Whirlpool AWOE 9512 Product Sheet

GB PROGRAMME CHART

Whirlpool is a registered trademark of Whirlpool USA

A. “Door open” indication

This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately, e.g.:

B. “Service” indication

C. “Water tap closed” indication
D. “Clean pump” indication

E. Programme selector
F. “Start/Pause” button

G. “Spin” button (with “Rinse hold” )

H. Eco monitor

I. “Reset/Drain” button
J. “Cycle end” button
K. “Temperature” button

L. Child lock button combination
M. “Favourites” button

D

C

F

B

A

G

H

I

}

K

}

J

L

E

M

/

Fabr ics
Colour s

Eco
Specials

Programme

Mixed Diario XL cold - 60 °C 6.0

Cotton Algod. cold - 95 °C 9.0

Synthetics Sintéticos cold - 60 °C 3.5

Delicates Delicados cold - 40 °C 2.5

Wool/

Handwash

White

Light

colours

Dark

Eco Cotton Eco Algod. cold - 60 °C 9.0

Aqua Eco Aqua Eco cold - 40 °C 3.0

Speed 15’ Rápido 15’ cold - 30 °C 3.0

Jeans Jeans cold - 60 °C 5.0

A mano/

mão

Blanco/

Branco

Claros/

Claras

Oscuros/

Escuras

Big Items Edredón cold - 60 °C 3.0

Rinse & Spin

❉: optional / Yes : dosing required

1)

For improved garment care, spin speed is restricted in this programme.

Aclar./enx. &

Centrif.

Max.

Tem pe -

rature

cold - 40 °C 2.0

cold - 60 °C 9.0

cold - 60 °C 6.0

cold - 60 °C 6.0

Care

Labels

——

Load

kg

9.0

Type of wash/Notes

- Respect the manufacturer’s recommendations on the care label

Lightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.

Effective one-hour programme. Make sure to wash only similar colours together in one wash load.

Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton
and linen.

Normally soiled garments made of artificial fibres (like polyester, polyacryle, viscose etc.)
or their blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Woollens, labelled with the Woolmark and identified as machine washable, as well as
textiles made of silk (keep to care label!), linen, wool and viscose marked as handwashable.

This programme is tested and approved by The Woolmark Company for machine- and
handwashable wool.

Normally to heavily soiled and robust white cotton laundry.

Save energy by selecting a lower wash temperature and adding an oxygen-based bleach
product, in addition to your detergent.

White and pastel shaded garments made of delicate fabrics.

Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty
detergent, if necessary also stain removers or bleaches on oxygen basis.

Black and dark garments made of cotton, cotton blends and polyester.

Special programme to reduce colour fading and local discolouration. Prefer to use a special
liquid detergent for dark garments with this programme.

Normally soiled cotton laundry.

At 40°C and 60°C most favourable programme in terms of combined water and energy
consumption. Reference programme for the Energy Label.

Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.

Saving programme with a very low water consumption. Use liquid detergent and the lowest
recommended amount for 3kg laundry. Do not use softener.

Briefly worn clothing made of cotton, artificial fibres and blends with cotton.

Refresh programme. Use lowest recommended detergent amount.

Normally soiled cotton jeanswear and garments made of robust jeanslike material such
as trousers and jackets.

Blankets made of synthetic fibres; bedcovers filled with feathers, polyester or other
artificial fibres; sleeping bags, bathmats and similar items.

Rinse and intensive spin programme.

Same as the last rinse and the final spin in the “Cotton” programme.

The wool/handwash cycle of this machine, at 40 °C, has been tested and approved by The Woolmark Company
for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments
are washed according to the instructions on the garment label and those issued in this programme chart. M0702

Detergents and additives Selectable options Cycle

Pre-

Main

wash

—

❉

❉

❉

—

—

❉

❉

—

—

—

❉

❉

Softener Colours 15°

wash

Yes

❉❉—— — ❉❉ ❉

Yes

❉❉❉❉❉❉❉ ❉

Yes

❉❉❉❉❉❉❉ ❉

Yes

❉❉— ❉ ——❉❉

Yes

❉❉—— — — ❉❉

Yes

❉❉—— ❉❉❉ ❉

Yes

❉❉— ❉❉ — ❉❉

Yes

❉❉❉❉— ❉❉ ❉

Yes

❉❉—— — ❉❉ ❉

Yes

— ❉ —— — — ❉❉

Yes

❉❉—— — — ❉❉

Yes

❉❉❉❉❉❉❉ ❉

Yes

❉❉— ❉ — ❉❉ ❉

—— ❉ ———— ❉❉ ❉

Colours 15°

Rapid

Rápido

Pre-

wash

Prelav.

