Whirlpool AWOE 9349, AWOE 9549 INSTRUCTION FOR USE

30106397GB.fm Page 1 Tuesday, June 1, 2010 10:18 AM

GB

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B.“Service” indication

C.“Water tap closed” indication

D.“Clean pump” indication

PROGRAMME CHART

H

C

}

A

D

B

°C

L

I

K

0

J

E

F

G

E.Programme selector

F.“Start (Pause)” button

G.“Spin speed” button (with “Rinse hold” )

H.Programme sequence indication

I.“Reset/Drain” button

J.“Start delay” button

K.“Temperature” button

L.Display

Fabrics

Colours

Specials Eco

:

1)

Tempe-

Max.

Type of wash/Notes

Detergents and additives

Selectable options

Start

Spin

Care

Load

delay

Programme

Pre-

Main

Softener

Pre-

Eco

Easy

Intensive

Spin

Max.

rature

wash

wash

wash

ironing

rinse

speed

Spin

Labels

kg

- Respect the manufacturer’s recommendations on the care label

Speed

rpm

Mixed

20 - 60 °C

6.0

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.

—

Yes

—

—

max.

Effective one-hour programme. Make sure to wash only similar colours together in one wash load. If soil level

requires, add oxygen-based stain removers.

Cotton

20 - 95 °C

9.0

Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and linen.

Yes

max.

Synthetics

20 - 60 °C

3.5

Normally soiled blouses, shirts, overalls, etc. made of polyester (Diolen, Trevira), polyamide (Perlon,

Yes

max.

Nylon) or blends with cotton.

Delicates

20 - 40 °C

2.5

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Yes

—

—

—

1000 1)

Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles made of

Wool/Handwash

20 - 40 °C

2.0

silk, linen, wool and viscose marked as handwashable.

—

Yes

—

—

—

—

1000 1)

This programme is tested and approved by The Woolmark Company for machineand handwashable wool.

Select spin speed according to the manufacturer's recommendations on the care label.

White

20 - 60 °C

9.0

Normally to heavily soiled and robust white cotton laundry.

—

Yes

—

—

—

—

max.

Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition to your detergent.

Light colours

20 - 60 °C

6.0

White and pastel shaded garments made of delicate fabrics.

—

Yes

—

—

—

—

1000 1)

Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if necessary also

stain removers or bleaches on oxygen basis. Do not use liquid detergent.

Dark

20 - 60 °C

6.0

Black and dark garments made of cotton, cotton blends and polyester.

—

Yes

—

—

—

1000 1)

Special programme to reduce colour fading and local discolouration. Prefer to use a special liquid detergent for

dark garments with this programme.

Normally to heavily soiled and robust underwear, table and bed linen, towels and shirts made of cotton and linen.

SuperEco

20 - 60 °C

9.0

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to

—

Yes

—

—

—

max.

additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0”

and start spin programme in the morning, or define programme start with “Start delay” accordingly.

AquaEco

20 - 40 °C

3.0

Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.

—

Yes

—

—

—

—

—

max.

Saving programme with a very low water consumption. Use liquid detergent and the lowest recommended

amount for 3kg laundry. Do not use softener.

Speed 15

20 - 30 °C

3.0

Briefly worn clothing made of cotton, artificial fibers and blends with cotton.

—

Yes

—

—

—

—

max.

Refresh programme. Use lowest recommended detergent amount.

Bedlinen

20 - 95 °C

3.5

White and coloured bedlinen made of cotton and synthetic fibres, or blends of both.

—

Yes

—

—

—

max.

Reduces microbes and gently cleans, also delicate bedlinen, A thorough rinse phase helps to prevent detergent and

pollen residues. Prefer powder detergent for this programme.

Big Items

20 - 60 °C

3.0

Blankets made of synthetic fibres; bedcovers filled with feathers, polyester or other artificial fibres;

Yes

—

—

1000 1)

sleeping bags, bathmats and similar items.

Rinse & Spin

—

—

9.0

Rinse and intensive spin programme.

—

—

—

—

—

max.

Same as the last rinse and the final spin in the “Cotton” programme.

optional / Yes : dosing required

The wool/handwash cycle of this machine has been tested and approved by The Woolmark Company for the washing of

Whirlpool is a registered trademark of Whirlpool USA

For improved garment care, spin speed is restricted in this programme.

Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the

instructions on the garment label and those issued in this programme chart. M0702

5019 301 06397

Black process 45.0° 150.0 LPI

30106397GB.fm Page 2 Tuesday, June 1, 2010 10:18 AM

The Sensor Technology automatically adapts Programme Time, Water and Energy consumption to the size of your wash load.

