Whirlpool AWOE 1000 INSTRUCTION FOR USE

GB	PROGRAMME CHART

A. “Door open” indicator

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B.“Service” indicator

C.“Water tap closed” indicator

D.“Clean pump” indicator

		C L					A
				}
D										B
								M

F

E

G J I K

O

H

}

N

E.Programme selector

F.“Start/Pause” button

G.“Temperature” button

H.“Spin” button (incl. “Rinse hold”)

I.“Cycle end” button

J.“Dosing Aid” button

K.“Soil level” button

L.Eco monitor

M.“Reset/Drain” button

N.Child lock button combination

O.Detergent overdosage indicator

Fabrics

Colours

Specials Eco

i:

1)

Tempe-

Max.

Type of wash/Notes

Detergents and additives

Selectable options

Dosing

Cycle

Spin

Care

Load

Pre-

Main

Softener

Colours 15°

Rapid

Pre-

Intensive

Soil

aid

end

Spin

Max.

Programme

rature

Labels

wash

wash

wash

rinse

level

Spin

kg

- Respect the manufacturer’s recommendations on the care label

/

Speed

rpm

Mixed

cold-60°C

6.0

Lightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.

—

Yes

i

i

—

—

i

i

i

i

i

max.

Effective one-hour programme. Make sure to wash only similar colours together in one wash load.

i

i

i

i

i

i

i

i

i

i

Cotton

cold-95°C

10.0

Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and linen.

Yes

max.

Synthetics

cold-60°C

3.5

Normally soiled garments made of artificial fibres (like polyester, polyacryle, viscose etc.) or their

i

Yes

i

i

i

i

i

i

i

i

i

max.

blends with cotton.

Delicates

cold-40°C

2.5

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

i

Yes

i

i

—

i

—

i

i

i

i

1000 1)

Wool/Handwash

cold-40°C

2.0

Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles

—

Yes

i

i

—

—

—

i

i

i

i

1000 1)

made of silk (keep to care label!), linen, wool and viscose marked as handwashable.

This programme is tested and approved by The Woolmark Company for machineand handwashable wool.

White

cold-60°C

10.0

Normally to heavily soiled and robust white cotton laundry.

—

Yes

i

i

—

—

i

i

i

i

i

max.

Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in

addition to your detergent.

Light colours

cold-60°C

6.0

White and pastel shaded garments made of delicate fabrics.

i

Yes

i

i

—

i

—

i

i

i

i

1000 1)

Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if

necessary also stain removers or bleaches on oxygen basis.

Dark

cold-60°C

6.0

Black and dark garments made of cotton, cotton blends and polyester.

i

Yes

i

i

i

i

i

i

i

i

i

1000 1)

Special programme to reduce colour fading and local discolouration. Prefer to use a special liquid

detergent for dark garments with this programme.

EcoCotton

cold-60°C

10.0

Normally soiled cotton laundry.

—

Yes

i

i

—

—

i

i

i

i

i

max.

At 40°C and 60°C most favourable programme in terms of combined water and energy consumption for

washing cotton laundry. - Reference programme for the Energy Label.

AquaEco

cold-40°C

3.0

Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.

—

Yes

—

i

—

—

—

—

i

i

i

max.

Saving programme with a very low water consumption. Use liquid detergent and the lowest

recommended amount for 3kg laundry. Do not use softener.

Speed 15

cold-30°C

3.0

Briefly worn clothing made of cotton, artificial fibres and blends with cotton.

—

Yes

i

i

—

—

—

—

i

i

i

max.

Refresh programme. Use lowest recommended detergent amount.

Bedlinen

cold-95°C

3.5

White and coloured bedlinen made of cotton and synthetic fibres, or blends of both.

i

Yes

i

i

—

i

i

i

i

i

i

max.

Reduces microbes and gently cleans, also delicate bedlinen. A thorough rinse phase helps to prevent

detergent and pollen residues. Prefer powder detergent for this programme.

Big Items

cold-60°C

3.0

Blankets made of synthetic fibres; bedcovers filled with feathers, polyester or other artificial

i

Yes

i

i

—

i

i

i

i

i

i

1000 1)

fibres; sleeping bags, bathmats and similar items.

Rinse & Spin

—

—

10.0

Rinse and intensive spin programme.

—

—

i

—

—

—

i

—

—

i

i

max.