Clean +

Clean +

Intensive

Aclar./enx.

intensivo

rinse

end

Fin

diferido

5019 301 06652

Spin speed

Centrif.

Spin

Max.
Spin

Speed

rpm

max.

max.

max.

1000

1000

max.

1000

1000

max.

max.

max.

1000

1000

max.

1)

1)

1)

1)

1)

1)

Whirlpool is a registered trademark of Whirlpool USA

CONSUMPTION DATA

* Reference programmes for Energy Label.

less more

Programm e

Mixed 40 6.0 65 0.65 1:00 —
Cotton 95 9.0 90** 2.60 2:30 —
Cotton 60 9.0 64 1.53 2:20 1:35
Cotton 40 9.0 82 0.85 2:05 1:15

Synthetics 60 3.5 48** 0.95 1:35 1:10
Synthetics 40 3.5 45 0.55 1:20 0:55

Delicates 40 2.5 60 0.65 0:50 —

Wool/Handwash 40 2.0 45 0.60 0:40 —

White 40 9.0 85 0.85 2:20 —

Light colours 40 6.0 70 0.50 1:20 —

Dark 40 6.0 49 0.60 1:40 1:15
Eco Cotton* 60 9.0 64 1.17 4:00 —
Eco Cotton* 60 4.5 44 0.90 3:10*** —
Eco Cotton* 40 4.5 44 0.85 3:15*** —

Aqua Eco 40 3.0 19 0.45 1:00 —
Speed 15’ 30 3.0 30 0.20 0:15 —

Jeans 40 5.0 60 0.50 1:30 1:10

Big Items 40 3.0 70 0.75 1:30 —

Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual
water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx.
15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water
supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature.
Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options
or changing the spin speed will also change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).

** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.
*** Automatic adaptation of programme duration after detection of wash load.

ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME

Load your laundry, close the door properly and add detergent as
indicated on the front page and as described in the chapter
“Detergent and Additives” in your Instructions for Use.
Turn the programme selector to the desired programme. The
display shows the programme duration in hours and minutes as
well as the predefined temperature. The “Start/Pause” indicator

blinks. The temperature and spin speed can be altered by

pressing the “Temperature” or the “Spin” button.

SELECT ANY DESIRED OPTION

Push the button of any option desired - the indicator lights up.
If the combination programme/option or option/option is not
possible, the indicator switches off automatically. For certain
programmes, an option may already be preset; if you want you
can deselect it.

“Colours 15°” button

• Saves energy used for water heating while maintaining a
good wash result.

• Supports colour maintenance when washin g coloured laundry.

• Recommendable for lightly soiled laundry without stains.

• Make sure that your detergent is suitable for cold wash
temperatures (15 or 20°C).

• Not selectable for Cotton 70 - 95°C.

“Rapid” button

• Enables quicker washing by shortening the programme duration.

• Recommendable for only lightly soiled laundry.

• Not selectable for Cotton 70 - 95°C.

“Prewash” button

• Adds a prewash cycle to the wash programme selected;
prolongs the programme by about a quarter of an hour.

Tem pe ra tu re

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

• Recommended for heavily soiled laundry (e.g. containing

• Do not use liquid detergent for the main wash when

“Cle an +” butt on

• Choose this option if you use an in-wash additive for stain removal

• Use with maximum load preferably.

• Add an appropriate amount of in-wash additive for stain

• May prolong the programme by up to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

“Spin speed” button (incl. “Rinse hold” )

• Press the button to change the predefined spin speed.

• If you select spin speed “0”, the final spinning is cancelled,

•If you select “Rinse hold” , the laundry remains in the

Approx. Programme Duration (hours : minutes)

without “Rapid” with “Rapid”

sand or granular dirt).

activating the Prewash option.

(powder, for example “Vanish”) - it will optimize the additive’s
efficiency to get better wash performance and stain removal.

removal (powder) to the main wash chamber, together with
your detergent (only use powder detergent with this option).
Respect the manufacturer’s dosing instructions.

basis. Chlorine or perborate bleaches must not be used!

water, washing baby linen and helping people with allergies.

and the water is drained out only. However, intermediate
spin phases remain during rinse.

last rinse water without progressing to the final spin cycle to
avoid creasing and prevent colours from changing.

-Select “Rinse hold” if you want to postpone spinning to
a later time or if you want to drain only.

- The programme stops to “Rinse hold” when the “Rinse hold”

indicator blinks. The “Start/Pause” indicator also blinks.

