Whirlpool AWOE 81010 GG, AWOE 8358 INSTRUCTION FOR USE

30106275GB.fm Page 1 Friday, April 10, 2009 3:16 PM

GB PROGRAMME CHART

A.Programme selector

B.Display

C.“Temperature” button

D.“Spin Speed” button

E.“Start delay” button

F.“Start (Pause)” button

G.“Reset/Drain” button

H.“Favourites” button

	B	L
	I
	}	J
	K
	G
	C	D
A	E	H
	F

I. Programme sequence indication

Add garment		Programme	Programme
		in process	finished

J.“Child lock” indication

K.“Detergent overdosage” indication

L.Red failure indications

			Tempe-											Max	Type of wash/Notes	Detergents and additives						Selectable options				Start	Spin
						Care								Load		Pre-	Main	Softener			Pre-			Easy	Intensive	delay 2)	Spin	Max
	Programme		rature													wash	wash				wash			ironing	rinse		Speed	Spin
					Labels
																												Speed
														kg	- Respect the manufacturer’s recommendations on the care label
																												rpm
			70 - 95 °C											8.0	Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of
															cotton and linen.	3)	Yes											max.
	Cotton /														At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization
			20 - 60 °C											8.0	of your laundry. The bacteria removal efficiency has been tested following a similar
	Coloured
															methodology to the NF EN 13697 standard of Nov. 2001.
	Synthetics		20 - 60 °C											3.5	Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide	3)	Yes											max.
															(Perlon, Nylon) or blends with cotton.
	Delicates		20 - 40 °C											2.5	Curtains and delicate clothing, dresses, skirts, shirts and blouses.	3)	Yes					—		—	—			1000 1)
		Wool													Only woollens, labelled with the Woolmark and identified as machine washable.	—	Yes				—	—		—	—			1000 1)
			20 - 40 °C											2.0	This programme (40°C) is tested and approved by The Woolmark Company for machine
															washable wool.
															Textiles made of silk, linen, wool and viscose marked as “handwashable”.	—	Yes				—	—		—	—			400 1)
			20 - 40 °C											2.0	This programme (40°C) is tested and approved by The Woolmark Company for
															handwashable wool.
	Lingerie		20 - 30 °C											2.0	This programme is particularly suitable to treat delicate lingerie (use of a laundry net	—	Yes				—	—		—	—			400 1)
															strongly recommended).
		Jeans	20 - 60 °C											7.0	Normally soiled cotton jeanswear and garments made of robust jeanslike material such as		Yes							—	—			max.
															trousers and jackets.
		Sport												3.5	Normally soiled and sweaty sportswear made of cotton jersey or microfibers.	—	Yes	—			—	—						max.
			20 - 30 °C												This programme includes a prewash cycle – you can add detergent also to the prewash chamber.
															Do not add any softener.
															Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of
															cotton and linen.
			20 - 60 °C											8.0	Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run	—	Yes				—	—		—				max.
															overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning
															at night, set spin speed to “0” and start spin programme in the morning, or define programme
															start with “Start delay” accordingly.
			20 - 60 °C											6.0	Slightly to normally soiled textiles made of cotton and/or synthetics.	—	Yes				—	—						max.
			20 - 30 °C											3.0	Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with cotton.	—	Yes				—	—		—	—			max.
Rinse & Spin			—			—								8.0	Same as the last rinse and the final spin in the “Cotton” programme.	—	—				—	—		—				max.
		Spin	—			—								8.0	In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.	—	—	—			—	—		—	—			max.

:

1)

2)

3)

optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes. Do not use liquid detergent when activating the “Start Delay”.

Do not use liquid detergent for the main wash when activating the “Prewash” option.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of	Whirlpool is a registered trademark of Whirlpool USA
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0702	5019 301 06275

Black process 45.0° 150.0 LPI

30106275GB.fm Page 2 Friday, April 10, 2009 3:16 PM

CONSUMPTION DATA

	Programme			Temperature	Load	Water	Energy	Approx. Programme Duration
				(°C)	(kg)	(l)	(kWh)	(hours : minutes)*
				95	8.0	82**	2.40	2:10
	Cotton / Coloured***			60	8.0	64	1.36	2:20
	Cotton / Coloured			40	8.0	77	0.75	2:05
		Synthetics		60	3.5	46**	0.85	1:35
		Synthetics		40	3.5	42	0.50	1:20
		Delicates		30	2.5	60	0.40	0:45
			Wool	40	2.0	60	0.60	0:45
				40	2.0	45	0.60	0:40
		Lingerie		40	2.0	60	0.35	0:36
			Jeans	40	7.0	95	0.80	2:21
			Sport	30	3.5	54	0.55	1:34
				60	8.0	75	0.95	4:00
				40	6.0	73	0.60	1:00
				30	3.0	30	0.20	0:15

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

*The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

***Reference Programme for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. Turn the programme selector to the desired programme; the light of the “Start (Pause)” button blinks. The temperature and spin speed indicated on the display can be altered by pressing the “Temperature” button or the “Spin Speed” button.