Same as the last rinse and the final spin in the “Cotton” programme.

optional / Yes : dosing required

The wool/handwash cycle of this machine has been tested and approved by The Woolmark Company for the

Whirlpool is a registered trademark of Whirlpool USA

For improved garment care, spin speed is restricted in these programmes.

washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are

washed according to the instructions on the garment label and those issued in this programme chart. M0702

5019 301 06654

- the sensor technology adapts water, energy and programme duration to the size of your wash load

CONSUMPTION DATA

	Temperature	Load	Water	Energy	Approx. Programme Duration
Programme					(hours : minutes)
	(°C)	(kg)	(l)	(kWh)	without “Rapid”	with “Rapid”
Mixed	40	6.0	65	0.65	1:00	—
Cotton	95	10.0	90**	2.80	2:30	—
Cotton	60	10.0	70	1.70	2:20	1:35
Cotton	40	10.0	90	0.95	2:05	1:15
Easy Care (Synthetics)	60	3.5	48**	0.95	1:35	1:10
Easy Care (Synthetics)	40	3.5	45	0.55	1:20	0:55
Delicates	40	2.5	60	0.65	0:50	—
Wool/Handwash	40	2.0	45	0.60	0:40	—
White	40	10.0	85	1.00	2:20	—
Light colours	40	6.0	70	0.50	1:20	—
Dark	40	6.0	49	0.60	1:40	1:15
EcoCotton*	60	10.0	66	1.30	4:00	—
EcoCotton*	60	5.0	43	0.80	3:00***	—
EcoCotton*	40	5.0	43	0.70	3:00***	—
AquaEco	40	3.0	19	0.45	1:00	—
Speed 15	30	3.0	30	0.20	0:15	—
Bedlinen	60	3.5	60	1.30	2:00	—
Big Items	40	3.0	70	0.75	1:30	—

Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature.

Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).

*Reference programmes for Energy Label.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.

***Automatic adaptation of programme duration after detection of wash load.

LOAD LAUNDRY, CLOSE DOOR AND

SELECT PROGRAMME

Load the laundry, close the door and turn the programme selector to the desired programme; the “Start/Pause” indicator blinks. The temperature and spin speed shown on the display can be altered by pressing the “Temperature” button or the “Spin” button . If you do not use the “Dosing Aid” , add detergent now.

SELECT OPTIONS IF DESIRED

If the combination programme/option or option/option is not possible, the indicator switches off automatically. For certain programmes, an option may already be preset; if you want you can deselect it.

“Colours 15°” button

•Saves energy used for water heating while maintaining a good wash result.

•Supports colour maintenance when washing coloured laundry.

•Recommendable for lightly soiled laundry without stains.

•Make sure that your detergent is suitable for cold wash temperatures (15 or 20 °C).

•Not selectable for Cotton 70 - 95°C.

“Rapid” button

•Enables quicker washing by shortening the programme duration.

•Recommendable for only lightly soiled laundry.

•Not selectable for Cotton 70 - 95°C.

“Prewash” button

•Adds a prewash cycle to the wash programme selected; prolongs the programme by about a quarter of an hour.

•Recommended for heavily soiled laundry (e.g. containing sand or granular dirt).

•Do not use liquid detergent for the main wash when activating the “Prewash” option.

“Intensive rinse” button

•More water is added and rinse cycle is prolonged.

•Particularly suitable for areas with very soft water or for washing baby linen, and helps people with allergies.

“Soil level” button

•Adapts the programme duration to the soil level of your laundry. Also influences the detergent quantity recommendation when using the “Dosing Aid” button.

= lightly soiled - = normally soiled - = heavily soiled Not all soil levels are selectable for each programme.

“Spin” button (incl. “Rinse Hold” )

•Every programme has a predefined spin speed.

•Press the button to set another spin speed.

•If you select spin speed “0”, the final spinning is cancelled and the water is drained out only. However, intermediate spin phases remain during the rinse.

•If you select “Rinse hold” , the laundry remains in the last rinse water without progressing to the final spin cycle, to avoid creasing and prevent colours from changing. To activate the

“Rinse hold”, press the “Spin” button repeatedly until the “Rinse hold” symbol on the display lights up.

-The wash programme stops to “Rinse hold” when the

“Rinse hold” symbol on the display blinks; the “Start/ Pause” indicator blinks as well.

-To terminate the “Rinse hold” by spinning the laundry, press “Start/Pause” - the laundry will be spun with the default spin speed. You can also select another spin speed with the “Spin” button before you start the spin cycle with “Start/Pause”.

