Whirlpool AWO/D 8952, BLZM 6100/IN INSTRUCTION FOR USE
30106135GB.fm Page 1 Tuesday, January 8, 2008 10:58 AM
GB PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Max
Programme
Cotton /
Antibacterial
40 - 60 - 95 °C
Synthetics
40 - 60 °C
Daily load
40 °C
Quick wash
30 °C
Delicates
30 - 40 °C
Wool
Cold - 40 °C
Handwash /
Lingerie
30 - 40 °C
Big Items
40 °C
SuperEco
60 °C
Rinse & Spin Rinçage & Essorage
Spin Essorage
Gentle Spin Essorage doux
Drain Vidange
❉
optional / Yes : dosing required
:
1)
For improved garment care, spin speed is restricted in these programmes.
Coton
40 - 60 - 95 °C
Synthétique
40 - 60 °C
40 °C
30 °C
Délicat
30 - 40 °C
Laine
Froid
- 40 °C
Lavage main /
Lingerie
30 - 40 °C
Duvet
40 °C
60 °C
Care
Labels
—
—
—
——
Load
kg
8.0
3.5
6.0
6.0
2.5
2.0
2.0
3.0
8.0
8.0
8.0
2.0
C
D
Type of wash/Notes
- Respect the manufacturer’s recommendations on the care label
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.
Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of
your laundry. The bacteria removal efficiency has been tested following a similar
methodology to the NF EN 13697 standard of Nov. 2001.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
polyamide (Perlon, Nylon) or blends with cotton.
Slightly to normally soiled textiles made of cotton and/or synthetics.
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with
cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for
machine washable wool.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
Up to a temperature of 30°C, this cycle is particularly suitable to treat delicate
lingerie (use of a laundry net strongly recommended).
This programme (40°C) is tested and approved by The Woolmark Company for
handwashable wool.
Blankets made of synthetic fibres; bed covers fi lled with feathers, polyester or
other artificial fibres; sleeping bags, bathmats and similar items.
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and/or linen.
Offers highest economy in energy consumption by prolonged wash duration. Ideal to be
run overnight to additionally profit from the more favourable energy rates. To avoid
noise of spinning at night, set spin speed to “0” and start spin programme in the
morning, or define programme start with “Start Delay” accordingly.
Same as the last rinse and the final spin in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton”
programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Drain only - no spinning. Alternative method of terminating programme after “Rinse
Hold”.
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark
garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment
label and those issued in this programme chart. In the UK and Ireland, the Woolmark trademark is a certification trademark. M0702
H
E
}
F
E. Programme selector
A
B
F. “Start/Pause” button
G. “Variable spin” button
H. Programme sequence indicator
I. “Reset” button
I
J
K
Detergents and additives Special options
Pre-
Main
wash
❉
❉
—
—
❉
—
—
❉
—
——
—— — — —
—— — — —
Softener Clean+ Pre-
wash
Yes
❉❉❉❉❉❉❉❉
Yes
❉❉❉❉❉❉❉❉
Yes
❉
Yes
❉
Yes
❉
Yes
❉
Yes
❉
Yes
❉
Yes
❉
❉
G
wash
Pré-
lavage
——
——
—
——
——
—
——
——
J. “Start delay” button
K. Time display
Start
delay
Départ
différé
ironing
Anti
froissage
Intensive
rinse
Rinçage
plus
Rinse
hold
Arrêt cuve
pleine
Easy
❉❉ ❉ ❉❉
——
❉
❉❉
❉
❉
❉❉
❉
❉
❉
❉
——
——
——
—
—
—
❉❉❉
❉❉❉
❉❉❉
———
———
❉❉
❉❉
❉❉
❉❉
Variable
spin
Essorage
variable
❉
❉
Max
Spin
Speed
rpm
max.
1000
max.
max.
1000
1000
400
1000
max.
max.
max.
