Whirlpool AWO/D 9900 INSTRUCTION FOR USE
30105992GB.fm Page 1 Friday, November 20, 2009 11:02 AM
GB AWO/D 9900 PROGRAMME CHART
A. “On/Off” button
B. Programme selection buttons
C. Option buttons
D. “Favourite” button
E. “Temperature” button
F. “Start delay” button
G. “Variable spin” button
H. “Start/Pause” button
I. “Drain/Reset” button
J. Display
Programme
White Cotton Cotone bianco
Cotton Cotone
Synthetics Sintetici
70 - 95 °C
50 - 60 °C
20 - 40 °C
20 - 60 °C
Tempe-
rature
Care
Labels
D E F G
Max
Load
- For temperature selection, respect the manufacturer’s
recommendations on the care label
kg
7.0
Normally to heavily soiled bed linen, table linen and
7.0
underwear, towels, shirts etc. made of cotton and linen.
6.0
Normally soiled blouses, shirts, overalls etc. made of
2.5
polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or
blends with cotton.
Type of wash/Notes
H
A
B
I
}
C
Detergents and
additives
Pre-
Main
wash
wash
3)
Yes
❉
3)
Yes
❉
K. Programme sequence indication
J
KL N
}
L. “Door open” indication
M. “Buttons locked” indication
O
Your washing machine is equipped with
P
automatic safety functions which detect
and diagnose faults at an early stage
and react appropriately, e.g.:
M
N. “Water tap closed” indication
O. “Clean pump” indication
P. “Service” indication
Softener Eco
plus
Eco
plus
Easy
ironing
Stiro
facile
Special options
Pre-
Intensive
wash
Pre-
Risciacquo
lavaggio
intensivo
rinse
Rinse
hold
Anti
piega
Start
delay
Avvio
ritardato
2)
Variable
Centrifuga
variabile
❉❉❉ ❉ ❉ ❉ ❉ ❉
❉❉❉ ❉ ❉ ❉ ❉ ❉
spin
Spin
Max
Spin
Speed
rpm
max.
1000
1)
Daily load
Quick wash
Delicates Delicati
Wool Lana
Handwash
Short Spin Centrifuga breve
Spin Centrifuga
Rinse & Spin
Drain Scarico
optional / Yes : dosing required
❉
:
1)
For improved garment care, spin speed is restricted in these programmes.
2)
Do not use liquid detergent when activating the “Start Delay”.
3)
Do not use liquid detergent for the main wash when activating the “Prewash” option.
Black process 45.0° 150.0 LPI
Rapido
(30 min)
Lavaggio
a mano
Risciacquo
& Centrifuga
20 - 60 °C
20 - 30 °C
20 - 40 °C
20 - 40 °C
20 - 40 °C
——
——
——
———
3.0
3.0
1.5
1.0
1.0
1.0
7.0
7.0
Slightly to normally soiled textiles made of cotton and/or
synthetics.
Shortly worn outer clothing made of cotton, polyester,
polyamide and blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and
blouses.
Only woollens, labelled with the woolmark and identified
as machine washable.
Textiles made of silk, linen, wool and viscose marked as
“handwashable”.
In this programme spinning is gentle. Same as the spin cycle
in the “Wool” programme.
In this programme spinning is intensive. Same as the spin
cycle in the “Cotton” programme.
Same as the last rinse and the final spin in the “Cotton”
programme.
Drain only - no spinning. Alternative method of terminating
programme after “Rinse Hold”. Press “Reset/Drain” and then
“Start/Pause” to start the “Drain” programme.
Yes
—
Yes
—
3)
Yes
❉
Yes
—
Yes
—
—
❉
❉
❉
❉
❉
❉
—— — —
——
—— — —
—— — —
—
❉
❉❉❉ ❉
❉❉ ❉
—
❉❉ ❉
❉❉ ❉
❉❉ ❉
—— ——— — — —
—— ——— — — —
——
—— —
❉
❉❉❉ ❉
❉❉
❉❉
max.
max.
1000
1000
400
1000
max.
max.
1)
—— ——— — — — — — —
Whirlpool is a registered trademark of Whirlpool USA
5019 301 05992
1)
1)
1)
30105992GB.fm Page 2 Friday, November 20, 2009 11:02 AM
CONSUMPTION DATA
Programme
Tempera t u r e
(°C)
White Cotton 95 7.0 70
Load
(kg)
Water
(l)
**
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
2.10 2:10
*
Cotton 60 7.0 65 1.33 2:20
Cotton with “Eco plus”
***
60 7.0 60 1.19 2:30
Cotton 40 6.0 62 0.75 2:05
Synthetics 60 2.5 50
0.80 1:35
**
Synthetics 40 2.5 46 0.40 1:20
Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.30 0:30
Delicates 30 1.5 60 0.50 0:45
Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
The time indicated on the display can deviate from the values in the table, because it takes into account the household
*
conditions applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
**
Reference Programme for Energy Label.
