GB
AWZ 231
6th Sense:
The double sensor
technology is
designed to ensure
optimum drying
results with minimum
energy consumption.
QUICK REFERENCE GUIDE
Please also carefully read the
“Instructions for Use” and the
“Installation” manuals.
Programmes
Max. 5 kg
Max. 2.5 kg
Laundry is aired for 30 minutes
without heating.
Time Programmes
Completes drying or dries single
items (suitable for all fabrics).
* Test programmes according IEC 61121.
Options
Reduces Drying Intensity
(recommended for
delicate items)
-----
-----
Signals/Sounds end
of Drying Cycle at
Intervals
Indicative
Drying Time
Spin Speed
Washing Machine
rpm
800
85’
120’
80’
110’
65’
90’
55’
75’
30’
40’
20’
35’
15’
30’
rpm
1000
-
-
-
-
20’
35’
15’
30’
10’
25’
rpm
1200
70’
100’
60’
90’
50’
75’
40’
65’
-
-
-
Max
Load
Kg
3.5
5.0
3.5
5.0
3.5
5.0
3.5
5.0
1.0
2.5
1.0
2.5
1.0
2.5
Start
(Pause)
Filter
Starts the drying cycle.
The indicator lamp lights up
when the dryer is on.
The indicator lamp lights up when
the filter needs cleaning.
the filter at the end of every
cycle.
PROGRAMME SEQUENCE INDICATORS
Drying
Cool
The programme sequence
Down
indicator lamps show the status
or the progress of the drying
End
cycle.
AntiCrease
5019 307 00015
Clean
PREPARING THE LAUNDRY SELECTING A PROGRAMME AND OPTIONS
1. Check that all fastenings are closed and that
pockets are empty.
2. Turn the articles inside out.
3. Place laundry loosely in the drum to make
sure it doesn’t become tangled.
Sort laundry as follows:
A) By care symbols
(on the collar or inside seam):
Suitable for tumble drying
Tumble drying with reduced drying
intensity only
Do not tumble dry
B) By amount and thickness/weight
Whenever the load to be dried exceeds dryer
capacity, separate laundry according to
weight (e.g. towels from thin underwear).
C) By type of fabrics
Cotton/linen
: Towels, cotton jersey, bed
and table linen made of cotton or linen.
Synthetics/Easy Care
: Blouses, shirts,
overalls, etc. made of polyester or polyamide,
as well as cotton/synthetic mixes.
D) By drying level
• Sort into: iron dry, cupboard dry, etc.
Do not tumble dry:
Woollens, silk, nylon
stockings, delicate embroidery, fabrics with
metallic decorations, bulky items such as
sleeping bags, etc.
Important: only use specific indicated dryersafe additives
and rinse items that have been
treated with stain remover thoroughly in plenty
of water before drying.
indicated dryer-safe plastic items
rubber or articles contaminated with
dry
vegetable oil
in the dryer
Only use specific
never
and
.
• To select a programme, turn the programme
selector knob.
• To select an option (if available), press the
corresponding button. The indicator lamp
above the button confirms that a selection
has been made. An alarm sounds if an
incorrect selection is made (incompatible
options).
Press the button again to cancel the option
•
STARTING AND COMPLETING A PROGRAMME
1. Having selected the desired programme and
options, press the Start button.
If the laundry is not removed at the end of
the drying cycle, an automatic anti-crease
cycle will operate for maximum 60 min. The
drum rotates at regular intervals,
preventing the laundry from creasing.
On completion of the programme, set the
2.
programme selector knob to position “0”.
The dryer indicator lamp “Start/Pause”
switches off.
CHANGING A PROGRAMME
When changing the programme during the
drying cycle, the dryer stops. The indicator lamp
of the Start/Pause flashes.
To operate the new programme, press the Start/
Pause button again.
INTERRUPTING A PROGRAMME
1. Set the programme selector knob to “Airing”.
2. Press the Start button.
Wait at least 5 minutes before opening the
door to allow the dryer to cool down.
For your safety the programme stops
automatically if you open the door.
To restart, after door opening, close the
3.
door and press the Start/Pause button
again.
FILTER
Clean the lint filter at the end of every drying
cycle:
1. Open the door.
2. Pull the filter upwards.
3. Remove lint using a soft brush or your
fingertips.
Push the filter firmly back into place
BUILT-IN INSTALLATION
.
1. It is recommended to not remove the
worktop.
Connect the dryer to an external ventilation
2.
system in order to prevent steam from
damaging your furniture during the years.
TROUBLESHOOTING GUIDE
If a fault occurs, before contacting our
After-Sales Service, make the following
checks to try and remedy the problem:
Drying takes too long / laundry is not dry
enough:
• Was the correct programme selected?
• Was the inserted laundry too wet (Washing
machine spin speed less than 800 rpm)?
• Is the lint filter dirty (filter indicator lamp
on)?
The dryer does not operate:
(following a power failure and/or
interruption to the mains supply, always
press the Start button).
• Is the plug properly inserted into the mains
electricity socket?
• Is there a power failure?
• Has the fuse blown?
• Is the door well closed?
• Has the programme been selected?
• Has the
Start/Pause
button been pressed?
Lint filter indicator lamp light on:
• Is the lint filter clean?
Is the vent hose blocked?
•
AFTER-SALES SERVICE
If, after carrying out the above checks the
malfunction persists or appears again, turn
the dryer off and call our After-Sales Service
(refer to guarantee).
Please specify:
.
• The nature of the fault.
• The dryer type and model.
• The service code (the number after the word
Service on the adhesive rating plate) on the
right-hand side when the door is open.
• Your full address and phone number.
5019 307 00015