1000
—— — — — — — — — — —
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06135
1)
1)
1)
1)
1)
1)
Black process 45.0° 100.0 LPI
30106135GB.fm Page 2 Tuesday, January 8, 2008 10:58 AM
CONSUMPTION DATA
Programme
Temperatu r e
(°C)
Cotton / Antibacterial 95 8.0 82
Cotton
***
60 8.0 69 1.36 2:20
Load
(kg)
Water
(l)
**
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
2.40 2:10
*
Cotton 40 8.0 77 0.85 2:05
Synthetics 60 3.5 48
0.95 1:35
**
Synthetics 40 3.5 44 0.55 1:20
Daily load 40 6.0 79 0.70 1:00
Quick wash 30 6.0 72 0.35 0:30
Delicates 30 2.5 60 0.45 0:50
Wool 40 2.0 60 0.65 0:45
Handwash 40 2.0 45 0.65 0:40
Lingerie 30 2.0 45 0.35 0:36
Big Items 40 3.0 74 0.75 1:30
SuperEco 60 8.0 75 0.95 4:00
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions
*
applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before th e pump drains the w ater out.
**
Reference Programme for Energy Label.
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
1. Turn the
programme and temperature.
2. The
programme (in hours and minutes), and the
Pause”
3. The indication lamp of the predefined
programme selector
time display
indication lamp flashes.
shows the duration of the chosen
to the desired
“Start/
spin speed
lights up.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the respective
indication lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Clean+” button
• Choose this option if you use an in-wash additive for
stain removal (powder, for example “Vanish”) - it will
optimize the additive’s efficiency to get better wash
performance and stain removal.
• Selectable for programmes “Cotton” and “Synthe tics”;
choose temperature of 30 or 40°C and use with
maximum load.
• Add an appropriate amount of in-wash additive for stain
removal (powder) to the main wash chamber, together
with your detergent (only use powder detergent with this
option). Respect the manufacturer’s dosing instructions.
• Prolongs the programme by approx. 10 to 15 minutes.
• Appropriate for use of stain removers and bleaches on
oxygen basis.
not be used!
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt)
sensible. Increases the cycle time by approximately 15 min.
• Do not use liquid detergent for the main wash when
activating the “Prewash” option.
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics” and
“Daily load” programmes to make ironing easier.
• Increases the water quantity and the clothes are spun
very gently.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft
water, washing baby linen and helps people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and “Delicates”.
• It is particularly useful if you want to postpone spinning
to a later time, or if you want to drain only.
• If you select “Rinse hold” do not leave the laundry
items to soak for too long.
Note:
time the “Rinse hold” light in the programme sequence
indication is on. The indication lamp next to the
Pause”
Chlorine or perborate bleaches must
The programme stops to “Rinse hold” at the
“Start/
button flashes.
Terminate the “Rinse hold” option:
• Press the
terminate automatically with the final spin cycle for the
present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector to the “Drain” programme and
press the
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.
“Start/Pause”
“Start/Pause”
button; the programme will
button.
START DELAY
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent when
activating the “Start Delay”.
• Select programme, temperature and options.
• Press the “Start Delay” button to select the delay time
by 1 to 23 hours;
• Press the
The indication light over the “Start Delay” button
flashes and the countdown of the delay time begins.
• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.
• Once having pressed the
number of hours preselected can be reduced by
pressing again the “Start Delay” button.
To cancel the “Start Delay”
..before you press the “Start/Pause” button:
• Turn the programme selector to another position or
press the
..after having pressed the “Start/Pause” button:
• Press the
start delay time disappears from the time display.
“Start/Pause”
“Reset”
“Reset”
button.
“Start/Pause”
button.
button for at least 3 seconds - the
button, the
PROGR AMME START
Open the tap and press the
indication lamp next to the
up. The programme sequence indicator shows the current
programme phase, running from left to right through
Wash, Rinse, Spin/Drain.
The time display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme phases. If this is
the case, an animation appears on the time display.
“Start/Pause”
“Start/Pause”
button. The
button lights
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Cancel (Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
programme. The light flashes.
2. Select the new programme (with temperature), any
options and another spin speed if you want.
3. Press the
programme continues at the same position where the
previous programme was interrupted. Do not add
detergent for this programme.
“Start/Pause”
“Start/Pause”
button to pause the
button again. The new
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
• Press the
button cancels a programme before the end.
“Reset”
button for at least 3 seconds;
“Reset”
“rES” appears on the display. Any existing water is
drained out before the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06135
Black process 45.0° 100.0 LPI
Loading...