Whirlpool AWZ 2411 INSTRUCTION FOR USE

GB
AWZ 2411
QUICK REFERENCE GUIDE
Please also carefully read the “Instructions for Use”.
Very
Wet
Load
Indicative drying times
(in minutes)
75’
130’
70’
Cotton
Synthetics
110’
50’ 95’
25’ 45’
20’ 35’
15’ 30’
Wet
Load
60’
100’
50’ 95’
45’ 75’
20’ 35’
15’ 30’
10’ 25’
Load
Kg
3.0
6.0
3.0
6.0
3.0
6.0
1.0
2.5
1.0
2.5
1.0
2.5
---
Airing
---
Time
* Test programmes according IEC 61121
Fabric programmes
Cotton
Max 6 kg
Synthetics
Max 2.5 kg
Airing
Drying options
Cupboard dry +
Cupboard dry *
Iron dry*
Cupboard dry +
Cupboard dry *
Iron dry
Laundry is aired and refreshed for 30 minutes without heating.
Completes drying or dries single items (suitable for all fabrics).
Reduces drying intensity
Gentle
(recommended for delicate
items)
-
-
Signals/Sounds end of
Buzzer
drying cycle
at Intervals
Start
Pause
Filter
Overdry protection
PROGRAMME SEQUENCE INDICATORS
Overdry Protection
Drying
End Anti-Crease
Starts the drying cycle. The drying indicator lamp is blinking during the selection phase. Press to confirm the final selection.
The indicator lamp lights up when the filter needs cleaning.
the filter at the end of every cycle.
The indicator l amp li ght s up when a humidity con tr olled pr ogra m is selected, to indicate the working protection function. Function is not active in time controlled pr ogr ams and Airing .
Lit: Overdry protection is working Blinking: programme selected;
cycle need to be started. Lit: programme is running.
Lit: End of programme. Lit: Anti-Crease is running.
5019 307 00345
Clean
PREPARING THE LAUNDRY SELECTING A PROGRAMME & OPTIONS
1. Check that all fastenings are closed and that pockets are empty.
2. Turn the articles inside out.
3. Place laundry loosely in the drum to make sure it doesn’t become tangled.
Sort laundry as follows:
A) By care symbols (on the collar or inside
seam):
Suitable for tumble drying
Tumble drying with reduced drying intensity only. Press Gentle button.
Do not tumble dry
B) By amount and thickness/weight
Whenever the load to be dri ed exceeds dryer capacity, separate laundry according to weight (e.g. towels from thin underwear).
C) By type of fabrics
Cotton/linen
table linen made of cotton or linen.
Synthetics/Easy Care
etc. made of polyester or polyami de , as well as cotton/synthetic mixes.
D) By drying level
• Sort into: iron dry, cupboard dry, etc.
Do not tumble dry:
stockings, delicate embroidery, fabrics with metallic decorations, bulky items such as sleeping bags, etc.
Important: only use specific indicated dryer­safe additives
treated with stain remover thoroughly in plenty of water before drying.
indicated dryer-safe plastic items
dry rubber or articles contaminated with vegetable oil in the dryer
: Towels, cotton jersey , bed and
: blouses, shirts, overalls ,
woollens, silk, nylon
and rinse items that have been
Only use specific
and never
.
Programme and Options:
• To select a programme, turn the programme selector knob to the required position. The drying indicator lamp is blinking “ “, indicating that the cycle needs to be started.
• To select an option, press the corresponding button. The indicator light in the button lights up confirming that the selection has been made.
• Press the option button again to cancel the option.
STARTING & COMPLETING A PROGRAMME
1. Having selected the desired programme and options, press the Start/Pause button.
If the laundry is not removed at the end of the drying cycle, an automatic anti-crease cycle will operate for maximum 60 min. The drum rotates at regular intervals , pr even ting the laundry from creasing.
2. On completion of the programme, set the
programme selector knob to position
CHANGING A PROGRAMME
When changing the programme during the drying cycle, the dryer stops. The drying indicator lamp is blinking “ “.
To operate the new programme, press the Start/Pause button.
INTERRUPTING A PROGRAMME
To interrupt the dryer during operation
1. Set the programme selector knob to Airing “ “.
2. Press the Start/Pause button. Wait at least 5 minutes before opening the
door to allow the dryer to cool down. For your safety the programme stops
automatically if you open the door. To r estart, after door opening, close th e door
3.
and press the Start/Pause button again.
“0”
DAILY MAINTENANCE & CLEANING
Clean the lint filter at the end of every drying cycle:
1. Open the door.
2. Pull the filter upwards.
3. Open the filter.
4. Remove lint using a soft brush or your fingertips.
5. Close the filter.
6. Push the filter back into place.
TROUBLESHOOTING GUIDE
If a fault occurs, before contacting our After­Sales Service, make the following checks to try and remedy the problem:
Drying takes too long / laundry is not dry enough:
• Was the correct programme selected?
• Was the inserted laundry too wet (Washing machine spin speed less than 800 rpm)?
• Is the lint filter dirty (filter indicator lamp on)?
The dryer does not operate:
.
(after a power failure and/or interruption to the mains supply, always press the Start/ Pause button).
• Is the plug properly inserted into the mains electricity socket?
• Is there a power failure?
• Has the fuse blown?
• Is the door properly closed?
• Has the programme been selected?
• Has the
Lint filter indicator lamp light on:
• Is the lint filter clean?
• Is the vent hose blocked?
All programme sequence indicators blinking:
• Service call necessary
Start/Pause
button been pressed?
AFTER-SALES SERVICE
If, after carrying out the above checks the malfunction persists or appears again, turn the dryer off and call our After-Sales Service (refer to guarantee).
Please specify:
• The nature of the fault.
• The dryer type and model.
• The service code (the number after the wo rd Service on the adhesive rating plate) on the right-hand side when the door is open.
• Your full address and phone number.
5019 307 00345
Loading...