- To terminate the “Rinse hold” by spinning the laundry,
press “Start/Pause” - the laundry will be spun with the
default spin speed. You can also select another spin
speed with the “Spin” button before you start the spin
cycle with “Start/Pause”.

- To terminate the “Rinse hold” by draining the water without
spinning, press the “Spin” button until indicator of spin speed
“0” lights up; then press “Start/Pause” to start the draining.

- Do not leave the laundry to soak in the rinse hold for too
long (especially silk).

SET CYCLE END

With this function you can postpone your programme to complete
at a later time: press the button to select in how many hours the
programme shall be finished. Thus, it allows you to have your
laundry ready at a particular time and to profit from more favourable
energy rates during the night, for example.

• Do not use liquid detergent when activating this function.

• The time until the “Cycle end ” can be selecte d in full hour ti me
segments (1 to 24 h). When you press the button, the shortest
pos sible t ime wi ll be di splay ed; kee p on pr essin g the bu tton t o
loop through all the available times. To remove it again, keep
on pressing the button until you see the value “0:00”.

• When you have selected the desired time until the “Cycle
end”, press “Start/Pause” - the countdown will begin.

• During the countdown, you can still modify the programme
setting (select or deselect options, chang e spin speed etc.) . If
the modifications prolong the programme duration so that it
overruns the originally set time until the “Cycle end”, the
programme will start immediately.

• Sometimes the programme may finish before the selected
time until the “Cycle end” has expired (e.g. for small loads). In
this case, the washing machine will tumble the laundry
regularly to keep it fresh, until the selected “Cycle end” time
has expired. During tumbling, the display will show an
animation. The tumbling phase can be stopped at any time
either by pressing any button or by rotating the programme
selector; the animation will stop and the door will unlock in
about 1 minute as indicated on the display.

“DOOR OPEN” INDICATOR

Before starting and after end of a programme, the indicator lights to
show that the door can be opened. As long as a wash programme is
running, the door remains locked and must on no account be forced
open. In case you have an urgent need to open it during a running
programme, refer to “Reset a running programme before the end”.

ECO MONITOR

The “Eco monitor” gives you a rough feedback about the power
consumption of the programme setting you selected.
As soon as you turn the programme selector to any programme, the
“Eco monitor” is on.

The indicator on the left is to show that the “Eco monitor” is active.
The four indicators next to it show the degree of consumption: the
less power your programme setting is forecasted to consume, the
less indicators will light up. This depends on the programme,
temperature and options selected, and also on the size of the wash
load. For that reason, the forecasted degree of power consumption
may adapt when the washing machine detects the wash load.

PROGRAMME START

Open the tap and press the “Start/Pause” button . The
“Start/Pause” indicator lights up. When the laundry load is

detected or the programme duration is adapted, the display
shows an animation.

CHILD LOCK

Prevents children from starting a wash cycle or changing the
settings of a running programme. Cannot be activated or
deactivated when the programme selector is in the “Off/O”
position. To activate the child lock:

• Turn the programme selector to a programme position, or
run a programme as usual.

• Press the 2 buttons marked with the key symbol
simultaneously for at least 3 seconds. A key-like symbol will shortly
appear on the display to indicate that the child lock is active.

Any time you try to change a programme setting with active
child lock, the display will briefly show the key-like symbol. The
programme setting cannot be changed anymore. The only
change possible is to switch the washer off by turning the
programme selector to the “Off/O” position. To deactivate the
child lock proceed in the same way as for activating it.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the
appliance offers the possibility to save one setting for each
programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed and
option(s), press and hold the “Favourites” button for a
few seconds. The “Favourites” indicator briefly blinks
and then lights up - the programme setting is saved.

Next time you want to use your individual programme setting,
select the programme, briefly push the “Favourites” button
and start by pressing “Start/Pause” .
If you want to replace the saved programme setting by another
one, proceed as already described above - the previous setting
will be replaced by the new one.

FAILURE INDICATORS

If one of the failure indicators blinks, refer to the
“Troubleshooting Guide” in your “Instructions for Use”.

Spin speed indicator blinks: Unbalance during spinning.

PROGRAMME END

• The “Door open” indicator lights up. The display shows

“End”.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press “Start/Pause” to pause the programme. The light

blinks.

2. Select the new programme, temperature, any options and

another spin speed if you want.

3. Press “Start/Pause” again. The new programme continues

at the same position where the previous programme was
interrupted. Do not add detergent for this programme.

RESET A RUNNING PROGRAMME BEFORE THE
END

The “Reset/Drain” button cancels a programme before
the end.

• Press the “Reset/Drain” button for at least 3

seconds. “rES” appears on the display. The water is drained;
it may last some time until you can open the door.

5019 301 06652