Whirlpool AWO/D9361 INSTRUCTION FOR USE

30106042aGB.fm Page 1 Tuesday, October 16, 2007 10:10 AM

GB PROGRAMME CHART

A.“On/Off” button

B.Programme selection buttons

C.Option buttons

D.“Favourite” button

E.“Temperature” button

F.“Start delay” button

G.“Variable spin” button

H.“Start/Pause” button

I.“Drain/Reset” button

J.Display

M	H		L	}C	K
N			O
						J
D B	A	I		E	F	G

K.Programme sequence indication

L.“Door open” indication

Your washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

M.“Water tap closed” indication

N.“Clean pump” indication

O.“Service” indication

		Tempe-									Max	Type of wash/Notes	Detergents and additives				Special options				Start	Spin
											Load										delay
					Care								Pre-	Main	Softe-	Eco	Easy	Pre-	Intensive	Rinse		Variable	Max
Programme		rature
				Labels								- For temperature selection, respect the manufacturer’s	wash	Wash	ner		ironing	wash	rinse	hold		spin	Spin
																							Speed
											kg	recommendations on the care label
																							rpm
White Cotton /		95 °C									6.0	Normally to heavily soiled bed linen, table linen and underwear,
Antibacterial
												towels, shirts etc. made of cotton and linen.
		60 °C									6.0	At a temperature of 95°C, this programme eliminates bacteria,		Yes 3)							2)		max.
Cotton												ensuring sanitization of your laundry. The bacteria removal
												efficiency has been tested following a similar methodology to the
		- 40 °C									5.0	NF EN 13697 standard of Nov. 2001.
Synthetics		- 60 °C									2.5	Normally soiled blouses, shirts, overalls etc. made of polyester		Yes 3)							2)		max
												(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Daily load		- 60 °C									3.0	Slightly to normally soiled textiles made of cotton and/or	—	Yes		—		—			2)		max.
												synthetics.
Quick wash		- 30 °C									3.0	Shortly worn outer clothing made of cotton, polyester, polyamide	—	Yes		—	—	—	—		2)		max.
												and blends with cotton.
Delicates		- 40 °C									1.5	Curtains and delicate clothing, dresses skirts, shirts and blouses.		Yes 3)		—	—		—		2)		max
												Only woollens, labelled with the Woolmark and identified as
Wool		- 40 °C									1.0	machine washable.	—	Yes		—	—	—	—		2)		max
												This programme (40°C) is tested and approved by The Woolmark
												Company for machine washable wool.
												Textiles made of silk, linen, wool and viscose marked as
Handwash		- 40 °C									1.0	“handwashable”.	—	Yes		—	—	—	—		2)		400 1)
												This programme (40°C) is tested and approved by The Woolmark
												Company for handwashable wool.
Spin		—			—						6.0	In this programme spinning is intensive. Same as the spin cycle in the	—	—	—	—	—	—	—	—			max.
												“Cotton” programme.
Rinse & Spin		—			—						6.0	Same as the last rinse and the final spin in the “Cotton” programme.	—	—		—	—	—					max.
Drain		—			—						—	Drain only - no spinning. Alternative method of terminating	—	—	—	—	—	—	—	—	—	—	—
												programme after “Rinse Hold”. Press “Drain/Reset” and then “Start/
												Pause” to start the programme.

:

1)

2)

3)

optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes. Do not use liquid detergent when activating the “Start Delay”.

Do not use liquid detergent for the main wash when activating the “Prewash” option.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart.

M0620

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06042/A

Black process 45.0° 100.0 LPI

30106042aGB.fm Page 2 Tuesday, October 16, 2007 10:10 AM

CONSUMPTION DATA

	Programme	Temperature	Load	Water	Energy	Approx. Programme Duration
		(°C)	(kg)	(l)	(kWh)	(hours : minutes)*
	Cotton / Antibacterial	95	6.0	59**	1.90	2:00
	Cotton	60	6.0	56	1.14	2:10
	Cotton with “Eco”***	60	6.0	49	1.02	2:20
	Cotton	40	5.0	56	0.70	2:00
	Synthetics	60	2.5	50**	0.80	1:35
	Synthetics	40	2.5	46	0.50	1:20
	Daily load	40	3.0	41	0.50	1:00
	Quick wash (30 min.)	30	3.0	41	0.40	0:30
	Delicates	30	1.5	60	0.50	0:45
	Wool	40	1.0	60	0.50	0:45
	Handwash	40	1.0	45	0.50	0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * The time indicated on the display can deviate from the values in the table, because it takes into account the household

conditions applicable at that time.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