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives”
in your Instructions for Use.
1. Push the
“On/Off”
button . The blue light
circle signals that the washer is switched on.
2. Select the
desired programme
by pushing the
corresponding programme button; it is marked
by a blue light.
3. The
temperature
and
spin speed
indicated on
the display can be altered by pressing the
“Temperature” button or the “Variable
spin” button .
SELECT ANY DESIRED OPTION
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Eco plus” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Easy ironing” button
• Can be used together with “Cotton”,
“Synthetics” and “Daily load” programmes to
make ironing easier.
• Increases the water quantity and the clothes are
spun very gently.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time
by approximately 15 min.
• Do not use liquid detergent for the main wash
when activating the Prewash option.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with
very soft water or for washing baby linen, and
helps people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only .
• If you select “Rinse hold”, do not leave the laundry
to soak for too long.
The programme stops to “Rinse hold” at
Note:
the time the “Rinse hold” symbol on the display
lights up. The blue light under the
button flashes.
Pause”
“Start/
Terminate the “Rinse hold” option:
• Press the
“Start/Pause”
button ; the
programme will terminate automatically with the
final spin cycle for the present wash programme.
• If you do not wish to spin the clothes, push the
“Drain/Reset” button and then the
“Start/Pause”
button to start the Drain programme.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
SAVE YOUR FAVOURITE PR OGRAMMES
If there is a programme setting which you use
frequently, the appliance offers the possibility to
save one setting for each programme so that it can
be used again by just pushing one button.
• Select the desired programme, temperature, spin
speed and option(s), push and hold the
“Favourites”
The lamp next to
button for at least 3 seconds.
“Favourites”
shortly flashes
and then lights up - the programme setting is saved.
Next time you want to use your individual
programme setting, select the programme, push the
“Favourites”
“Start/Pause”
button and start by pushing
.
If you want to replace the saved programme
setting by another one:
• Push the programme button, select temperature,
spin speed and options as desired and then press
and hold the
“Favourites”
button for at least
3 seconds. The previously saved programme
setting will be replaced by the new one.
START DELAY
The “Start Delay” allows to run the machine at
the consumer’s convenience, for example at night
when electricity is cheaper.
• Select programme, temperature, spin speed and
options.
• Press the “Start Delay” button to select the delay
time up to 23 hours.
• Press the
“Start/Pause”
button.
The countdown of the delay time begins; the clock
symbol next to the delay time and the dot between
hours and minutes flash.
•The time delay indication disappears when the
programme starts and it is replaced by the
remaining programme time.
• Once having pressed the
“Start/Pause”
the number of hours preselected can be reduced
by pressing and holding the “Start Delay”
button. From 1 hour on, the delay time can also
be reduced by minutes.
To cancel the “Start Delay”
..before you press the “Start/Pause” button:
• Select another programme or press the
button.
Reset”
..after having pressed the “Start/Pause” button:
• Press the
“Drain/Reset”
button - the start
delay time disappears from the display.
PROGR AMME START
Open the tap and press the
The blue light under the
“Start/Pause”
“Start/Pause”
button .
button
is on. The programme sequence indicator shows
the current programme phase, running from top to
bottom through Wash, Rinse, Spin/Drain.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
symbol lights to show that the door can be opened.
As long as a wash programme is running, the door
remains locked and must on no account be forced
button,
“Drain/
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
LOCK BUTTONS
You can lock the buttons of the control panel against
improper use (e.g. by children).
• Press the temperature and the spin speed button
simultaneously and hold them for at least 3
seconds. The key symbol on the display lights up.
• To unlock the buttons again: proceed in the same
way.
RED INDICATIONS ON THE DISPLAY
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
“Service”
Lighting up of the “Service” indication can be caused by
a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
PROGRAMME END
• The symbols of the programme sequence
indicator are dark, and the “Door open”
symbol lights up.
1. Switch the machine off by pushing
“On/Off”
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
“Start/Pause”
button to pause
the programme. The light flashes.
2. Select the new programme, temperature, any
options and another spin speed if you want.
3. Press the
“Start/Pause”
button again. The
new programme continues at the same position
where the previous programme was interrupted.
Do not add detergent for this programme.
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
“Drain/Reset”
button cancels a programme
before the end.
• Press the
“Drain/Reset”
button for at least 3
seconds. Any existing water is drained out
before the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 05992
.
Black process 45.0° 150.0 LPI
Loading...