-To terminate the “Rinse hold” by draining the water without spinning, press the “Spin” button until spin speed “0” appears on the display; then press “Start/Pause” to start the draining.

-Do not leave the laundry to soak for too long in the “Rinse hold” (especially silk!).

SET CYCLE END

With this function you can postpone your programme to complete at a later time: press the button to select in how many hours the programme shall be finished. Thus, it allows you to have your laundry ready ata particular time and toprofit from more favourable energy rates during the night, for example.

•Do not use liquid detergent when activating this function.

•The time until the “Cycle end” can be selected in full hour time segments (1 to 24 h). When you press the button, the shortest possible time will be displayed; keep on pressing the button to loop through all the available times. To remove it again, keep on pressing the button until you see the value “0:00”.

•When you have selected the desired time until the “Cycle end”, press “Start/Pause” - the countdown will begin.

•During the countdown, you can still modify the programme setting (select or deselect options, change spin speed etc.). If the modifications prolong the programme duration so that it overruns the originally set time until the “Cycle end”, the programme will start immediately.

•Sometimes the programme may finish before the selected time until the “Cycle end” has expired (e.g. for small loads). In this case, the washing machine will tumble the laundry regularly to keep it fresh, until the selected “Cycle end” time has expired. During tumbling, the display will show an animation. The tumbling phase can be stopped at any time either by pressing any button or by rotating the programme selector; the animation will stop and the door will unlock in about 1 minute as indicated on the display.

DETERGENT DOSING RECOMMENDATION

With the “Dosing Aid” button, you can make your washing machine indicate you the recommended detergent quantity for your wash load, depending on the soil level selected and the size of the load.

•Helps to save detergent and protect the environment and also sensitive skin by avoiding detergent overdosing.

•Before you use this function, you must adapt the washing machine to the dosing amounts which are recommended for the detergents you use. Also check if your region’s water hardness corresponds with the water hardness level “soft” of your washing machine - if not adapt it.

•Select programme, options and cycle end BEFORE using the “Dosing Aid” button.

For any details, refer to the separate “Dosing Aid” Instructions for Use.

“DOOR OPEN” INDICATOR

Before starting and after end of a programme, the indicator lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Reset a running programme before the end”.

ECO MONITOR

The “Eco monitor” gives you a rough feedback about the power consumption of the programme setting you selected.

As soon as you turn the programme selector to any programme, the “Eco monitor” is on.

less more

The indicator on the left is to show that the “Eco monitor” is active. The four indicators next to it show the degree of consumption: the less power your programme setting is forecasted to consume, the less indicators will light up. This depends on the programme, temperature and options selected, and also on the size of the wash load. For that reason, the forecasted degree of power consumption

PROGRAMME START

Open the tap and press the “Start/Pause” button . The “Start/Pause” indicator lights up. When the laundry load is detected or the programme duration is adapted, the display shows an animation.

CHILD LOCK

Prevents children from starting a wash cycle or changing the settings of a running programme. Cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock:

•Turn the programme selector to a programme position, or run a programme as usual.

•Press the 2 buttons marked with the key symbol simultaneously for at least 3 seconds. A key-like symbol will shortly

appear on the display to indicate that the child lock is active.

Any time you try to change a programme setting with active child lock, the display will briefly show the key-like symbol. The programme setting cannot be changed anymore. The only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock, proceed in the same way as for activating it.

FAILURE INDICATORS

If one of the failure indicators lights up, or in case of any malfunction, consult the “Troubleshooting Guide” in your Instructions for Use.

Spin speed on display blinks: Unbalance during spinning.

PROGRAMME END

•The “Door open” indicator lights up. The display shows

“End”.

1.Turn the programme selector to the “Off/O” position.

2.Close the water tap.

3.Open the door and unload the machine.

4.Leave the door ajar to allow the drum to dry.

DETERGENT OVERDOSAGE INDICATOR

The symbol will light up at the end of the programme if you used too much detergent. Use less detergent next time.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1.Press the “Start/Pause” button to pause the programme. The indicator blinks.

2.Select the new programme, temperature, any options and another spin speed if you want.

3.Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

RESET A RUNNING PROGRAMME BEFORE THE END

The “Reset/Drain” button cancels a programme before the end.

•Press and hold the “Reset/Drain” button for a few seconds; an animation appears on the display. The water is drained out; it may last some time until you can open the door.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06654