SELECT ANY DESIRED OPTION

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

•Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

•Do not use liquid detergent for the main wash when activating the “Prewash” option.

“Clean+” button

•Choose this option if you use an in-wash additive for stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

•Selectable for programmes “Cotton” and “Synthetics”; choose temperature of 30 or 40°C and use with maximum load.

•Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

•Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen basis. Chlorine or perborate bleaches must not be used!

“Easy ironing” button

•Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier.

•Increases the water quantity and the clothes are spun very gently.

“Intensive rinse” button

•More water is added and rinse cycle is prolonged.

•This option is particularly suitable for areas with very soft water or for washing baby linen, and helps people with allergies.

“Spin Speed” button

•Every programme has a predefined spin speed.

•Press the button to set another spin speed.

•If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

•If you select “Rinse hold” , the laundry remains in the last rinse water without progressing to the final spin cycle, to avoid

creasing and prevent colours from changing. To activate the “Rinse hold”, press the “Spin Speed” button repeatedly until the “Rinse hold” symbol on the display lights up.

-The wash programme stops to “Rinse hold” when the “Rinse hold” symbol on the display blinks; the light of

“Start (Pause)” blinks as well.

-To terminate the “Rinse hold” by draining the water, without any spinning, press the “Start (Pause)” button.

-To terminate the “Rinse hold” by spinning the laundry, press the “Spin Speed” button to select the desired spin speed and then “Start (Pause)” to start the spin cycle.

-Do not leave the laundry to soak for too long in the “Rinse hold”.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed and option(s), push and hold the “Favourites” button for at least 3 seconds. The lamp next to “Favourites” shortly blinks and then lights up - the programme setting is saved.

Next time you want to use your individual programme setting, select the programme, push the “Favourites” button and start by pushing “Start (Pause)”.

If you want to replace the saved programme setting by another one, proceed as already described above.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

•Select programme, temperature, spin speed and options.

•Press the “Start delay” button to select a delay time from 0:30 to 23:00 hours.

•Press the “Start (Pause)” button.

The countdown of the delay time begins; the clock symbol next to the delay time and the colon between hours and minutes blink.

•The time delay indication disappears when the programme

starts and it is replaced by the remaining programme time.

To cancel the “Start delay”

..before you press the “Start (Pause)” button:

• Select another programme or press the “Reset/Drain” button.

..after having pressed the “Start (Pause)” button:

Press the “Reset/Drain” button for at least 3 seconds; the start delay time disappears from the display.

“ADD GARMENT” INDICATION

Before starting a programme, the symbol lights to show that the door can be opened to add more washing. As soon as you press “Start (Pause)”, the door will lock until the end of the programme and must on no account be forced open. In case you have to open it urgently during a running programme, refer to “Reset a running programme before the end”.

If you try to start a wash programme and the door is not properly closed, the “Add garment” indication will blink.

PROGRAMME START

Open the tap and press the “Start (Pause)” button; the blinking “Start (Pause)” button light becomes constant. The “Add garment” indication goes out, and the lit bubbles indicate that the programme is in process. In some phases, the remaining programme time is newly calculated - if this is the case, the “6th sense” indication on the display will fade.

CHILD LOCK

Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock:

•Turn the programme selector to a programme position, or run a programme as usual.

•Press the “Temperature” and the “Spin Speed” button

simultaneously for at least 3 seconds. The “Child lock” symbol

will shortly blink and then light up to indicate that the

child lock is active.

The programme setting cannot be changed anymore; the only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock:

•Press again the 2 buttons marked with the key symbol simultaneosuly for at least 3 seconds.

RED FAILURE INDICATIONS

If one of the red failure indications on the display lights up, refer to the “Troubleshooting Guide” in your “Instructions for Use”.

PROGRAMME END

•The display shows “End”, and the “Programme finished” indication lights up.

1.Turn the programme selector to the “Off/O” position.

2.Close the water tap.

3.Open the door and unload the machine.

•Leave the door ajar to allow the drum to dry.

•If you do not turn the programme selector to the “Off/O” position, the washing machine will switch off automatically after a few minutes.

DETERGENT OVERDOSAGE INDICATION

This indication lights up when you added too much detergent. It can appear either when a wash programme is finished, or when too much foam interrupted the wash programme - in this case refer to the “Troubleshooting Guide” in your Instructions for Use to manage the programme interruption.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1.Press the “Start (Pause)” button to pause the programme. The light blinks.

2.Select the new programme, temperature, any options and another spin speed if you want.

3.Press the “Start (Pause)” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

RESET A RUNNING PROGRAMME BEFORE THE END

The “Reset/Drain” button cancels a programme before the end.

•Press the “Reset/Drain” button for at least 3 seconds; an animation appears on the display. Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06275

Black process 45.0° 150.0 LPI