Whirlpool AWO/D 6507 W, AWO/D6507/IS INSTRUCTION FOR USE
30106001GB.fm Page 1 Tuesday, January 30, 2007 5:29 PM
GB AWO/D 6507 PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Programme
White Cotton /
Antibacterial
Coloured
Cotton
Synthetics Synthetics
Daily load Daily load
Quick wash
Delicates Delicates
Jeans Jeans
Lingerie Lingerie
Wool Wool
Handwash
Rinse & Spin Rinse & Spin
Spin Spin
Gentle Spin Gentle Spin
Drain Drain
❉
: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in these programmes.
Cotton
Coloured
Cotton
Quick wash
Handwash
Tempe-
rature
70 - 95 °C
50 - 60 °C
20 - 40 °C
20 - 60 °C
20 - 60 °C
20 - 30 °C
20 - 40 °C
20 - 60 °C
20 - 30 °C
20 - 40 °C
20 - 40 °C
——
——
——
———
Care
Labels
Max
Load
- For temperature selection, respect the manufacturer’s
kg
recommendations on the care label
Normally to heavily soiled bed linen, table linen and underwear,
7.0
towels, shirts etc. made of cotton and linen.
At a temperature of 80°C or more, this programme eliminates
7.0
bacteria, ensuring sanitization of your laundry. The bacteria
removal efficiency has been tested following a similar
6.0
methodology to the NF EN 13697 standard of Nov. 2001.
Normally soiled blouses, shirts, overalls etc. made of polyester
(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with
2.5
cotton.
Slightly to normally soiled textiles made of cotton and/or
3.0
synthetics.
Shortly worn outer clothing made of cotton, polyester,
3.0
polyamide and blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
Normally soiled cotton jeanswear and garments made of robust
6.0
jeanslike material such as trousers and jackets.
Particularly suitable to treat delicate lingerie (use of a laundry net
1.0
strongly recommended).
Only woollens, labelled with the woolmark and identified as
machine washable.
1.0
This programme (40°C) is tested and approved by The
Woolmark Company for machine washable wool.
Textiles made of silk, linen, wool and viscose marked as
“handwashable”.
1.0
This programme (40°C) is tested and approved by The
Woolmark Company for handwashable wool.
Same as the last rinse and the final spin in the “Cotton”
7.0
programme.
In this programme spinning is intensive. Same as the spin cycle in
7.0
the “Cotton” programme.
In this programme spinning is gentle. Same as the spin cycle in the
1.0
“Wool” programme.
Drain only - no spinning. Alternative method of terminating
programme after “Rinse Hold”.
C
D
H
F
E
Type of wash/Notes
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company
for the washing of Woolmark garme nts labelled as “machine wash” or “hand wash” pr ovided that the garments
are washed according to the instructions on the garment label and those issued in this programme chart.
E. Programme selector
F. “Start/Pause” button
A
L
G. “Variable spin” button
H. Programme sequence indicator
I. “Reset” button
I
JBK G
J. “Start delay” button
K. “Temperature” button
L. Display
Detergents and additives Special options
Pre-
Main
wash
❉
❉
—
—
❉
❉
—
—
—
——
Softener Eco Pre-
Wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
❉❉❉❉ ❉ ❉❉❉
❉❉❉❉ ❉ ❉❉❉
❉
❉
❉
❉❉❉❉
❉
❉
❉
❉
——
——
—
——
——
——
——
—— — ——
—— — ——
Start
wash
delay
❉❉ ❉❉❉
❉
❉❉
❉
❉
❉
❉
❉
❉
Easy
ironing
Intensive
——
——
——
——
——
——
—
Rinse
rinse
hold
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉❉
———
———
Variable
spin
❉
❉
—— — ——— — — —— —
Whirlpool is a registered trademark of Whirlpool USA
M0620
5019 301 06001
Max
Spin
Speed
rpm
max.
1000
max.
max.
1000
max.
400
1000
400
max.
max.