*** Reference Programme for Energy Label.

						“Intensive rinse” button
	ADD DETERGENTS, CLOSE THE DOOR
						•	More water is added and rinse cycle is prolonged.
	AND SELECT THE PROGRAMME
						•	This option is particularly suitable for areas with
	Add detergent as indicated on the front page and as
							very soft water or for washing baby linen, and
	described in the chapter “Detergent and Additives”						helps people with allergies.
	in your Instructions for Use.					“Rinse hold” button
	1.	Push the “On/Off” button			. The blue light
						•	The laundry remains in the last rinse water
		circle signals that the washer is switched on.
							without progressing to the final spin cycle to avoid
	2. Select the desired programme by pushing the
		corresponding programme button; it is marked					creasing and prevent colours from changing.
	3.	by a blue light.				•	This option is particularly recommended for the
		The temperature and spin speed indicated on the					programmes “Synthetics”, “Daily load” and
		display can be altered by pressing the
							“Delicates”.
		“Temperature” button		or the “Variable spin”
						•	It is particularly useful if you want to postpone
		button	.
							spinning to a later time, or if you want to drain only.
	SELECT ANY DESIRED OPTION					• If you select “Rinse hold”, do not leave the laundry
	When the combination of programme and additional						to soak for too long.
	option(s) is not possible, the indication lights switch off						Note: The programme stops to “Rinse hold” at
	automatically. Unsuitable combinations of options are						the time the “Rinse hold” symbol			on the
	deselected automatically.
							display lights up. The blue light under the
	“Eco” button
							“Start/Pause” button		flashes.
	• With a modified temperature profile and a slightly
		prolonged washing duration, the optimum				Terminate the “Rinse hold” option				:
		combination of excellent washing result and even				•	Press the “Start/Pause” button			; the
		lower energy consumption is achieved.					programme will terminate automatically with the
	“Easy ironing” button						final spin cycle for the present wash programme.
	•	Can be used together with “Cotton”,
						• If you do not wish to spin the clothes, push “Drain/
		“Synthetics” and “Daily load” programmes to
							Reset”	and then start the Drain programme
		make ironing easier.
	•	Increases the water quantity and the clothes are					by pushing the “Start/Pause” button			.
		spun very gently.				“Variable spin” button
	“Prewash” button					•	Every programme has a predefined spin speed.
	•	Only for heavily soiled loads (for example sand,
						•	Press the button to set another spin speed.
		granular dirt) sensible. Increases the cycle time
						•	If spin speed “0” is selected, the final spinning is
		by approximately 15 min.
	•	Do not use liquid detergent for the main wash					cancelled but intermediate spin peaks remain
		when activating the Prewash option.					during rinse. The water is drained out only.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.

•Select the desired programme, temperature, spin speed and option(s), push and hold the “Favourites” button for at least 3 seconds.

The lamp next to “Favourites” shortly flashes and then lights up - the programme setting is saved.

Next time you want to use your individual programme setting, select the programme, push the “Favourites” button and start by pushing

“Start/Pause”.

If you want to replace the saved programme setting by another one:

•Push the programme button, select temperature, spin speed and options as desired and then press

and hold the “Favourites” button for at least 3 seconds. The previously saved programme setting will be replaced by the new one.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

•Select programme, temperature, spin speed and options.

•Press the “Start Delay” button to select a delay time of 1, 3, 6, 9 or 12 hours.

•Press the “Start/Pause” button .

The countdown of the delay time begins; the clock symbol on the display and the delay time selected flash.

•The delay time and the clock symbol disappear when the programme starts.

•The number of hours preselected can be reduced by pressing again the “Start Delay” button.

To cancel the “Start Delay”

•Select another programme or press the

“Drain/Reset” button .

PROGRAMME START

Open the tap and press the “Start/Pause” button . The blue light under the “Start/Pause” button is on. The programme sequence indicator shows the current programme phase, running from top to bottom through Wash, Rinse, Spin/Drain.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

PROGRAMME END

•The light of the programme sequence indicator is off, and the “Door open” indication lights up.

1.Switch the machine off by pushing “On/Off” .

2.Close the water tap.

3.Open the door and unload the machine.

4.Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1.Press the “Start/Pause” button to pause the programme. The light flashes.

2.Select the new programme, temperature, any options and another spin speed if you want.

3.Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

The “Drain/Reset” button cancels a programme before the end.

•Press the “Drain/Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06042/A

Black process 45.0° 100.0 LPI