Whirlpool AWOE 81000 C W, AWOE 81200 C WP INSTRUCTION FOR USE

30106263GB.fm Page 1 Wednesday, March 4, 2009 5:30 PM

GB	PROGRAMME CHART

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B.“Service” indication

C.“Water tap closed” indication

D.“Clean pump” indication

C D

H

}

E

A B

I

J

F

Max.

Type of wash/Notes

Tempe-

Care

Load

Programme

rature

Labels

kg

- Respect the manufacturer’s recommendations on the care label

White Cotton /

70 - 95 °C

8.0

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton

Antibacterial

and linen.

At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of

Cotton

20 - 60 °C

8.0

your laundry. The bacteria removal efficiency has been tested following a similar methodology to

the NF EN 13697 standard of Nov. 2001.

Synthetics

20 - 60 °C

3.5

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide

(Perlon, Nylon) or blends with cotton.

Delicates

20 - 40 °C

2.5

Curtains and delicate clothing, dresses skirts, shirts and blouses.

Wool

20 - 40 °C

2.0

Only woollens, labelled with the Woolmark and identified as machine washable.

This programme (40°C) is tested and approved by The Woolmark Company for machine

washable wool.

Handwash

20 - 40 °C

2.0

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

This programme (40°C) is tested and approved by The Woolmark Company for handwashable

wool.

Baby clothes

20 - 60 °C

7.0

Normally soiled baby clothes made of cotton and/or linen.

In this programme, the washing liquid is rinsed out even more thoroughly and thus helps to protect

sensitive baby skin.

Big Items

20 - 60 °C

3.0

Blankets made of synthetic fibres; bed covers filled with feathers, polyester or other artificial

fibres; sleeping bags, bathmats and similar items.

Sport

20 - 30 °C

3.5

Normally soiled and sweaty sportswear made of cotton jersey or microfibers.

This programme includes a prewash cycle – you can add detergent also to the prewash chamber. Do not

add any softener.

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton

and linen.

SuperEco

20 - 60 °C

8.0

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight

to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin

speed to “0” and start spin programme in the morning, or define programme start with “Start Delay”

accordingly.

Daily load

20 - 60 °C

6.0

Slightly to normally soiled textiles made of cotton and/or synthetics.

Speed 15

20 - 30 °C

3.0

Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with cotton.

Rinse & Spin

—

—

8.0

Same as the last rinse and the final spin in the “Cotton” programme.

Spin

—

—

8.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

E.Programme selector

F.“Start (Pause)” button

			L							G. “Variable spin” button
			K								(incl. “Rinse hold”				)
										H. Programme sequence indicator
										I.	“Reset/Drain” button					/
										J.	“Start delay” button
										K.	“Temperature” button
				G						L.	Display
Detergents and additives												Special options						Max
Pre-		Main				Softener			Start	Pre-		Eco	Easy		Intensive		Variable	Spin
wash		Wash							delay	wash			ironing		rinse		spin	Speed
																		rpm
		Yes																max.
		Yes																max.
		Yes										—	—		—			1000 1)
—		Yes								—		—	—		—			1000 1)
—		Yes								—		—	—		—			400 1)
		Yes											—		—			max.
		Yes										—	—					1000 1)
		Yes				—				—		—						max.
—		Yes								—		—	—					max.
—		Yes								—		—						max.
—		Yes								—		—	—		—			max.
—		—								—		—	—					max.
—		—				—				—		—	—		—			max.

: optional / Yes : dosing required	The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of
1) For improved garment care, spin speed is restricted in this programme.	Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the	Whirlpool is a registered trademark of Whirlpool USA
	instructions on the garment label and those issued in this programme chart. M0702	5019 301 06263

Black process 45.0° 150.0 LPI

30106263GB.fm Page 2 Wednesday, March 4, 2009 5:30 PM

CONSUMPTION DATA

	Programme	Temperature	Load	Water	Energy	Approx. Programme Duration
		(°C)	(kg)	(l)	(kWh)	(hours : minutes)*
	White Cotton / Antibacterial	95	8.0	82**	2.40	2:10
	Cotton	60	8.0	77	1.52	2:10
	Cotton with “Eco”***	60	8.0	64	1.36	2:20
	Cotton	40	8.0	77	0.75	2:05
	Synthetics	60	3.5	46**	0.85	1:35
	Synthetics	40	3.5	42	0.50	1:20
	Delicates	30	2.5	60	0.40	0:45
	Wool	40	2.0	60	0.60	0:45
	Handwash	40	2.0	45	0.60	0:40
	Baby clothes	40	7.0	95	0.80	2:21
	Big Items	40	3.0	74	0.75	1:30
	Sport	30	3.5	54	0.55	1:34
	SuperEco	60	8.0	75	0.95	4:00
	Daily load	40	6.0	73	0.60	1:00
	Speed 15	30	3.0	30	0.20	0:15

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

*The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

***Reference Programme for Energy Label (with separator in detergent dispenser removed for use of powder detergent).

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Load your laundry, close the door properly and add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use (remove separator in detergent dispenser for use of powder detergent if necessary).

