Whirlpool AWOE 7508 INSTRUCTION FOR USE

30106332GB.fm Page 1 Monday, November 23, 2009 6:32 PM

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Programme

White Cotton /

Antibacterial

Cotton Algod.

Tempe-

rature

70 - 95 °C

20 - 60 °C

Care

Labels

C D

Max. Load

- Respect the manufacturer’s recommendations on the care label

7.0

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of your laundry . The bacteria removal effici ency has been tested following

7.0

a similar methodology to the NF EN 13697 standard of Nov. 2001.

Type of wash/Notes

}

A B

F. “Start (Pause)” button G. “Variable spin” button

H. Programme sequence indicator

E. Programme selector

I J

I. “Reset/Drain” button J. “Start delay” button

K. “Temperature” button

delay

Inicio

diferido

L. Display

Pre-

Eco

wash

Prelav.

Eco

Easy

ironing

Intensive

rinse

Aclar./enx.

Intensivo

Variable

spin

Centrif.

Max Spin

Speed

rpm

max.

Detergents and additives Special options

Pre-

Main

Wash

Yes

Softener Start

❉❉❉❉❉ ❉❉

wash

❉

Synthetics Sintéticos

Delicates Delicados

Wool Lana/lã

Handwash

Baby /

fabric

Big Items Edredón

Sport Sport

SuperEco

Daily load

Speed 15

Rinse & Spin Aclar./enx. & Centrif.

Spin Centrifug.

optional / Yes : dosing required

❉

For improved garment care, spin speed is restricted in this programme.

Baby /

fabric

20 - 60 °C

20 - 40 °C 20 - 40 °C

20 - 40 °C

20 - 60 °C

20 - 30 °C

20 - 60 °C

20 - 30 °C

—— ——

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),

3.5

polyamide (Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

2.5

Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for

2.0

machine washable wool. Textiles made of silk, linen, wool and viscose marked as “handwashable”.

This programme (40°C) is tested and approved by The Woolmark Company for

2.0

handwashable wool. Normally soiled baby clothes made of cotton and/or linen.

In this programme, the washing liquid is rinsed out even more thoroughly and thus helps to

7.0

protect sensitive baby skin.

Blankets made of synthetic fibres; bed covers filled with feathers, polyester or other

3.0

artificial fibres; sleeping bags, bathmats and similar items. Normally soiled and sweaty sportswear made of cotton jersey or microfibers.

This programme includes a prewash cycle – you can add detergent also to the prewash

3.5

chamber. Do not add any softener.

Normally to heavily soiled and robust bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be

7.0

run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start Delay” accordingly.

Slightly to normally soiled textiles made of cotton and/or synthetics.

6.0

Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with

3.0

cotton.

Use lowest recommended detergent amount.

Same as the last rinse and the final spin in the “Cotton” programme.

7.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

7.0

programme.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702

Yes

❉

Yes

❉

Yes

—

Yes

—

Yes

❉

Yes

❉

Yes

❉

Yes

—

Yes

—

Yes

— ——

❉❉❉❉❉ ❉❉ ❉❉❉

❉❉

❉❉❉❉

❉❉❉

—

❉❉

❉❉ ❉❉

❉❉

—— —

—— — —

——

❉

❉❉❉

—— —

——

❉❉❉

—— — — —— — —— — —

❉

Whirlpool is a registered trademark of Whirlpool USA

max.

1000 1000

400

max.

1000

max.

max. max.

❉ ❉

❉

❉❉

❉

❉❉

❉

5019 301 06332

Black process 45.0° 150.0 LPI

30106332GB.fm Page 2 Monday, November 23, 2009 6:32 PM

CONSUMPTION DATA

Programme

White Cotton / Antibacterial 95 7.0 74

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* ** ***

Cotton 60 7.0 54 1.19 2:20

Cotton with “Eco”

Cotton 40 7.0 69 0.75 2:05 Synthetics 60 3.5 46 Synthetics 40 3.5 42 0.50 1:20

Delicates 30 2.5 60 0.40 0:45

Wool 40 2.0 60 0.60 0:45 Handwash 40 2.0 45 0.60 0:40 Baby fabric 40 7.0 86 0.75 2:21

Big Items 40 3.0 74 0.75 1:30

Sport 30 3.5 54 0.55 1:34

SuperEco 60 7.0 69 0.84 4:00

Daily load 40 6.0 73 0.60 1:00

Speed 15 30 3.0 30 0.20 0:15

The time indicated on the display can deviate from the valu es in the table, because it takes into account the operation conditi ons applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. Reference Programme for Energy Label.