CONSUMPTION DATA

	Programme	Temperature	Load	Water	Energy	Approx. Programme Duration
		(°C)	(kg)	(l)	(kWh)	(hours : minutes)*
	Mixed	40	6.0	73	0.60	1:00
	Cotton	95	9.0	87**	2.60	2:20
	Cotton	60	9.0	64	1.53	2:30
	Cotton with “Eco”***	60	9.0	64	1.17	4:00
	Cotton	40	9.0	82	0.80	2:15
	Synthetics	60	3.5	46**	0.85	1:35
	Synthetics	40	3.5	42	0.50	1:20
	Delicates	30	2.5	60	0.40	0:45
	Wool/Handwash	40	2.0	45	0.60	0:40
	White	40	9.0	82	0.90	2:30
	Light colours	40	6.0	70	0.50	1:20
	Dark	40	6.0	49	0.60	1:40
	SuperEco	60	9.0	80	1.08	4:00
	AquaEco	40	3.0	19	0.45	1:00
	Speed 15	30	3.0	30	0.20	0:15
	Bedlinen	60	3.5	60	1.30	2:00
	Big Items	40	3.0	74	0.75	1:30

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

*The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

***Reference Programme for Energy Label (with separator in detergent dispenser removed for use of powder detergent).

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Load your laundry, close the door properly and add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use (remove separator in detergent dispenser for use of powder detergent if necessary).

1.Turn the programme selector to the desired programme. The display shows the programme duration in hours and

minutes as well as the predefined temperature. The “Start (Pause)” button blinks.

2.The temperature can be altered by pressing the “Temperature” button.

3.The indication lamp of the predefined spin speed lights up. In

case you want to set another spin speed, press the “Spin speed” button .

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up.

When the combination of programme and option is not possible, the lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

•Only for heavily soiled loads (for example sand, granular dirt). Increases the cycle time by approximately 15 min.

•Do not use liquid detergent for the main wash when activating the Prewash option.

“Eco” button

•With a modified temperature profile and a prolonged washing duration, the optimum combination of good washing result and lower energy consumption is achieved.

“Easy ironing” button

• Reduces creasing by an increased water quantity and a very gentle spin.

“Intensive rinse” button

•More water is added and rinse cycle is prolonged.

•This option is particularly suitable for areas with very soft water, washing baby linen and helping people with allergies.

“Spin speed” button (incl. “Rinse hold” )

•Every programme has a predefined spin speed.

•Press the button to set another spin speed.

•If you select spin speed “0”, the final spinning is cancelled, and the water is drained out only. However, intermediate spin phases remain during rinse.

•If you select “Rinse hold” , the laundry remains in the last rinse water without progressing to the final spin cycle to

avoid creasing and prevent colours from changing.

-Select “Rinse hold” if you want to postpone spinning to a later time or if you want to drain only.

-Do not leave the laundry to soak in the rinse hold for too long.

-The programme stops to “Rinse hold” when the “Rinse hold” light in the programme sequence indicator is on. The “Start (Pause)” button light blinks.

-To terminate the “Rinse hold” by draining the water, without any spinning, press the “Start (Pause)” button .

-To terminate the programme by spinning the laundry, press the

“Spin speed” button to select the desired spin speed and then the “Start (Pause)” button to start the spin cycle.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

•Select programme, temperature and options.

•Press the “Start delay” button to select a delay time up to 23 hours. The light of the “Start (Pause)” button blinks.

•Press the “Start (Pause)” button . The countdown of

the delay time begins. The light of the “Start (Pause)” button

is on. The light of the start delay button will keep blinking until the programme starts.

•As soon as the programme starts, the start delay on the display is replaced by the remaining programme time, and the light of the “Start delay” button goes off.

•Once having pressed the “Start (Pause)” button , the number of hours preselected can be changed by pressing and holding the “Start delay” button.

To cancel the “Start delay”

...before you press “Start (Pause)” :

• Turn the programme selector to another position or press the

“Reset/Drain” button .

...after having pressed “Start (Pause)” :

•Press “Start (Pause)” - the delay time disappears from the display. Press “Start (Pause)” again to start the selected programme immediately.

PROGRAMME START

Open the tap and press “Start (Pause)” . The light stops blinking and is on. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the display.

CHILD LOCK

Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock:

•Turn the programme selector to a programme position, or run a programme as usual.

•Press the 2 buttons marked with the key symbol simultaneously for at least 3 seconds. A key-like symbol will shortly

appear on the display to indicate that the child lock is active.

Any time you try to change a programme setting with active child lock, the display will briefly show the key-like symbol. The programme setting cannot be changed anymore. The only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock:

•Press again the 2 buttons marked with the key symbol simultaneously for at least 3 seconds.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Reset a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use. If the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap. If the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned. In the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

•The display shows “End” and the “Door open” indication lights.

1.Turn the programme selector to the “Off/O” position.

2.Close the water tap.

3.Open the door and unload the machine.

4.Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1.Press “Start (Pause)” to pause the programme. The light blinks.

2.Select the new programme, temperature, any options and another spin speed if you want.

3.Press “Start (Pause)” again. The light is on, and the programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

RESET A RUNNING PROGRAMME BEFORE THE END

The “Reset/Drain” button cancels a programme before the end.

•Press the “Reset/Drain” button for at least 3 seconds. “rES” appears on the display. The water is drained out; it may last a while until you can open the door.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06397

Black process 45.0° 150.0 LPI