1.Turn the programme selector to the desired programme. The display shows the programme duration

in hours and minutes as well as the predefined temperature. The “Start (Pause)” button blinks.

2.The temperature can be altered by pressing the “Temperature” button.

3.The indication lamp of the predefined spin speed

lights up; in case you want to set another spin speed, press the “Variable spin” button .

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up.

When the combination of programme and option is not possible, the lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

•Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

•Do not use liquid detergent for the main wash when

activating the Prewash option.

“Eco” button

•With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.

“Easy ironing” button

•Helps to make ironing easier.

•Increases the water quantity and the clothes are spun very gently.

“Intensive rinse” button

•More water is added and rinse cycle is prolonged.

•This option is particularly suitable for areas with very soft

water, washing baby linen and helping people with allergies.

“Variable spin” button (incl. “Rinse hold” )

•Every programme has a predefined spin speed.

•Press the button to set another spin speed.

•If you select spin speed “0”, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

•If you select “Rinse hold” , the laundry remains in the last rinse water without progressing to the final spin

cycle to avoid creasing and prevent colours from changing.

-Select “Rinse hold” if you want to postpone spinning to a later time or if you want to drain only.

-Do notleavethelaundry to soakinthe rinsehold for toolong.

-The programme stops to “Rinse hold” when the “Rinse hold” light in the programme sequence indicator is on; the “Start (Pause)” button light blinks.

-To terminate the “Rinse hold” by draining the water, without any spinning, press the “Start (Pause)” button .

-To terminate the programme by spinning the laundry, press the “Variable spin” button to select the desired spin speed and then the “Start (Pause)” button to start the spin cycle.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

•Select programme, temperature and options.

•Press the “Start delay” button to select a delay time up to 23 hours; the light of the “Start (Pause)” button blinks.

•Press the “Start (Pause)” button ; the countdown of the delay time begins. The light of the “Start (Pause)” button is on; the light of the start delay button will keep blinking until the programme starts.

•As soon as the programme starts, the start delay on the display is replaced by the remaining programme time, and the light of the “Start delay” button goes off.

•Once having pressed the “Start (Pause)” button , the number of hours preselected can be changed by

pressing and holding the “Start delay” button.

To cancel the “Start delay”

..before you press “Start (Pause)” :

•Turn the programme selector to another position or press the “Reset/Drain” button / .

..after having pressed “Start (Pause)” :

•Press “Start (Pause)” - the delay time disappears from the display; press “Start (Pause)” again to start the selected programme immediately.

PROGRAMME START

Open the tap and press “Start (Pause)” ; the light stops blinking and is on. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The display shows the remaining programme time. Due to

variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the display.

CHILD LOCK

Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/ O” position. To activate the child lock:

•Turn the programme selector to a programme position, or run a programme as usual.

•Press the 2 buttons marked with the key symbol

simultaneously for at least 3 seconds; a key-like symbol will shortly appear on the display to indicate that the child lock is active.

Any time you try to change a programme setting with active child lock, the display will shortly show the key-like symbol. The programme setting cannot be changed anymore; the only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock:

Black process 45.0° 150.0 LPI

•Press again the 2 buttons marked with the key symbol

simultaneously for at least 3 seconds.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Reset a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

•The display shows “End” and the “Door open” indication lights.

1.Turn the programme selector to the “Off/O” position.

2.Close the water tap.

3.Open the door and unload the machine.

4.Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1.Press “Start (Pause)” to pause the programme; the light blinks.

2.Select the new programme, temperature, any options and another spin speed if you want.

3.Press “Start (Pause)” again. The light is on, and the programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

RESET A RUNNING PROGRAMME BEFORE THE END

The “Reset/Drain” button / cancels a programme before the end.

•Press the “Reset/Drain” button / for at least 3 seconds; “rES” appears on the display. Any existing water is drained before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06263