Whirlpool AWOE 91400 STEAM INSTRUCTION FOR USE

30106307GB.fm Page 1 Tuesday, July 7, 2009 12:56 PM

GB PROGRAMME CHART

A. Programme selector B. Display C. “Temperature” button

D. “Variable spin” button

(incl. “Rinse hold” )

E. “Start delay” button F. “Start (Pause)” button G. “Reset/Drain” button H. “Favourites” button

Programme

Coton

Cotton Couleurs

Tempe-

rature

Care

Labels

70 - 95 °C 9.0

20 - 60 °C

Max

Load

9.0

Type of wash/Notes

- Respect the manufacturer’s recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

}

K G

C D

E H

Detergents and additives Selectable options Start

Pre-

Main

wash

Yes

❉

Sof-

Pre-

wash

Eco Easy

tener

❉❉❉❉❉ ❉ ❉ ❉❉

Add garment Programme

J. “Child lock” indication K. “Detergent overdosage” indication

L. Red failure indications

iron-

ing

Inten-

sive

rinse

2) 2)

I. Programme sequence indication

in process

Programme

finished

delay

Varia-

ble

spin

Spin

Max Spin

Speed

rpm

max.

Synthetics Synthétique

Delicates Délicat

Wool Laine

Handwash

Jeans Jeans

Lavage

main

20 - 60 °C

20 - 40 °C

20 - 40 °C 2.0

20 - 60 °C

—

———

20 - 60 °C 9.0

20 - 60 °C

20 - 30 °C

Rinse & Spin

Spin Essorage

❉

optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Selectable only within temperature range of 40 to 60°C.

Rinçage &

Essorage

—— ——

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide

3.5

(Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

2.5

Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The W oolmark Comp any for machine wash able wool.

Textiles made of silk, linen, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.

Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers

7.0

and jackets. Clean and dry laundry items made of cotton and/or synthetics which were already used.

Refreshes, reduces smells, moderates creasing and makes the items ready to wear or use within 20 minutes.

1.0

After programme end, immediately put the lau ndry on han gers for 10 minut es before using. During this programme “St” appears on the display.

Self-cleaning programme. Cleans the interior of your washing machine and thus helps to avoid smells or deposits. Run this programme regularly if you never or seldom wash your laundry at temperatur es over 60°C or if your washing machine has not been in use for a long time.

laundry!

During this programme “St” appears on the display .

Slightly to normally soiled bed linen, table linen and underwear , towels, sh irts etc. made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.

Slightly to normally soiled textiles made of cotton and/or synthetics.

6.0

Briefly worn outer clothing made of cotton, artificial fibers and blends with cotton.

6.0

Same as the last rinse and the final spin in the “Cotton” programme.

9.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

9.0

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702

IMPORTANT: Do not load any

Yes

❉ ❉

—

❉

❉❉❉❉❉ ❉ ❉ ❉❉

Yes

❉❉

Yes

❉

Yes

❉

Yes

❉❉❉

—— — — —

———— — —

——

❉❉❉❉

——————— — —

Yes

—

Yes

—

Yes

— ——

———

❉

——

❉

———— — —

❉

———

❉

❉❉

❉

——

——————— — —

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06307

❉❉ ❉❉

❉❉

——

❉

——

❉

❉❉

❉❉ ❉❉

❉❉

max.

1000

400

max.

max. max.

max.

Black process 45.0° 150.0 LPI

30106307GB.fm Page 2 Tuesday, July 7, 2009 12:56 PM

CONSUMPTION DATA

Programme

Cotton 60 9.0 82 1.71 2:20

Cotton with “Eco”

Cotton 40 9.0 82 0.80 2:15 Synthetics 60 3.5 46 Synthetics 40 3.5 42 0.50 1:20

Delicates 30 2.5 60 0.40 0:45

Handwash

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions applicable at that time. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. *** Reference Programme for Energy Label (with separator in detergent dispenser removed for use of powder detergent).

***

Wool 40 2.0 60 0.60 0:45

Jeans 40 7.0 95 0.85 2:31

Tem per at ure

(°C)

95 9.0 87

60 9.0 64 1.53 2:30

40 2.0 45 0.60 0:40

— 1.0 0.5 0.20 0:10 — — 11 0.50 0:35 60 9.0 80 1.08 4:00

40 6.0 73 0.60 1:00

30 6.0 73 0.30 0:30

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use (remove separator in detergent dispenser for use of powder detergent if necessary). Turn the programme selector to the desired programme; the light of the

“Start (Pause)”

indicated on the display can be altered by pressing the

speed

“Temperature” button or the “Variable spin” button.

button blinks. The

temperature

SELECT ANY DESIRED OPTION

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the “Prewash” option.

“Eco” button

• With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.

“Easy ironing” button

• Makes ironing easier by an increased water quantity and a very gentle spin.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water or for washing baby linen, and helps people with allergies.

and

Load

(kg)

spin

Water

(l)

“Steam Stain Removal” button

• Treats the laundry with hot steam during the wash cycle in order to help removing stains.