***

Temp e r ature

(°C)

60 7.0 54 0.91 4:00

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Load your laundry, close the door properly and add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the

2. The

3. The indication lamp of the predefined

programme selector

programme. The display shows the programme duration in hours and minutes as well as the predefined temperature. The

temperature

“Temperature” button. lights up; in case you want to set another spin speed,

press the “Variable spin” button.

“Start (Pause)”

can be altered by pressing the

to the desired

button blinks.

spin speed

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and option is not possible, the lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soi led lo ad s (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the Prewash option.

“Eco” button

• With a modified temperature profile and a prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.

Load

Water

(kg)

“Easy ironing” button

• Helps to make ironing easier.

• Increases the water quantity and the clothes are spun

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If you select spin speed “0”, the final spinning is

•If you select

Energy

(l)

(kWh)

2.10 2:10

0.85 1:35

very gently.

water , washing baby linen and helping people with allergies.

cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

“Rinse hold”

rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

-Select

- Do not leave the laundry to soak in the rinse hold for too long.

- The programme stops to “Rinse hold” when the “Rinse

-To terminate the “Rinse hold” by draining the

- To terminate the programme by spinning the

“Rinse hold”

spinning to a later time or if you want to drain only.

hold” light in the programme sequence indicator is on; the “Rinse hold” light of the “Variable spin” button and the

“Start (Pause)”

water, without any spinning, press the

(Pause)”

laundry, press the “Variable spin” button to select the desired spin speed and then the

(Pause)”

Approx. Programme Duration

(hours : minutes)

, the laundry remains in the last

if you want to postpone

button light blink.

button.

button to start the spin cycle.

“Start

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select a delay time up to 23 hours; the light of the

•Press the the delay time begins. The light of the button is on; the light of the start delay button will keep blinking until the programme starts.

• As soon as the programme starts, the start delay on the display is replaced by the remaining programme time, and the light of the “Start delay” button goes off.

• Once having pressed the number of hours preselected can be changed by pressing and holding the “Start delay” button.

To cancel the “Start delay” ..before you press “Start (Pause)”:

• Turn the programme selector to another position or press the

..after having pressed “Start (Pause)”:

• Press from the display; press the selected programme immediately.

“Start (Pause)”

“Reset/Drain”

“Start (Pause)”

button; the countdown of

“Start (Pause)”

button.

- the delay time disappears

“Start (Pause)”

button blinks.

“Start (Pause)”

button, the

again to start

PROGR AMME START

Open the tap and press blinking and is on. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case,

an animation appears on the display

“Start (Pause)”

; the light stops

CHILD LOCK

Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/ O” position. To activate the child lock:

• Turn the programme selector to a programme position, or run a programme as usual.

• Press the 2 buttons marked with the key symbol

Any time you try to change a programme setting with active child lock, the display will shortly show the key-like symbol. The programme setting cannot be changed anymore; the only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock:

simultaneously for at least 3 seconds; a key-like symbol will shortly appear on the display to indicate that the child lock is active.

• Press again the 2 buttons marked with the key symbol simultaneously for at least 3 seconds.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Reset a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply; a signal sounds. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• The display shows “End” and the “Door open”

indication lights.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press

2. Select the new programme, temperature, any options

3. Press

“Start (Pause)”

light blinks. and another spin speed if you want.

“Start (Pause)”

programme continues continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

to pause the programme; the

again. The light is on, and the

RESET A RUNNING PROGRAMME BEFORE THE END

The

“Reset/Drain”

• Press the

“rES” appears on the display. Any existing water is drained before the door can be opened.

button cancels a programme before the end.

“Reset/Drain”

Whirlpool is a registered trademark of Whirlpool USA

button for at least 3 seconds;

5019 301 06332

Black process 45.0° 150.0 LPI