1000
1)
1)
1)
1)
1)
1)
Black process 45.0° 100.0 LPI
30106001GB.fm Page 2 Tuesday, January 30, 2007 5:29 PM
CONSUMPTION DATA
Programme
Temperature
(°C)
White Cotton / Antibacterial 95 7.0 70
Load
(kg)
Water
(l)
**
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
2.10 2:10
*
Cotton 60 7.0 65 1.33 2:20
Cotton with “Eco”
***
60 7.0 60 1.19 2:30
Cotton 40 6.0 62 0.75 2:05
Synthetics 60 2.5 50
0.80 1:35
**
Synthetics 40 2.5 46 0.40 1:20
Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.30 0:30
Delicates 30 1.5 60 0.50 0:45
Jeans 40 6.0 82 0.75 2:20
Lingerie 30 1.0 45 0.40 0:40
Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
The time indicated on the display can deviate from the values in the table, because it takes into account the household
*
conditions applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle , before the pump drains the water out.
**
Reference Programme for Energy Label.
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives”
in your Instructions for Use.
1. Turn the
programme selector
to the desired
programme. The display shows the programme
duration in hours and minutes as well as the
predefined temperature. The
“Start/Pause”
button flashes.
2. The
temperature
can be altered by pressing
the “Temperature” button.
3. The indication lamp of the predefined
spin speed
lights up; in case you want to set another spin
speed, press the “Variable spin” button.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the
respective indication lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time
by approximately 15 min.
• Do not use liquid detergent for the main wash
when activating the Prewash option.
“Easy ironing” button
• Can be used together with “Cotton”,
“Synthetics” and “Daily load” programmes to
make ironing easier.
• Increases the water quantity and the clothes are
spun very gently.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only .
• If you select “Rinse hold”, do not leave the laundry
to soak for too long.
The programme stops to “Rinse hold” at
Note:
the time the “Anticrease” light in the programme
sequence indicator is on. The indication lamp
next to the
“Start/Pause”
button flashes.
Terminate the “Rinse hold” option:
• Press the
“Start/Pause”
button; the
programme will terminate automatically with the
final spin cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain” p rogramme
and press the
“Start/Pause”
button.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
START DELAY
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent
when activating the “Start Delay”.
• Select programme, temperature and options.
• Press the “Start Delay” button to select the delay
time by 1 to 23 hours;
• Press the
“Start/Pause”
button.
The indication light next to the “Start Delay”
button lights up and the countdown of the delay
time begins. The dot between hours and
minutes of the delay time indicated flashes.
•The time delay indication disappears when the
programme starts and it is replaced by the
remaining programme time.
• Once having pressed the
“Start/Pause”
button,
the number of hours preselected can be reduced
by pressing and holding the “Start Delay”
button. From 1 hour on, the delay time can also
be reduced in steps of 10 minutes.
To cancel the “Start Delay”
..before you press the “Start/Pause” button:
• Turn the pro gramme selector to another
position or press the
“Reset”
button.
..after having pressed the “Start/Pause” button:
• Press the
“Reset”
button for at least 3 seconds - the
start delay time disappears from the display .
PROGR AMME S TART
Open the tap and press the
indication lamp next to the
“Start/Pause”
“Start/Pause”
button. The
button lights
up. The programme sequence indicator shows the
current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.
The display shows the remaining programme time.
Due to variations in load and temperature of inlet
water, the remaining time is newly calculated in certain
programme phases. If this is the case,
appears on the display
.
an animation
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
lamp lights to show that the door can be opened. As
long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by
a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence
indicator are off, and the “Door open”
indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
“Start/Pause”
button to pause the
programme. The light flashes.
2. Select the new programme, temperature, any
options and another spin speed if you want.
3. Press the
“Start/Pause”
button again. The new
programme continues at the same position
where the previous programme was interrupted.
Do not add detergent for this programme.
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
“Reset”
button cancels a programme before
the end.
• Press the
“Reset”
button for at least 3
seconds. Any existing water is drained out
before the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06001
Black process 45.0° 100.0 LPI
Loading...