• Selectable for laundry made of cotton and/or synthetics within temperature range of 40 to 60°C.

• If you select this option, “St” appears on the display during the steam phases.

“Steam Sanitization” button

• Eliminates bacteria and helps sanitizing the laundry.

• Selectable for cotton and/or synthetic laundry items with care label within temperature range of 40 to 60°C; do not load more than 6kg cotton laundry when activating this option.

• Prolongs the programme by approximately half an hour to an hour, depending on the load size.

• If you select this option, “St” appears on the display during the steam phases.

“Variable spin” button (incl. “Rinse hold” )

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

• If you select “Rinse hold” , the laundry remains in the last rinse water without progressing to the final spin cycle, to avoid creasing and prevent colours from changing. To activate the “Rinse hold” press the “Variable spin” button repeatedly until the “Rinse hold” symbol on the display lights up.

- The wash programme stops to “Rinse hold” when the

- To terminate the “Rinse hold” by draining the water,

Energy

(kWh)

2.60 2:20

0.85 1:35

“Rinse hold” symbol on the display blinks; the light of

“Start (Pause)”

without any spinning, press the

Approx. Programme Duration

(hours : minutes)

button blinks as well.

“Start (Pause)”

button.

- To terminate the programme by spinning the laundry, press the “Variable spin” button to select the desired spin speed and then

“Start (Pause)”

- Do not leave the laundry to soak for too long in the “Rinse hold”.

to start the spin cycle.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed and option(s), push and hold the seconds. The lamp of the then lights up - the programme setting is saved.

Next time you want to use your individual programme setting, select the programme, start by pushing If you want to replace the saved programme setting by another one, proceed as already described above.

“Start (Pause)”

“Favourites”

shortly

“Favourites”

push the

button for at least 3

button shortly blinks and

“Favourites”

button and

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

• Select programme, temperature, spin speed and options.

• Press the Start delay button to select one of the delay time steps between 0:30 and 23:00 hours.

•Press the

• The time delay indication disappears when the programme

To cancel the “Start delay” ..before you press the “Start (Pause)” button:

• Press the

..after having pressed the “Start (Pause)” button:

Press the the display; press programme immediately.

“Start (Pause)”

becomes solid. The countdown of the delay time begins; the clock symbol next to the delay time and the colon between hours and minutes blink.

starts and it is replaced by the remaining programme time.

“Reset/Drain”

“0:00” - the delay time disappears after a few secon ds.

“Start (Pause)”

button; the light stops blinking and

button, or set the start delay time to

button - the delay time disappears from

again to start the selected

“ADD GARMENT” INDICATION

Before starting a programme, the symbol lights to show that the door can be opened to add more washing. As soon as you press

“Start (Pause)”

programme and must on no account be forced open. In case you have to open it urgently during a running programme, refer to “Reset a running programme before the end”. If you try to start a wash programme and the door is not properly closed, the “Add garment” indication will blink.

, the door will lock until the end of the

PROGR AMME START

Open the tap and press the

“Start (Pause)”

garment” indication goes out, and the lit bubbles indicate that the programme is in process. In some phases, the remaining programme time is newly calculated - if this is the case, the “6 sense” indication on the display will fade, and the remaining programme time is replaced by an animation.

button light becomes constant. The “Add

“Start (Pause)”

button; the blinking

CHILD LOCK

Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock:

• Turn the programme selector to a programme position, or run a programme as usual.

• Press the “Temperature” and the “Variable spin” button simultaneously for at least 3 seconds. The “Child lock” symbol

will shortly blink and then light up to indicate that the

child lock is active.

The programme setting cannot be changed anymore; the only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock, proceed in the same way as for activating it.

RED FAILURE INDICATIONS

If one of the red failure indications on the display lights up, refer to the “Troubleshooting Guide” in your “Instructions for Use”.

PROGRAMME END

• The display shows “End”, and the “Programme finished”

indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

• Leave the door ajar to allow the drum to dry.

• If you do not turn the programme selector to the “Off / O” position, all lights of the control panel go out after a few minutes to save energy - only “End” will remain on the display.

DETERGENT OVERDOSAGE INDICA TION

The symbol will light up at the end of the programme if you used too much detergent. Use less detergent next time. If the symbol lights up and the display shows “Fod”, too much foam interrupted the wash process; refer to the “Troubleshooting Guide” in your Instructions for Use.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

2. Select the new programme, temperature, any options and

3. Press the

“Start (Pause)”

The light blinks.

another spin speed if you want.

“Start (Pause)”

continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

button to pause the programme.

button again. The new programme

RESET A RUNNING PROGRAMME BEFORE THE END

The

“Reset/Drain”

•Press the

animation appears on the display. Any existing water is drained out before the door can be opened.

button cancels a programme before the end.

“Reset/Drain”

button for at least 3 seconds; an

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06307

Black process 45.0° 150.0 LPI