load

60’

100’

50’ 95’

45’ 75’

20’ 35’

15’ 30’

10’ 25’

Load

Fabric programmes

& Drying levels

3.0

6.0

3.0

6.0

3.0

6.0

1.0

2.5

1.0

2.5

1.0

2.5

Cotton

Max 6 kg

Mixed Fabrics

Max 2.5 kg

Airing

Drying options

Cupboard dry +

Cupboard dry *

Iron dry*

Cupboard dry +

Cupboard dry *

Iron dry

Laundry is aired and refreshed for 30 minutes without heating.

Completes drying or dries single items (suitable for all fabrics).

Gentle

Reduces drying

intensity

(recommended for delicate

items)

Signals/Sounds end of

Buzzer

drying cycle

at Intervals

Starts the drying

Start

Pause

Filter

Overdry protection

PROGRAMME SEQUENCE INDICATORS

Overdry Protection

Drying

End Anti-Crease

cycle. The drying indicator lamp is blinking during the selection phase. Press to confirm the final selection.

The indicator lamp lights up when the filter needs cleaning.

Clean the filter at the end of every cycle.

The indica tor lamp li ghts up when a humidity controlled program is selected, to indicate the working protection function. Function is not active in time controlled program s

and Airing.

Lit: Overdry protection is working

Blinking: programme selected; cycle need to be started. Lit: programme is running.

Lit: End of programme.

Lit: Anti-Crease is running.

* Test programmes according IEC 61121

5019 307 00290

PREPARING THE LAUNDRY SELECTING A PROGRAMME & OPTIONS

1. Check that all fastenings are closed and that pockets are empty.

2. Turn the articles inside out.

3. Place laundry loosely in the drum to make sure it doesn’t become tangled.

Sort laundry as follows:

A) By care symbols (on the collar or inside

seam):

Suitable for tumble drying

Programme and Options:

• To select a programme, turn the programme selector knob to the required position. The drying indicator lamp is blinking, indicating that the cycle needs to be started.

• To select an option, press the corresponding button. The indicator light in the button lights up confirming that the selection has been made.

• Press the option button again to cancel the

Tumble drying with reduced drying intensity only. Press Gentle button.

Do not tumble dry

B) By amount and thickness/weight

Whenever the load to be dri ed exceeds dryer capacity, separate laundry according to weight (e.g. towels from thin underwear).

C) By type of fabrics

Cotton/linen

: Towels, cotton jersey , bed and

table linen made of cotton or linen.

Synthetics/Easy Care

: blouses, shirts, overalls ,

option.

STARTING & COMPLETING A PROGRAMME

1. Having selected the desired programme and options, press the Start/Pause button.

If the laundry is not removed at the end of the drying cycle, an automatic anti-crease cycle will operate for maximum 60 min. The drum rotates at regular intervals , pr even ting the laundry from creasing.

2. On completion of the programme, set the

programme selector knob to position

CHANGING A PROGRAMME

etc. made of polyester or polyami de , as well as cotton/synthetic mixes.

D) By drying level

• Sort into: iron dry, cupboard dry, etc.

Do not tumble dry:

woollens, silk, nylon stockings, delicate embroidery, fabrics with metallic decorations, bulky items such as

When changing the programme during the drying cycle, the dryer stops. The drying indicator lamp is blinking.

To operate the new programme, press the Start/Pause button.

INTERRUPTING A PROGRAMME

sleeping bags, etc.

Important: only use specific indicated dryersafe additives

and rinse items that have been treated with stain remover thoroughly in plenty of water before drying.

indicated dryer-safe plastic items

Only use specific

and never dry rubber or articles contaminated with vegetable oil in the dryer

To interrupt the dryer during operation

1. Set the programme selector knob to Airing.

2. Press the Start/Pause button.

Wait at least 5 minutes before opening the door to allow the dryer to cool down.

For your safety the programme stops automatically if you open the door.

3. To restart, after door opening, close the door and press the Start/Pause button again.

“0”

DAILY MAINTENANCE & CLEANING

Clean the lint filter at the end of every drying cycle:

1. Open the door.

2. Pull the filter upwards.

3. Open the filter.

4. Remove lint using a soft brush or your fingertips.

5. Close the filter.

6. Push the filter back into place.

TROUBLESHOOTING GUIDE

If a fault occurs, before contacting our After-

AFTER-SALES SERVICE

If, after carrying out the above checks the malfunction persists or appears again, turn the dryer off and call our After-Sales Service (refer to guarantee).

Please specify:

• The nature of the fault.

• The dryer type and model.

• The service code (the number after the wo rd Service on the adhesive rating plate) on the right-hand side when the door is open.

• Your full address and phone number.

Sales Service, make the following checks to try and remedy the problem:

Drying takes too long / laundry is not dry enough:

• Was the correct programme selected?

• Was the inserted laundry too wet (Washing machine spin speed less than 800 rpm)?

• Is the lint filter dirty (filter indicator lamp on)?

The dryer does not operate: (after a power failure and/or interruption to

the mains supply, always press the Start/ Pause button).

• Is the plug properly inserted into the mains electricity socket?

• Is there a power failure?

• Has the fuse blown?

• Is the door properly closed?

• Has the programme been selected?

• Has the

Start/Pause

button been pressed?

Lint filter indicator lamp light on:

• Is the lint filter clean?

• Is the vent hose blocked?

All programme sequence indicators blinking:

• Service call necessary

5019 307 00290